EVGA

Exploring a DG-8 build

Author
Post
Essentials Only Full Version
repo1979
FTW Member
  • Total Posts : 1116
  • Reward points : 0
  • Joined: 2017/02/21 20:37:56
  • Location: UTAH
  • Status: offline
  • Ribbons : 4
2018/12/23 10:19:49 (permalink)
I have a few things I'm not sure about so I thought I would ask here, google was not being nice lol. On the inside of the case, does any know how tall your res can be if the bottom of the d5 pump is flush with the bottom frame on the opening window door, with say a 360 45mm thick rad on the top of the case.
post edited by repo1979 - 2018/12/23 11:05:45
#1

6 Replies Related Threads
    Hoggle
    EVGA Forum Moderator
    • Total Posts : 10098
    • Reward points : 0
    • Joined: 2003/10/13 22:10:45
    • Location: Eugene, OR
    • Status: offline
    • Ribbons : 4
    Re: Exploring a DG build 2018/12/23 10:58:12 (permalink)
    Which DG case? You have a lot more room in a DG-8 line then a DG-7 because it's a full sized case and a mid-tower. Both of them don't have an opening from door but the DG-8 does have a side door and would pretty much fit any water cooling option you want.

    Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
     
     
    #2
    repo1979
    FTW Member
    • Total Posts : 1116
    • Reward points : 0
    • Joined: 2017/02/21 20:37:56
    • Location: UTAH
    • Status: offline
    • Ribbons : 4
    Re: Exploring a DG build 2018/12/23 11:04:17 (permalink)
    I will fix it, yes looking at the DG-8 series
    #3
    repo1979
    FTW Member
    • Total Posts : 1116
    • Reward points : 0
    • Joined: 2017/02/21 20:37:56
    • Location: UTAH
    • Status: offline
    • Ribbons : 4
    Re: Exploring a DG build 2018/12/24 12:02:46 (permalink)
    So today I ordered a couple things:
     
    Corsair ML pro (red) 6-120's and 5-140's
    Alphacool Eisblock XPX clear with white mounts and rgb collar 
    Bundle of new Barrow 3/8x5/8 soft tube fitting's with extra o-rings
    Ek-xres 140 pwm rgb 140 pump and res combo
    Ek-250mm tube/I wanted a taller tube
    Hardware Labs GTX 360 RADS X2
     
    #4
    repo1979
    FTW Member
    • Total Posts : 1116
    • Reward points : 0
    • Joined: 2017/02/21 20:37:56
    • Location: UTAH
    • Status: offline
    • Ribbons : 4
    Re: Exploring a DG build 2018/12/29 15:46:39 (permalink)
    Anyone else have any DG-8 series input?
    #5
    Gone Cruising
    FTW Member
    • Total Posts : 1711
    • Reward points : 0
    • Joined: 2008/02/17 23:10:31
    • Location: Clearlake Oaks, CA
    • Status: offline
    • Ribbons : 45
    Re: Exploring a DG-8 build 2018/12/29 22:41:49 (permalink)
    repo1979
    I have a few things I'm not sure about so I thought I would ask here, google was not being nice lol. On the inside of the case, does any know how tall your res can be if the bottom of the d5 pump is flush with the bottom frame on the opening window door, with say a 360 45mm thick rad on the top of the case.




    I have an AIO with push/pull at the top of my case that's taking up 75mm (25mm fan, 25mm rad, 25mm fan). From the door frame to the fan on the rad is about 350mm distance.

    Gigabyte Z390 Aorus Ultra
    Intel Core I9-9900K
    Corsair 32gb DDR4
    EVGA RTX 2070 Super
    EVGA 850W Gold
    2 x 1TB Samsung SSD
    2 x 3TB HD's in Raid 1
    Kustom Case
     
    https://www.heatware.com/u/67033/to
     

     
     
     
     
    #6
    repo1979
    FTW Member
    • Total Posts : 1116
    • Reward points : 0
    • Joined: 2017/02/21 20:37:56
    • Location: UTAH
    • Status: offline
    • Ribbons : 4
    Re: Exploring a DG-8 build 2019/01/01 17:28:39 (permalink)
    Going with a Caselabs STH10 instead. Thanks everyone
    #7
    Jump to:
  • Back to Mobile