ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
I have the following: CoolingAlphacool NexXxoS ST45 X-Flow 360mm in push-pull Alphacool NexXxoS ST30 240mm in pull 8 Noctua NF-A12x25 PWM 1 Phanteks PH-F140MP intake EK-Velocity - Copper + Plexi EVGA Hydro Copper Aquacomputer D5 Next Watercool HEATKILLER Tube 100 ComputerEvga Z390 FTW Evga SuperNOVA 1200 P2 Intel 9900k - 5.2GHz - 1.26v G-Skill 32GB - 3200MHz - F4-3200C16-8GVKB Evga RTX 2080 ti FTW3 Samsung 960 Pro m.2 512GB Samsung 860 500GB Samsung 860 1TB Phantek Evolv X Case When under load gaming "Elite Dangerous" after 2 hours or so fans at 100% water temps are 25 oC ~ 26 oC CPU and GPU are 33 oC~ 35 oC. At idle fans 40% water is 21 oC ~ 22 oC CPU and GPU are 22 oC ~ 23 oC. Ambient air temperature is 20.5 oC. Is this about the best I can expect? Are those good numbers? Thanks in advance. Edit Changed Title
post edited by ehupp01 - 2019/05/18 16:43:09
Attached Image(s)
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
notfordman
Omnipotent Enthusiast
- Total Posts : 10345
- Reward points : 0
- Joined: 2007/08/09 23:52:23
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: Is my loop good?
2019/04/10 17:59:10
(permalink)
|
Delirious
EVGA Forum Moderator
- Total Posts : 17474
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: Is my loop good?
2019/04/10 18:14:45
(permalink)
those are great. good to go
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: Is my loop good?
2019/04/10 18:36:34
(permalink)
As this is the wrong section for this, going to move thread to the Cooling section.
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/04/10 18:56:32
(permalink)
Thanks! Its my first attempt a a custom loop. I even modded the case for more airflow. Even at 100% those fans are really quite.
Attached Image(s)
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
notfordman
Omnipotent Enthusiast
- Total Posts : 10345
- Reward points : 0
- Joined: 2007/08/09 23:52:23
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: Is my loop good?
2019/04/10 19:57:06
(permalink)
|
jfw06013
SSC Member
- Total Posts : 586
- Reward points : 0
- Joined: 2017/02/14 10:26:10
- Status: offline
- Ribbons : 4
Re: Is my loop good?
2019/04/10 21:29:08
(permalink)
Those Klipsch speakers are kick butt speakers.
|
Ghost13
Superclocked Member
- Total Posts : 214
- Reward points : 0
- Joined: 2019/03/29 21:38:21
- Status: offline
- Ribbons : 0
Re: Is my loop good?
2019/04/10 22:38:51
(permalink)
looks fair good to me .. kinda like my build, im still not done with yet ..
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/04/11 05:14:32
(permalink)
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31004
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Is my loop good?
2019/04/11 06:17:37
(permalink)
Moving to Mods Rigs section of Forums which I think that is a Better fit for this Thread, as OP is showcasing their Rig BR awarded
|
BennyM
EVGA Alumni
- Total Posts : 78
- Reward points : 0
- Joined: 2018/05/23 12:05:10
- Status: offline
- Ribbons : 2
Re: Is my loop good?
2019/04/11 06:27:33
(permalink)
Nice setup all the way around
|
ThomasN
EVGA Alumni
- Total Posts : 17
- Reward points : 0
- Joined: 2016/10/17 08:00:58
- Status: offline
- Ribbons : 0
Re: Is my loop good?
2019/04/12 12:58:21
(permalink)
What I'd give for those tempssss
|
JacobB
SSC Member
- Total Posts : 522
- Reward points : 0
- Joined: 2018/01/15 17:45:23
- Location: Brea, CA
- Status: offline
- Ribbons : 3
Re: Is my loop good?
2019/04/12 13:13:18
(permalink)
If you don't mind me asking, what are the spacers that you have on 5 of the 6 fans? -Jacob B.
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/04/12 15:10:17
(permalink)
EVGATech_JacobB If you don't mind me asking, what are the spacers that you have on 5 of the 6 fans?
They are 3d printed shrouds I picked up from shapeways. I could not fit the third one due to space above my reservoir. They are very tapered on the inside.
Attached Image(s)
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
JacobB
SSC Member
- Total Posts : 522
- Reward points : 0
- Joined: 2018/01/15 17:45:23
- Location: Brea, CA
- Status: offline
- Ribbons : 3
Re: Is my loop good?
2019/04/12 15:17:40
(permalink)
ehupp01
EVGATech_JacobB If you don't mind me asking, what are the spacers that you have on 5 of the 6 fans?
They are 3d printed shrouds I picked up from shapeways. I could not fit the third one due to space above my reservoir. They are very tapered on the inside.
What are these intended to do? Is this to help cooling? I've not seen these before. -Jacob B.
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/04/12 16:36:46
(permalink)
The help give the fan center motor hub a little more space from the fins of the radiator. In doing so the fan uses the full radiator fin area. So in theory they make everything more efficient. ¯\_(ツ)_/¯ I bought the logic but don't have any idea if they do anything. LOL YMMV
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/04/14 16:40:04
(permalink)
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
JacobB
SSC Member
- Total Posts : 522
- Reward points : 0
- Joined: 2018/01/15 17:45:23
- Location: Brea, CA
- Status: offline
- Ribbons : 3
Re: Is my loop good?
2019/04/15 11:18:47
(permalink)
ehupp01 The help give the fan center motor hub a little more space from the fins of the radiator. In doing so the fan uses the full radiator fin area. So in theory they make everything more efficient. ¯\_(ツ)_/¯ I bought the logic but don't have any idea if they do anything. LOL YMMV
That's what I assumed, but I just wanted to confirm that. I might look into this. :) Thank you! -Jacob B.
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/05/18 14:29:21
(permalink)
Got rid of the clear tube and went all black.
Attached Image(s)
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
Gold Leader
CLASSIFIED Member
- Total Posts : 3939
- Reward points : 0
- Joined: 2009/05/30 03:06:17
- Location: Dirksland, The Netherlands
- Status: offline
- Ribbons : 62
Re: Is my loop good?
2019/05/28 08:25:56
(permalink)
Nice build, here yet I would of gone for an AMD Threadripper 2950X or just waited for the new Ryzen 3000 series, they have more cores, better IPC and much better for flight sims in the end. Flight Sims prefer more cores than just a few more Ghz, which is why I use Dual 12 Core Opterons for such purposes. Plus the TR 2950X is a much better CPU for more headroom for that RTX 2080 Ti as well, or the newer Ryzen 9 3000 series likewise. Other than that nice build tho :) If you want em to add your system to the EVGA MODS RIGS List, make a post in this thread: https://forums.evga.com/FindPost/1588237
|
jollydet
Superclocked Member
- Total Posts : 164
- Reward points : 0
- Joined: 2014/02/02 23:58:12
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/05/29 05:25:05
(permalink)
Black tubing looks sweet Gold Leader Nice build, here yet I would of gone for an AMD Threadripper 2950X or just waited for the new Ryzen 3000 series, they have more cores, better IPC and much better for flight sims in the end. Flight Sims prefer more cores than just a few more Ghz, which is why I use Dual 12 Core Opterons for such purposes.
Plus the TR 2950X is a much better CPU for more headroom for that RTX 2080 Ti as well, or the newer Ryzen 9 3000 series likewise. Other than that nice build tho :) If you want em to add your system to the EVGA MODS RIGS List, make a post in this thread: https://forums.evga.com/FindPost/1588237
Xplane, fsx and p3d prefer raw core speed and are not heavily threaded. 3000 series processors are not available to consumers nor is there any performance metrics in flight sims, 9900k has better ipc than a 2950x..
post edited by jollydet - 2019/05/29 05:41:42
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/05/29 08:43:13
(permalink)
jollydet Black tubing looks sweet Xplane, fsx and p3d prefer raw core speed and are not heavily threaded. 3000 series processors are not available to consumers nor is there any performance metrics in flight sims, 9900k has better ipc than a 2950x..
That has been my experience as well. More single core performance the better.
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Is my loop good?
2019/06/03 07:33:47
(permalink)
ehupp01 Got rid of the clear tube and went all black.
Nice, if you remove rubber from Noctua fans on bottom, anyway you don't need them, they will look even better. Noctua presented black NF-A12x25 PWM. But I'm not completely happy with look. They shouldn't paint metal part in middle and much better would be Dark Grey-Light Grey combo. To bad because they didn't take a look how NF-A12x25 PWM look in Redux color scheme I think they would build them rather then full black. During 2019 I will switch to Heatkiller 100 D5 and maybe even D5 Next as your. Look fantastic, only I need to see how to mount them best. Do you have more pictures. How you mount Heatkiller D5 100??? Is it possible that D5 Next hold whole reservoir? Black fittings are nice as well, but chrome-nickel-silver looked me more useful to throw them in hot water full of chemicals and clean them with tooth brush after some time of use. I afraid some of Black fittings will scratch easier?
post edited by Vlada011 - 2019/06/03 07:40:44
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/06/03 08:03:47
(permalink)
Yes I wish the fans were in the black or gray color that is what I wanted but the performance of the fans is phenomenal so I just deal with the ugly color LOL. The Heatkiller is mounted to the back of the case with 2 screws and the D5 next is also mounted with another 2 screws. The pump mount could not hold the pump and reservoir on its own.
Attached Image(s)
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: Is my loop good?
2019/06/03 13:03:16
(permalink)
I have NF-A12x25 PWM as well. Yes performance are so good that color don't bother me at all. To be honest I would not change mine for black version. Here is black version... I will not change mine for this or even buy three new black because I need 3 more, I have 3. They are made from some other material and that can't look black clean completely as fans near.
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/09/05 12:08:11
(permalink)
I added a second pump and flow sensor, also updated my aquasuite overview that sits at the top of my monitor.
post edited by ehupp01 - 2019/09/05 12:37:27
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|
knightsilver
Omnipotent Enthusiast
- Total Posts : 9430
- Reward points : 0
- Joined: 2008/11/21 13:42:06
- Location: Nebraska
- Status: offline
- Ribbons : 14
Re: Is my loop good?
2019/09/10 15:04:17
(permalink)
Too bad we dont have am awesome space-combat game to do ur system justice... Thrustmaster controls?
|
ehupp01
New Member
- Total Posts : 85
- Reward points : 0
- Joined: 2006/06/28 17:28:45
- Status: offline
- Ribbons : 1
Re: Is my loop good?
2019/09/10 15:55:40
(permalink)
Yes Thrustmaster HOTAS and Saitek pedals. Combat in Elite Dangerous is pretty fun in VR . That has what I have been doing lately trying to achieve Elite. Going to take a while though. DCS and Elite are about all I do on it for fun.
Asus ROG Strix Z790, Custom Loop, Evga SuperNOVA 1200 P2, Intel 13900KS - 6GHz, G-Skill 32GB - 7600MHz - F5-7600J3646G16GX2-TZ5RK Asus RTX OC 4090, Samsung 980 Pro m.2 1TB, Samsung 980 Pro m.2 2TB, Samsung 860 2TB, 2 Samsung 860 1TB, Custom Phantek Evolv X
|