I wonder if this version has a new Firmware for the KPE Hydro Copper Water Block to set the LED Logo? YES

bdary

bcavnaugh
All working well with this Version, Saving Profiles Settings and even the new Turn Off Splash Screen Setting

Good to hear.  Might have to give this software another try...

Or Wait for the newer Boost-Lock Version, I am for my KPE Card.

This new version fails to show framerate . Deleted it and went back to afterburner. At least that one works with on screen display

bdary

bcavnaugh

bdary

bcavnaugh
All working well with this Version, Saving Profiles Settings and even the new Turn Off Splash Screen Setting

Good to hear.  Might have to give this software another try...

Or Wait for the newer Boost-Lock Version, I am for my KPE Card.

I didn't see this post until after I had installed X1.  But I will install this newer version you mention once released.  From my perspective, this current latest version is the best software EVGA has made since they parted ways with Unwinder.  Everything seems to work properly.  I didn't have to use a single workaround to get something to function.  If I was to have something to complain about, it's that it won't remember it's last location on the screen after a reboot.  I can live with that...
 
Great job EVGA & team...

bcavnaugh
All working well with this Version, Saving Profiles Settings and even the new Turn Off Splash Screen Setting

+1.  I've been using this for a few days now and no issue's at all.  Just installed it, changed a few settings, set up a fan curve, and created a couple profiles, all is good...
 
On top of that, no workarounds or gimmicks to make things work.  For a long time I'd try Precision out for a day or so and always go back to AB.  Maybe now I can use X1 all the time.  I'm not uninstalling AB just yet, but I'm more optimistic now...

Well, I came across an issue this morning.  When I resume my system from sleep, somehow the graphics driver gets corrupted is the best way I can describe it.  What happens is I launch a game and my core clock won't boost to where it usually would be, not even to advertised speeds.  The FPS also get capped to 60FPS somehow.
 
The only way I've found to resolve this is reinstalling the graphics driver.  Maybe there's an easier way, but I haven't found it yet.  After I reinstall the driver, load that same game and all is back to normal.  This issue only happens with PX1 running at the time of putting the system to sleep, then waking it up after a period of time.

I'm currently using xoc 6.2.7 for my 1080 ti ftw3 and had to uninstall it because it kept crashing. Does this version support the 3 fans that the 1080 ti ftw has? and how about led control?

BenyaminJ
I'm currently using xoc 6.2.7 for my 1080 ti ftw3 and had to uninstall it because it kept crashing. Does this version support the 3 fans that the 1080 ti ftw has? and how about led control?

Yes, But I still use PXOC 6.2.7 on all my GTX Graphics Cards and only use PX1 only on my RTX Cards.

This boost lock is intriguing. So, I’m used to seeing the core clock decline gradually as the temperature increases. I hardly ever see 45C with load and the core clock decreases from 2190 to 2170 then to 2160. Boost lock will therefore keep the core clock at 2190 regardless of the temperature?

Hopper64
Boost lock will therefore keep the core clock at 2190 regardless of the temperature?

Nope. It will act just like msi afterburners lock feature.

Hopper64

Sajin

Hopper64
Boost lock will therefore keep the core clock at 2190 regardless of the temperature?

Nope. It will act just like msi afterburners lock feature.

I'm not familiar with this feature. What do you mean? Thanks.

https://forums.evga.com/FindPost/2897251

Thanks Sajin. Appreciate the help.

 

bcavnaugh
Nice change for the KPE Graphics Card. The new Firmware for the KPE is now 2B.FA.3F
You can now edit the LED Settings, also if you turn off the Logo LED it also turns off the 5 Bright LED shown on the Right.
While you can Dim the Logo LED you cannot Dim the 5 LEDs shown on the Right.

I cannot wait for the next version that will have Boost-Lock....

Is 2b.fa.3f only for hydro copper? I haven't got mine installed yet but it's still on 2b.fa.39


 

bcavnaugh

tresnugget

bcavnaugh
Nice change for the KPE Graphics Card. The new Firmware for the KPE is now 2B.FA.3F
You can now edit the LED Settings, also if you turn off the Logo LED it also turns off the 5 Bright LED shown on the Right.
While you can Dim the Logo LED you cannot Dim the 5 LEDs shown on the Right.

I cannot wait for the next version that will have Boost-Lock....

Is 2b.fa.3f only for hydro copper? I haven't got mine installed yet but it's still on 2b.fa.39

I would say in general the KPE Card with Hybrid or HC installed.

I appreciate it. I saw where Tin added it into the guide. When flashing I also noticed there's a newer firmware in the firmware folder. E200_FA41_20190617.hex I emailed EVGA support and asked them about it.

Dipperino
could there be a bug on starting with windows? i havent had it start with windows once since i installed latest version about a week now, app started automatically with windows on all previous versions, using since i got my rtx 2080 ti black card, few months now.
 
i have turned off the setting, clicked apply then saved. restarted the app, checked off 'start with OS' and clicked apply then save, maybe it could help fix it?

Welcome to the Forum
Check to see what is in Task Scheduler after you gave turned it off in PX1 then Click Apply.
Restart the PC and check to make sure there are no PX1 items in Task Scheduler.
Then start PX1 and change to Start with OS and the Click Apply Exit PX1 and restart the Computer.
You may need to Right Click on PX1 and Select Run as administrator to complete the above.