j3zzr
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2014/02/14 16:43:32
- Status: offline
- Ribbons : 1
It saves everything except the power target. I set it to 110% or 120% and it works until i reboot or close and reopen the X1 app. Because it resets to 91% and not 100% all games make my GPU throttle. I dont want it to be 91%, nor 100%. I want it to stay to the number i apply and save :) I am using the latest PX1 and latest Nvidia drivers. What is this? -------------------- Edit by Cool GTX: Update Post with info found in later post The GPU i use is an ASUS 1080 Ti STRIX O11G OS is 1903 Nvidia driver is 431.60
post edited by Cool GTX - 2019/07/30 11:21:19
Attached Image(s) 
|
j3zzr
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2014/02/14 16:43:32
- Status: offline
- Ribbons : 1
Re: Precision X1 sets power target to 91% every time.
2019/07/30 03:47:49
(permalink)
No one? Tried XOC and that one works, just like Asus Tweak GPU (which i was using lately before trying PX again after some time) So its only when using PX1. Kinda weird the now unsupported app does work but the new supported app does not.
post edited by radjezz - 2019/07/30 04:21:46
|
bdary
Omnipotent Enthusiast
- Total Posts : 10330
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida
- Status: offline
- Ribbons : 116
Re: Precision X1 sets power target to 91% every time.
2019/07/30 06:03:50
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 sets power target to 91% every time.
2019/07/30 06:31:24
(permalink)
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: Precision X1 sets power target to 91% every time.
2019/07/30 07:08:59
(permalink)
Have you selected a "Profile Number to Save to ? 0-9
Do any of your other settings Save ?
|
j3zzr
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2014/02/14 16:43:32
- Status: offline
- Ribbons : 1
Re: Precision X1 sets power target to 91% every time.
2019/07/30 10:49:15
(permalink)
I tried all that with no result unfortunatly.
All other settings do save and work after a reboot or after closing and re-opening the app.
It's just that the power setting is, for some reason, put on 91% ...
So my core is still +74, my mem is still +100 but my power limit is set to 91% every time..
When i set everything to default, there is no issue. After rebooting everything is still default and power limit is till 100%, only when i make custom changes to the power limit it reverts to 91% after every reboot or restart of the app. How weird is that, what is up with the 91%.
The issue does not seem to be that it does not save the settings but that something within the program decides to reduce it to 91% every time.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 sets power target to 91% every time.
2019/07/30 10:55:18
(permalink)
radjezz
I tried all that with no result unfortunatly.
All other settings do save and work after a reboot or after closing and re-opening the app.
It's just that the power setting is, for some reason, put on 91% ...
So my core is still +74, my mem is still +100 but my power limit is set to 91% every time..
When i set everything to default, there is no issue. After rebooting everything is still default and power limit is till 100%, only when i make custom changes to the power limit it reverts to 91% after every reboot or restart of the app. How weird is that, what is up with the 91%.
The issue does not seem to be that it does not save the settings but that something within the program decides to reduce it to 91% every time.
You have done this as well? PX1 Clean Up https://forums.evga.com/FindPost/2947719 & https://forums.evga.com/FindPost/2947737What is the Make and Model Number of this Graphics Card? Under What OS to include Service Packs or 1803/1809 or 1903?
post edited by bcavnaugh - 2019/07/30 10:58:24
|
j3zzr
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2014/02/14 16:43:32
- Status: offline
- Ribbons : 1
Re: Precision X1 sets power target to 91% every time.
2019/07/30 11:15:31
(permalink)
The clean up i didn't do, it was a clean install of PX1 tho. It wasn't installed on my system before.
The GPU i use is an ASUS 1080 Ti STRIX O11G
OS is 1903
Nvidia driver is 431.60
I will try the clean up thing when i can, i do have it working now with XOC tho.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: Precision X1 sets power target to 91% every time.
2019/07/30 11:22:14
(permalink)
radjezz
The clean up i didn't do, it was a clean install of PX1 tho. It wasn't installed on my system before.
The GPU i use is an ASUS 1080 Ti STRIX O11G
OS is 1903
Nvidia driver is 431.60
I will try the clean up thing when i can, i do have it working now with XOC tho.
I updated you 1st post Does Asus have their own OC tool ?
|
j3zzr
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2014/02/14 16:43:32
- Status: offline
- Ribbons : 1
Re: Precision X1 sets power target to 91% every time.
2019/07/30 11:34:05
(permalink)
Yeah TweakGPU, its decent.
It's what i was using but wanted to try precision X again as it's what i used in the past and always liked.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Precision X1 sets power target to 91% every time.
2019/07/30 11:41:31
(permalink)
Do you have the same issue with msi afterburner?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Precision X1 sets power target to 91% every time.
2019/07/30 11:47:25
(permalink)
radjezz
The clean up i didn't do, it was a clean install of PX1 tho. It wasn't installed on my system before.
The GPU i use is an ASUS 1080 Ti STRIX O11G
OS is 1903
Nvidia driver is 431.60
I will try the clean up thing when i can, i do have it working now with XOC tho.
Not all Features will work on a Non-EVGA Graphics Card. With a GTX Card I would recommend PXOC Version 6.2.7 Release: 5/8/2018 - Fixed Power and Memory fan increased fanspeeds when starting Precision XOC or switching skins.
- Fixed GPU fan not allowing software fan curve when starting Precision XOC or switching skins.
- Improvements to EVGA Z10 keyboard compatibility.
- Fan curve improvements.
- Various bug fixes and GUI improvements.
Download Links Download Standalone Version
|