EVGA

Trying to get going again

Author
Post
Essentials Only Full Version
TheClassic
Superclocked Member
  • Total Posts : 187
  • Reward points : 0
  • Joined: 2009/02/08 08:06:24
  • Status: offline
  • Ribbons : 0
2019/09/17 19:57:41 (permalink)
I'm trying to start folding again. I've done this quite a bit in the past, but tend to stop over the summer. I just moved a machine to my basement and have it only connected to power and network. I remote desktopped in and am attempting to start the FAHClient and FAHControl but nothing happens (except I see console that says "Reading GPUs.txt".  Is this because I have discrete GPU and possibly and integrated GPU and nothing plugged in? I believe I have integrated GPU disabled in BIOS. Any ideas on how to get back on my feet?

Inspiron 530
Intel Core2 processor Q6600 (2.40Ghz 1066FSB) w/Quad Core Technology and 8MB cache
FoxConn G33M based Dell board
6GB DDR2 SDRAM at 800MHz
eVGA GTX 570 SC
OCZ StealthXStream OCZ600SXS 600W
Dell 20in E207WFP Flat Panel
 


#1

3 Replies Related Threads
    TheClassic
    Superclocked Member
    • Total Posts : 187
    • Reward points : 0
    • Joined: 2009/02/08 08:06:24
    • Status: offline
    • Ribbons : 0
    Re: Trying to get going again 2019/09/17 21:39:57 (permalink)
    I was able to get it running again by reinstalling, but I had to choose the option to "Start Now" at the end. We'll see if it starts next time I reboot. I don't normally choose "Start Now" because i install with admin privilege but my normal run-as user doesn't have admin, and this can cause strangeness. I remember having this particular problem in the past with the installer. No idea why I had to reinstall to get it to work.

    Inspiron 530
    Intel Core2 processor Q6600 (2.40Ghz 1066FSB) w/Quad Core Technology and 8MB cache
    FoxConn G33M based Dell board
    6GB DDR2 SDRAM at 800MHz
    eVGA GTX 570 SC
    OCZ StealthXStream OCZ600SXS 600W
    Dell 20in E207WFP Flat Panel
     


    #2
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Trying to get going again 2019/09/18 13:46:54 (permalink)
    Are you using the Web Interface or Advanced Client Mode.
    This is what I use and I copy the short cut form the Desktop and remove "Looking for Post" could not find it.

     
    I remove the --open-web-control and do not use the web interface.
    Easer to manage the CPU & CPU Slots and Settings, at least for me.

     
    At the Bottom https://www.flickr.com/photos/48137161@N00/albums/72157634529707065/page2 you will see how I install the Folding Client Software.
    I do not start automatically and set to Start Manually
    Just added this one
     
    post edited by bcavnaugh - 2019/09/18 14:03:03

    Associate Code: 9E88QK5L7811G3H


     
    #3
    ProDigit
    iCX Member
    • Total Posts : 465
    • Reward points : 0
    • Joined: 2019/02/20 14:04:37
    • Status: offline
    • Ribbons : 4
    Re: Trying to get going again 2019/09/24 20:11:51 (permalink)
    Did the client update to a newer version?
    #4
    Jump to:
  • Back to Mobile