wolverin0
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/09/15 17:07:18
- Status: offline
- Ribbons : 0
Im having an issue with my new CLC 280 I have to manually move the fans for them to start moving. After that, the RPM of the fans is shown on the software. I can even move the bar to raise de RPM, but if I go too low on RPM, the fans stop spinning again. And I have to raise the bar, and start them manually again youtube video https:// www.youtube .com/ watch?v=KoWeu9R8BtE&feature Everything on the motherboard seems ok... but I don't know, Z390 seems to be buggy with this AIO Pump.. any suggestions ?
post edited by wolverin0 - 2019/10/18 23:27:05
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: CLC 280 fans not starting automatically
2019/10/19 00:15:13
(permalink)
Have you set the mobo fan header manually in the BIOS to run at 100% DC?..If not, do that..And which header do you have it connected to?
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
coolmistry
CLASSIFIED Member
- Total Posts : 2502
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: CLC 280 fans not starting automatically
2019/10/19 02:50:20
(permalink)
bob16314
Have you set the mobo fan header manually in the BIOS to run at 100% DC?..If not, do that..And which header do you have it connected to?
+1 Make sure you have put 4 pins on to PWM fan and set fan to 100% not left on Auto. Please read pages 4b it about how to install correct Closed Loop Water Cooling Kit  EDIT? did you pins up 2 pins from two fans into one pin to the pump?
post edited by coolmistry - 2019/10/19 03:06:03
Windows 11 Home 64bits up to Dated i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
wolverin0
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/09/15 17:07:18
- Status: offline
- Ribbons : 0
Re: CLC 280 fans not starting automatically
2019/10/20 08:39:07
(permalink)
setting the fan to auto, and PWM, and voltage, and manual 100%, and full speed and....
i've tried EVERYTHING, i work with computer hardware for a living for almost 20 years and I cant believe this is so complicated to achieve in 2020... there are COUNTLESS of posts everywhere with people having problems to make A FAN SPIN
i've even tried to plug the fans directly to the motherboard, without using the Y, and they just dont spin.
ive tried the sys pump, the the sysfan the cpu fan, the cpu opt
maybe its something with the gigabytes motherboards, or the aorus ultra z390 (as ive read people having the exact or similar problem) and the lame fan software, or i really dont know anymore.
|
coolmistry
CLASSIFIED Member
- Total Posts : 2502
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: CLC 280 fans not starting automatically
2019/10/20 08:52:20
(permalink)
Is your cooler pump working? Seem your fans is faulty which will not spin! Maybe your CLC cooler is faulty but I advise your contact EVGA Customer Support which you start RMA!
Windows 11 Home 64bits up to Dated i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
wolverin0
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/09/15 17:07:18
- Status: offline
- Ribbons : 0
Re: CLC 280 fans not starting automatically
2019/10/20 09:09:56
(permalink)
Everything work if i start them manually. Two more samples videos to proof that everything "should be okay"...
VIDEO 1:
VIDEO 2:
|
coolmistry
CLASSIFIED Member
- Total Posts : 2502
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: CLC 280 fans not starting automatically
2019/10/20 09:15:34
(permalink)
I think it your CLC Cooler is faulty inside the pump cooler!! When you low the level for fan spin it stop  . It not like my one!!! Best way contract EVGA Customer support!
Windows 11 Home 64bits up to Dated i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
coolmistry
CLASSIFIED Member
- Total Posts : 2502
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: CLC 280 fans not starting automatically
2019/10/20 10:04:23
(permalink)
Let us know how getting on
Windows 11 Home 64bits up to Dated i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: CLC 280 fans not starting automatically
2019/10/20 10:26:31
(permalink)
A couple things.
I wonder who makes the fans..Should be on the sticker on the back..They're rated to run between 600 and 2200 RPM..Try different fans if you have any laying around..Since you plugged them directly to the motherboard and they still don't spin makes me think they're junk.
When you change the fan speed like you did in the video, shouldn't the 'APPLY' button in Flow Control light up and become clickable like in Precision when you change GPU fan speed?
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
wolverin0
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/09/15 17:07:18
- Status: offline
- Ribbons : 0
Re: CLC 280 fans not starting automatically
2019/10/20 19:04:37
(permalink)
bob16314
A couple things.
I wonder who makes the fans..Should be on the sticker on the back..They're rated to run between 600 and 2200 RPM..Try different fans if you have any laying around..Since you plugged them directly to the motherboard and they still don't spin makes me think they're junk.
When you change the fan speed like you did in the video, shouldn't the 'APPLY' button in Flow Control light up and become clickable like in Precision when you change GPU fan speed?
not to my experience. pump goes up on rpm without hitting apply. when i plug any of my case fans to the same pins that I plug the evga directly, they run perfectly normal...
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: CLC 280 fans not starting automatically
2019/10/20 19:49:38
(permalink)
Sounds like low voltage or damaged fans With power unplugged --> Do the fans turn smoothly ? The MB header is set to ? Which Z390 MB do you have ? & BIOS version ? OS details ? FAQ # 59773 "If you are experiencing issues with your CLC cooler such as not being able to control LED's or fan speed, there are a few steps to try."
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: CLC 280 fans not starting automatically
2019/10/20 20:35:03
(permalink)
wolverin0
i've even tried to plug the fans directly to the motherboard, without using the Y, and they just dont spin.
when i plug any of my case fans to the same pins that I plug the evga directly, they run perfectly normal...
This still tells me the EVGA fans are junk..Can you plug one of your case fans into the CLC 280 and see if it works okay..Or if necessary, go buy a fan that fits the CLC 280 fan connector for 10 bones or so..You can buy a fan anywhere PC parts/accessories are sold, even some supermarkets.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
wolverin0
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/09/15 17:07:18
- Status: offline
- Ribbons : 0
Re: CLC 280 fans not starting automatically
2019/10/20 20:53:21
(permalink)
Cool GTX
Sounds like low voltage or damaged fans
With power unplugged --> Do the fans turn smoothly ?
The MB header is set to ?
Which Z390 MB do you have ? & BIOS version ?
OS details ?
"If you are experiencing issues with your CLC cooler such as not being able to control LED's or fan speed, there are a few steps to try."
I truly can't believe that this is so tricky to do. It's all in the video, ive set all connectors to have PWM at full speed The mb is a Gigabyte Aorus Ultra z390 (which, again, i've found people having similar issues) The firmware is the latest (9b i think it is). The OS is Windows 10 latest version (which I don't see hows that relevant, if the fans should work even on the BIOS... ¿?) What does it mean "with power unplugged" ???
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: CLC 280 fans not starting automatically
2019/10/20 20:59:28
(permalink)
wolverin0
Cool GTX
Sounds like low voltage or damaged fans
With power unplugged --> Do the fans turn smoothly ?
The MB header is set to ?
Which Z390 MB do you have ? & BIOS version ?
OS details ?
"If you are experiencing issues with your CLC cooler such as not being able to control LED's or fan speed, there are a few steps to try."
I truly can't believe that this is so tricky to do.
It's all in the video, ive set all connectors to have PWM at full speed
The mb is a Gigabyte Aorus Ultra z390 (which, again, i've found people having similar issues)
The firmware is the latest (9b i think it is). The OS is Windows 10 latest version (which I don't see hows that relevant, if the fans should work even on the BIOS... ¿?)
What does it mean "with power unplugged" ???
remove plug from wall before turning fans by hand = "with power unplugged" NOT PWM ---> set MB Header to DC & full power
|
coolmistry
CLASSIFIED Member
- Total Posts : 2502
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: CLC 280 fans not starting automatically
2019/10/21 02:12:14
(permalink)
I had look up your motherboard if this is correct one? > Z390 AORUS ULTRAHave your try those pins below? 
Attached Image(s)
Windows 11 Home 64bits up to Dated i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
wolverin0
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/09/15 17:07:18
- Status: offline
- Ribbons : 0
Re: CLC 280 fans not starting automatically
2019/10/22 08:33:58
(permalink)
ive tried them on every single fan header with full speed
now it got even worse, i cant manually start the fans, until windows start and the evga software is open, if its closed, the fans stop completely and cant even start them manually.
2020 is only 2 months away!
|
coolmistry
CLASSIFIED Member
- Total Posts : 2502
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: CLC 280 fans not starting automatically
2019/10/22 08:47:19
(permalink)
Have you try reset your motherboard BIOS setting back default and setup those fans again the reason motherboard read the fans error speed RPM. I can remember my motherboard did once when I change new fans for case then I can hear so noise so I decide and give try reset my BIOS setting and it fix my fan more quiet!!!!
Have a go and try?
If not the start RMA?
Windows 11 Home 64bits up to Dated i9 11900K 5,275 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || 2 x Nvidia RTX 2080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3800mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: CLC 280 fans not starting automatically
2019/10/22 08:56:04
(permalink)
If your CLC is connected to a USB 3.0 port on the MB --> the USB 3.0 port will not work till your PC is inside Windows
|
wolverin0
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/09/15 17:07:18
- Status: offline
- Ribbons : 0
Re: CLC 280 fans not starting automatically
2019/11/13 07:02:09
(permalink)
Still can't solve this
I have to manually start them
I've tried every every every thing I could possible do with the MB settings.
Is there a way to override the PWM controls from my MB with an external controller or something like that?
|
Jerroh
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2012/03/02 17:29:00
- Status: offline
- Ribbons : 0
Re: CLC 280 fans not starting automatically
2019/11/17 19:04:29
(permalink)
Heyz, after fighting with this same exact issue for a while I decided to swap out the fans with 2 Rosewill Hyperborea 14cm fans. They have a max speed of 1300 rpm but at least they work properly, well they start automatically and adjust RPM. With the latest flow control software the APPLY button only lights up when I open fan curve so I doubt changes to pump speed gets saved to the CLC 280 unless profiles get saved directly to the CLC. Not sure what caused both the EVGA fans to stop working properly at the same time but they wont even start on their own while connected directly to the cpu fan header. Whatever has caused the issues one thing seems clear, it doesnt get removed when uninstalling or deleting the folder possibly also registry issues. Hopefully EVGA will send me 2 new fans.
I had uninstalled flow control and deleted the flow control folder then installed flow control 203 and at least that version allowed me to close flow control and have the fans keep spinning. this was before changing fans. Also I noticed in bios it showed the fans rpm even tho the fans were not spinning, I am guessing it was reading the pump which makes me think something in the code causes bios to read the pump which then thinks the fans are spinning so doesnt see a need to send more voltage or just plain thinks the fans are fine. someone needs to go thru the code. Or better yet dont try and pull all the power for the pump and the fans from one fan header. The USB 2 is used solely for the flow control software from what I read. If everything was working properly you would be able to uninstall flow control and disconnect the usb2 from the header and the CLC 280 would then use onboard profiles. But since it doesnt appear things are getting saved to the CLC 280 I wouldnt attempt doing this.
Sorry for the long post, I hope at least something can be useful.
My Mobo is the EVGA Z270 Classified K
Jerr
|