zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
I just installed the hybrid kit on my 2080ti XC Ultra and I don't think the pump is working. Idles at 40 degC and shoots up to 90 almost instantly under heavy load. The VRM fan is working, the shroud RGB is working, but the I can't feel any vibration on the water lines or pump, and the radiator fan doesn't move. I can see fan 2 being commanded in XOC but 0 RPM speed feedback. I checked all the connectors several times, reseated the pump even. Is there any way to troubleshoot this more? I tried measuring the rad fan supply connector and if it uses standard fan pinout I don't see 12V across pin 2 to 1.
Everything worked ok before install, max load temp was about 70, or less. Been folding for months no issues with the card.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 11:42:26
(permalink)
Is the Radiator Cold or Hot when Folding? But you also need to use PX1 and not POC to manage the Radiator and VRM Fans This is also not a GPU fan so you need to look more at the VRM Fan Speed. You have no GPU Fan so you should not really see voltage from what another Forum Member Posted. Also you should get an update when you Install PX1 and I would recommend Version 0.3.11 BETA Release: 12/26/2018 - Improved GeForce GTX 10 Series support
- Improved support for EVGA HYBRID cards
- Fix profile crash issue
- OC Scanner Improvements
- Adds support for Traditional / Simplified Chinese language
Download Links Download Standalone Version
post edited by bcavnaugh - 2019/03/24 11:51:14
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 11:48:36
(permalink)
Sorry I do use Precision X1 program, was writing from phone
Doesn't get hot at all, but I don't want to try for more than a few minutes if its getting over 90.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 11:49:23
(permalink)
zippoking
Sorry I do use Precision X1 program, was writing from phone
Doesn't get hot at all, but I don't want to try for more than a few minutes if its getting over 90.
What is the Pump showing in PX1?
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 11:59:55
(permalink)
And I'm running v3.12, I also reinstalled it after this install. Is there a setting to enable pump, I don't see a pump status on the screen?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 12:11:31
(permalink)
zippoking
And I'm running v3.12, I also reinstalled it after this install. Is there a setting to enable pump, I don't see a pump status on the screen?
No not that I know of, I was hoping that it would at least show the RPM or Flow Rate. Did the MCU update after you changed and installed the Hybrid Cooler. Mine did after I installed the Hydro Copper Water Block. I would recheck the Cables and make sure they are connected to the Correct Connectors on the PCB.
post edited by bcavnaugh - 2019/03/24 12:14:58
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 12:17:52
(permalink)
I didn't see anything, how can I tell?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 12:25:27
(permalink)
zippoking
I didn't see anything, how can I tell?
If you have PX1 Starting with the OS then Exit wait a minute and then start it back and look at all the Tabs Menu items. We know we cannot Control the Pump but maybe see the RPM of it, I have issues with PX1 if I have it start with the OS. I would review Page 2 https://www.evga.com/support/manuals/files/400-HY-1384-B1.pdf for the Connectors.
post edited by bcavnaugh - 2019/03/24 12:31:37
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 12:44:38
(permalink)
I'm not quite sure this update occurred, I don't see a pump icon anywhere in X1, does that mean I didn't get this? Tried restarting and exiting but don't see anything.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 12:51:45
(permalink)
Have you Powered Off and Tuned Off the Power Supply?
But set PX1 to Not Start with the OS.
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 12:59:27
(permalink)
I set it to not start with OS, powered down, turned off power supply few 15s, started back up and manually started X1. Looks the same to me
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 13:07:59
(permalink)
You never got and MCU or Firmware update Notice after you installed the Hybrid Kit?
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 13:13:14
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 13:22:40
(permalink)
zippoking
No not that I saw
Have you rechecked all the Connections? Also what is PX1 Showing for your Graphics Card?2080 Ti XC Ultra or 2080 Ti XC Ultra Hybrid?
post edited by bcavnaugh - 2019/03/24 14:15:10
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 13:26:18
(permalink)
Yes I've taken them all out and reconnected many times
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 13:28:11
(permalink)
zippoking
Yes I've taken them all out and reconnected many times
Also what is PX1 Showing for your Graphics Card? 2080 Ti XC Ultra or 2080 Ti XC Ultra Hybrid? Anyway to post a photo without the Shroud Installed? If all else you can request an RMA, you can start an Service Ticket on your Kit but you need to complete Product Registration and even compete Invoice Upload
post edited by bcavnaugh - 2019/03/24 13:32:04
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 13:34:22
(permalink)
It still says XC ultra, should that update, or can I manually update it somehow?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/24 14:11:31
(permalink)
I just re-checked mine and they did not change as well. Best to put back on the Stock Cooler and RMA your Kit.
post edited by bcavnaugh - 2019/03/24 14:14:45
|
zippoking
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2011/01/14 11:44:31
- Location: West of a white house, in an open field
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/30 09:17:02
(permalink)
FWIW, did cross ship RMA and tried replacement parts, turned out to be the VRM heatsink, which I didn't suspect since the onboard fan there worked. Maybe loose wire or connector somewhere that's hard to see. Working now with a 20 degC drop in temps so all is well.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/30 14:02:20
(permalink)
zippoking
Working now with a 20 degC drop in temps so all is well.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2019/03/30 18:41:10
(permalink)
zippoking
FWIW, did cross ship RMA and tried replacement parts, turned out to be the VRM heatsink, which I didn't suspect since the onboard fan there worked. Maybe loose wire or connector somewhere that's hard to see. Working now with a 20 degC drop in temps so all is well.
Glad to hear it all worked out.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Ajmi982
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2018/12/18 16:32:52
- Status: offline
- Ribbons : 0
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2020/05/28 15:15:07
(permalink)
so i have a 2080TI FE that i installed the EVGA 2080TI Hybrid Kit on and flashed the EVGA 2080 TI XC Hybrid bios. The second fan (Rad fan) refuses to show RPM and will only run at 100% no matter where i put the slider. Please help.
Attached Image(s)
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: Hybrid kit install pump/rad fan appear not working 2080ti
2020/05/28 15:33:22
(permalink)
Ajmi982
so i have a 2080TI FE that i installed the EVGA 2080TI Hybrid Kit on and flashed the EVGA 2080 TI XC Hybrid bios.
The second fan (Rad fan) refuses to show RPM and will only run at 100% no matter where i put the slider.
Please help.
Sorry for the delay .. released your post from filter
|