The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Hi all, i got my new Nu Audio Card, with my Beyer T1.2 impresive sound. One thing i woundering about. When im listen to music and change the music volume, it got a very small crackle 0.5s maybe. Sounds like you change the volume on an 30 years old receiver, where the potentiometer are dirty. Is this normal? without volume changeing everything fine. EDIT: when ich change the volume permantly from low to high on windows, the crackle is permanetly there. If i stop this no crackle anymore, clear sound. And its on both outputs. Headphone and normal speaker. With my old Creative ZxR is dont have any problem. Many thanks, Prof
post edited by The_Professor - 2019/09/07 03:55:34
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/10 09:27:56
(permalink)
Hi all,
so my card will exchange, i will response here, if i still have the issues after the change or not.
BR Prof
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/11 09:35:50
(permalink)
So new card is there. Same small "crackle" No one any idea? Think that is normal, because two new cards have the same let my said "problem" Its not really a problem, only an beauty mistake. I use the following configuration. Asus XI Gene (bios 0602) with 8086k EVGA GTX1080Ti Black (Vertical mount with PCI-E Riser) EVGA NU Audio (newest driver 0.2.0.7 and Frimware 0.2B on the card itself) BeQuiet P11 550W Windows 10 1903 newest updates Beyerdynamic T1 2Gen 600Ohm
post edited by The_Professor - 2019/09/11 09:45:24
|
ViperSP
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2018/12/28 13:12:35
- Location: Scotland
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/12 23:27:11
(permalink)
Hi, this is happening to me as well just recently after the new driver update i started getting the crackling sound when the volume was turned up or when adjusting the volume. I'm currently eager to try new drivers.
Update: Bass beat causes the crackle through speakers.
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/13 07:41:20
(permalink)
Hi Viper, so do you also try an older driver version? Bass beat what you mean with that? Bass in music directly? EQ, Bass Boost everything is off at my side. But lets wait for a new driver version
post edited by The_Professor - 2019/09/13 07:58:35
|
ViperSP
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2018/12/28 13:12:35
- Location: Scotland
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/13 13:59:38
(permalink)
Hi, does the same with older driver so i done a complete uninstall of everything to do with Nu Audio AKA drivers and software then used CCleaner to get rid of registry entries, rebooted, used CCleaner again it found more Nu Audio software. Cleaned that and rebooted.
Downloaded the most up to date Nu Audio 2.0.7 and installed and there is still crackling on bass sound output. I adjusted the volume of the Nu Audio program to 70% to stop the crackle and turn up my surround to compansate.
|
viki80
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2019/07/18 00:28:48
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/13 19:09:25
(permalink)
I had the same cracking sound too even without changing the volume. Last week i bought gigabyte nvme gen4 and reinstall win10 and install the latest driver and finally the cracking is gone. Looks like ccleaner didnt completely remove the old driver.
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/14 02:34:15
(permalink)
I Never used an old driver, as i said before i got the Creative ZxR and than the Nu Audio directly with the newest driver
Maybe a problem with some windows stuff? When you reinstall and problems are gone
|
viki80
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2019/07/18 00:28:48
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/15 23:33:01
(permalink)
U r using intel cpu, should try older driver. They are stable with my i5 8500.
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/16 07:17:00
(permalink)
So with older versions you dont have any problem? Which version you use?
|
viki80
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2019/07/18 00:28:48
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/16 08:59:08
(permalink)
Driver 02.04 works fine with my i5. Give it a try.
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/16 09:22:00
(permalink)
0.2.0.4 still the same crackle. Is this maybe caused by the firmware? Which you have? I got 0.2B viki80
I had the same cracking sound too even without changing the volume. Last week i bought gigabyte nvme gen4 and reinstall win10 and install the latest driver and finally the cracking is gone. Looks like ccleaner didnt completely remove the old driver.
So my Windows was really old, i reinstall it. But still the same  thinks that must be the firmware. Two cards same problem, also other user. Think everyone gets the new Firmware
post edited by The_Professor - 2019/09/16 12:50:43
|
viki80
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2019/07/18 00:28:48
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/17 09:03:23
(permalink)
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/09/17 12:04:19
(permalink)
Got the same Firmware. But Crackle still there, also with new Windows. So i have to wait for a solution from EVGA, exchange the card again, im sure wont help.
post edited by The_Professor - 2019/09/18 06:24:00
|
wsxmi
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2019/10/18 04:21:39
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/10/18 04:23:00
(permalink)
I have same issue.i9 9900,z390, 2.0.7 driver.
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: Small crackle during Volume change
2019/10/18 14:54:37
(permalink)
The next driver will correct this issue.
|
erikpienk
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2017/11/21 22:01:11
- Status: offline
- Ribbons : 0
Re: Small crackle during Volume change
2019/10/19 01:21:32
(permalink)
EVGATech_LeeM
The next driver will correct this issue.
Do we have a ETA for that release? I got my card today and I thought my headphones where the problem (Senn. gsp500). What i found out is that when lower freq. channels are high they start cracking the sound at specific volume ranges. for me ~70-92, even with headphone volume change. So theres is a problem with strong base and master volume as specific ranges.
|