d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Hey gang, Going to start stress testing my new i9 9900k a little , mainly to check on core temps. I am using Prime 95, is Blend the best test - or small FFT's? Curious which you guys might be using?
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Delirious
EVGA Forum Moderator
- Total Posts : 17466
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 09:37:31
(permalink)
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 09:52:32
(permalink)
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
mattman657
iCX Member
- Total Posts : 274
- Reward points : 0
- Joined: 2013/05/07 16:50:27
- Status: offline
- Ribbons : 1
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 10:01:12
(permalink)
I used Prime95 Blend without AVX. Gets the job done.
EVGA Z390 Dark | Intel i9900k 5.2 GHz | 2 x EVGA 2080Ti FTW3 Ultra | G.Skill TridentZ 4,133MHz | Samsung 970 Pro & Evo, 850 Evo Lian PC-V3000 | EK Res & Dual D5 Pump | 3 x Alphacool UT60 | Noctua & Akasa Fans | Asus PG279Q
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 10:08:19
(permalink)
Ran the Intel stress test for 5 minutes, cores barely broke 60c,, mostly in the low to mid 50's so sounds like my cooling is probably ok. Will do more in depth testing later, just wanted to check my core temps at a decent load and make sure they were looking ok.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 10:47:34
(permalink)
I use IntelBurnTest 2.54 Link and also AIDA64 Extreme
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 10:59:44
(permalink)
bcavnaugh I use IntelBurnTest 2.54 Link and also AIDA64 Extreme
Thanks will check out the IntelBurnTest . I have a license for AIDA64 Extreme just have not got around to installing it yet.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 11:31:59
(permalink)
bcavnaugh I use IntelBurnTest 2.54 Link and also AIDA64 Extreme
Goodness, there are several benchmark options listed in AIDA64 Extreme - which do you run? Also another question - when monitoring CPU temps, what is Package Temp referring to?
post edited by d.burnette - 2019/01/18 11:45:22
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bdary
Omnipotent Enthusiast
- Total Posts : 10310
- Reward points : 0
- Joined: 2008/04/25 14:08:16
- Location: Florida
- Status: offline
- Ribbons : 116
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 12:06:20
(permalink)
d.burnette
bcavnaugh I use IntelBurnTest 2.54 Link and also AIDA64 Extreme
Goodness, there are several benchmark options listed in AIDA64 Extreme - which do you run? Also another question - when monitoring CPU temps, what is Package Temp referring to?
If you use the "System Stability" test you can select which tests you want. There are 6 tests to choose from. Select all or any of them you want to stress test...
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 12:16:06
(permalink)
bdary
d.burnette
bcavnaugh I use IntelBurnTest 2.54 Link and also AIDA64 Extreme
Goodness, there are several benchmark options listed in AIDA64 Extreme - which do you run? Also another question - when monitoring CPU temps, what is Package Temp referring to?
If you use the "System Stability" test you can select which tests you want. There are 6 tests to choose from. Select all or any of them you want to stress test...
I Start with High and end with Maximum changing the number of runs. l so I start with High (10) at 2048 then Very High (10) 4096 then Custom (6) 8192 then Maximum (4) Times to run () Keep an eye on your CPU Temps.
post edited by bcavnaugh - 2019/01/18 12:19:00
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 12:18:44
(permalink)
Ok much thanks guys, will have a look at the system stability tests.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
tatm mrk. RIVE
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2013/10/04 13:33:25
- Location: PHX
- Status: offline
- Ribbons : 0
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 12:31:44
(permalink)
Rog realbench with as much memory as u have, used. P95 is too hot. Xtu is too cool unless you run the benchmark. The benchmark is accurate representation of temps, stress test is way low temp. Its descent stress test tho. Rog realbench could run for hours for me without getting dumb high, small fft p95 gets into the 90s and everything else maxes out at 85ish.
So what i mean is at 5.1ghz Xtu is like 65 max P95 is 96max Realbench is 86c max
Realbench is more aligned with what you would run into. Then i run geekbench3 (modded to run 64bit for free)(hangs before i get to raytracing test if its not quite stable) Or cinebench r15. Usually whatever passes cinebench or geek3 is stable for quite a while.
R15 has been hardest for me.
9900k- dark z390- GTX 1080TI poseidon- 16gb 4800 royal 7820x- RVIE - 64gb g.skill b-die -rtx 2080ti FTW3
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 12:37:05
(permalink)
bcavnaugh
bdary
d.burnette
bcavnaugh I use IntelBurnTest 2.54 Link and also AIDA64 Extreme
Goodness, there are several benchmark options listed in AIDA64 Extreme - which do you run? Also another question - when monitoring CPU temps, what is Package Temp referring to?
If you use the "System Stability" test you can select which tests you want. There are 6 tests to choose from. Select all or any of them you want to stress test...
I Start with High and end with Maximum changing the number of runs. l so I start with High (10) at 2048 then Very High (10) 4096 then Custom (6) 8192 then Maximum (4) Times to run () Keep an eye on your CPU Temps.
Well I ran the CPU stress test for 10 min, hottest it got was 65c. However I forgot to go in and set my case fans higher, they were running at 50%. Not sure where you are getting those number from ( 2048 4096 and then custom)?
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 12:52:27
(permalink)
d.burnette
bcavnaugh
bdary
d.burnette
bcavnaugh I use IntelBurnTest 2.54 Link and also AIDA64 Extreme
Goodness, there are several benchmark options listed in AIDA64 Extreme - which do you run? Also another question - when monitoring CPU temps, what is Package Temp referring to?
If you use the "System Stability" test you can select which tests you want. There are 6 tests to choose from. Select all or any of them you want to stress test...
I Start with High and end with Maximum changing the number of runs. l so I start with High (10) at 2048 then Very High (10) 4096 then Custom (6) 8192 then Maximum (4) Times to run () Keep an eye on your CPU Temps.
Well I ran the CPU stress test for 10 min, hottest it got was 65c. However I forgot to go in and set my case fans higher, they were running at 50%. Not sure where you are getting those number from ( 2048 4096 and then custom)?
Attached Image(s)
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 13:00:46
(permalink)
Ohh I was looking at AIDA 64 Extreme ( got it installed) LOL. Will take a look at IntelBurnTest.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 13:15:16
(permalink)
Ok so IntelBurnTest - set to High and run 10 times, checked out fine. Temps for the most part were in the mid 60's, topping out around 70. So what is the CPU temp that folks with these i9 processors try to not go over?
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30908
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 14:09:13
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/18 14:11:45
(permalink)
Needs an update to fully support RS5 or 1809 that is. But also needs an update to support the new Intel CPUs. Not saying it will not work. https://downloadmirror.intel.com/24075/eng/XTU-6_4-MR-ReleaseNotes.pdfSupported Operating Systems – 1. Windows 7 2. Windows 10 RS1 3. Windows 10 RS2 4. Windows 10 RS3 5. Windows 10 RS4 This download is valid for the product(s) listed below.- Intel® Core™ i3-7350K Processor (4M Cache, 4.20 GHz)
- Intel® Core™ i3-8350K Processor (8M Cache, 4.00 GHz)
- Intel® Core™ i5-4670K Processor (6M Cache, up to 3.80 GHz)
- Intel® Core™ i5-4690K Processor (6M Cache, up to 3.90 GHz)
- Intel® Core™ i5-6600K Processor (6M Cache, up to 3.90 GHz)
- Intel® Core™ i5-7600K Processor (6M Cache, up to 4.20 GHz)
- Intel® Core™ i5-7640X X-series Processor (6M Cache, up to 4.20 GHz)
- Intel® Core™ i5-8600K Processor (9M Cache, up to 4.30 GHz)
- Intel® Core™ i7-3920XM Processor Extreme Edition (8M Cache, up to 3.80 GHz)
- Intel® Core™ i7-3930K Processor (12M Cache, up to 3.80 GHz)
- Intel® Core™ i7-3940XM Processor Extreme Edition (8M Cache, up to 3.90 GHz)
- Intel® Core™ i7-3960X Processor Extreme Edition (15M Cache, up to 3.90 GHz)
- Intel® Core™ i7-3970X Processor Extreme Edition (15M Cache, up to 4.00 GHz)
- Intel® Core™ i7-4770K Processor (8M Cache, up to 3.90 GHz)
- Intel® Core™ i7-4790K Processor (8M Cache, up to 4.40 GHz)
- Intel® Core™ i7-4820K Processor (10M Cache, up to 3.90 GHz)
- Intel® Core™ i7-4930K Processor (12M Cache, up to 3.90 GHz)
- Intel® Core™ i7-4930MX Processor Extreme Edition (8M Cache, up to 3.90 GHz)
- Intel® Core™ i7-4940MX Processor Extreme Edition (8M Cache, up to 4.00 GHz)
- Intel® Core™ i7-4960X Processor Extreme Edition (15M Cache, up to 4.00 GHz)
- Intel® Core™ i7-5820K Processor (15M Cache, up to 3.60 GHz)
- Intel® Core™ i7-5930K Processor (15M Cache, up to 3.70 GHz)
- Intel® Core™ i7-5960X Processor Extreme Edition (20M Cache, up to 3.50 GHz)
- Intel® Core™ i7-6700K Processor (8M Cache, up to 4.20 GHz)
- Intel® Core™ i7-6800K Processor (15M Cache, up to 3.60 GHz)
- Intel® Core™ i7-6820HK Processor (8M Cache, up to 3.60 GHz)
- Intel® Core™ i7-6850K Processor (15M Cache, up to 3.80 GHz)
- Intel® Core™ i7-6900K Processor (20M Cache, up to 3.70 GHz)
- Intel® Core™ i7-6950X Processor Extreme Edition (25M Cache, up to 3.50 GHz)
- Intel® Core™ i7-7700K Processor (8M Cache, up to 4.50 GHz)
- Intel® Core™ i7-7740X X-series Processor (8M Cache, up to 4.50 GHz)
- Intel® Core™ i7-7800X X-series Processor (8.25M Cache, up to 4.00 GHz)
- Intel® Core™ i7-7820HK Processor (8M Cache, up to 3.90 GHz)
- Intel® Core™ i7-7820X X-series Processor (11M Cache, up to 4.30 GHz)
- Intel® Core™ i7-8086K Processor (12M Cache, up to 5.00 GHz)
- Intel® Core™ i7-8700K Processor (12M Cache, up to 4.70 GHz)
- Intel® Core™ i9-7900X X-series Processor (13.75M Cache, up to 4.30 GHz)
- Intel® Core™ i9-7920X X-series Processor (16.5M Cache, up to 4.30 GHz)
- Intel® Core™ i9-7940X X-series Processor (19.25M Cache, up to 4.30 GHz)
- Intel® Core™ i9-7960X X-series Processor (22M Cache, up to 4.20 GHz)
- Intel® Core™ i9-7980XE Extreme Edition Processor (24.75M Cache, up to 4.20 GHz)
- Intel® Core™ i9-8950HK Processor (12M Cache, up to 4.80 GHz)
- Intel® Extreme Tuning Utility (Intel® XTU)
post edited by bcavnaugh - 2019/01/18 14:17:03
|
satchmo0016
New Member
- Total Posts : 73
- Reward points : 0
- Joined: 2018/04/16 17:35:39
- Status: offline
- Ribbons : 0
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/19 15:42:26
(permalink)
bcavnaugh
d.burnette Ohh I was looking at AIDA 64 Extreme ( got it installed) LOL. Will take a look at IntelBurnTest.
Using AIDA 64 Extreme on all the CPU + Memory will really put you Computer to the Test
I see a lot water-cooler science in this thread and wanted to clarify some things. The way SMT works in windows will actually cause you to feel like you have better stability and temps than you actually do. Also if you want to test memory while you test your OC, that's fine but typically its better to do them separately, especially if overclocking memory. If you're running memory at stock clocks, don't waste your time testing it. VCCIA/VCCIO max 1.2V for anything under 3200MHz memory. (be careful because EVGA boards will over-volt these if you use XMP) If you want the heaviest load in AIDA, check only *one* box. Select only FPU for the hottest load on the CPU. If you select stress FPU+CPU you will see a decrease in temperatures. Try it. That might sound counter-intuitive because it seems like you're asking more of the CPU, but in reality you're asking less of each thread due to the way windows handles SMT and process swapping. Really, all you need is Prime95 and settings as follows: - Always use custom and FFT (fast Fourier transform (this is just a discrete mathematical process to do a normal FT)) "in-place". This ensures the work remains in your prescribed buffer.
- To test your cooling system (maximum heat output): custom FFT In-place min/max 8KB
- To test your OC stability/voltage: custom FFT In-place min/max 1344KB
- 10-15 min run time is typically enough to saturate a water-loop, you dont need to do more than that if searching for max temps. Literally less than 5 min if using an air cooler.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/19 15:52:23
(permalink)
Prime 95 at least on this board and a 9900k is not a good idea. Talking core temps in the 90's +. At least I was not comfortable with that on my new CPU.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Hikamiro
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2016/07/01 09:34:08
- Status: offline
- Ribbons : 0
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/20 01:37:25
(permalink)
Is anyone else having issues with adaptive setting for vcore? i'm trying to set it to 1.35 to 1.4 range, and when i test afterwards (from the stress test in UEFI) sometimes it'll hit as high as 1.5 or 1.6v which is way to high. Why is it doing this? it doesnt do this when i set to override mode
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/20 05:17:39
(permalink)
Hikamiro Is anyone else having issues with adaptive setting for vcore? i'm trying to set it to 1.35 to 1.4 range, and when i test afterwards (from the stress test in UEFI) sometimes it'll hit as high as 1.5 or 1.6v which is way to high. Why is it doing this? it doesnt do this when i set to override mode
How does the voltage do when stressing in a Windows program like Intel Extreme Tuning Utility or IntelBurnTest V2? I would view the voltage in the included Eleet program.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/20 10:21:06
(permalink)
d.burnette Prime 95 at least on this board and a 9900k is not a good idea. Talking core temps in the 90's +. At least I was not comfortable with that on my new CPU.
Is the AVX setting set to the default of 3 in the Bios or did you set it to 0? A lot of Forum Members are telling other members to set this at 0 but they do not have a Motherboard with this new setting. The X299 has two AVX settings AVX2 and AVX3 I have mine set to 2 and 3
post edited by bcavnaugh - 2019/01/20 10:23:18
|
mattman657
iCX Member
- Total Posts : 274
- Reward points : 0
- Joined: 2013/05/07 16:50:27
- Status: offline
- Ribbons : 1
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/20 10:41:51
(permalink)
The newest version of Prime has the disable checkbox but I think it still runs AVX. I was trying it but no matter what I did my frequency was dropping to what it would be when my AVX offset would kick in. Downloaded an older version of prime, edited the local.txt file to disable AVX and worked perfectly
EVGA Z390 Dark | Intel i9900k 5.2 GHz | 2 x EVGA 2080Ti FTW3 Ultra | G.Skill TridentZ 4,133MHz | Samsung 970 Pro & Evo, 850 Evo Lian PC-V3000 | EK Res & Dual D5 Pump | 3 x Alphacool UT60 | Noctua & Akasa Fans | Asus PG279Q
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Testing new i9 9900k on Z390 Dark with Prime 95?
2019/01/20 12:06:26
(permalink)
bcavnaugh
d.burnette Prime 95 at least on this board and a 9900k is not a good idea. Talking core temps in the 90's +. At least I was not comfortable with that on my new CPU.
Is the AVX setting set to the default of 3 in the Bios or did you set it to 0? A lot of Forum Members are telling other members to set this at 0 but they do not have a Motherboard with this new setting. The X299 has two AVX settings AVX2 and AVX3 I have mine set to 2 and 3
Not sure what it is defaulted to, have not got that far into the bios yet.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|