BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
It doesn't launch after opening the app with administrative rights. I've installed the IntelME drivers from the Z390s download driver page, or at least I think I have. There's additional drivers that come with the "IntelME" driver and I have no idea how or what they install. Any help would be appreciated!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: E-leetX 1.0.6 on Z390
2018/11/28 18:08:20
(permalink)
ByteXavier
Sajin 2. Nope, just make sure all your drivers are completely up to date.
Can you guide me through the process of installing drivers on a Z390 FTW? IntelME and IntelRST have multiple drivers, i'm not sure how to install them.
For IntelME... #1 Open folders ME_SW_MSI\Production. #2 Run SetupME.exe #3 Install the defaults and reboot the computer. The installer will only install what is needed. For IntelRST... #1 Open folders Installer\RST\RST #2 Run SetupRST.exe #3 Install the defaults and reboot the computer. The installer will only install what is needed. Done.
|
BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
Re: E-leetX 1.0.6 on Z390
2018/11/28 19:04:16
(permalink)
Is IntelRST really needed for E-leet? I hear RST is nothing but problems?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: E-leetX 1.0.6 on Z390
2018/11/28 19:08:43
(permalink)
No, it isn't needed for eleet.
|
BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
Re: E-leetX 1.0.6 on Z390
2018/11/28 19:10:20
(permalink)
Sajin No, it isn't needed for eleet.
Well I have pretty much everything else installed and E-leet still doesn't open.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: E-leetX 1.0.6 on Z390
2018/11/28 19:42:36
(permalink)
Do you get an error in the windows event viewer?
|
BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
Re: E-leetX 1.0.6 on Z390
2018/11/28 19:46:28
(permalink)
Event Error Faulting application name: ELeetX_x64.exe, version: 1.0.6.0, time stamp: 0x5be54a1b Faulting module name: ELeetX_x64.exe, version: 1.0.6.0, time stamp: 0x5be54a1b Exception code: 0xc0000005 Fault offset: 0x0000000000026d98 Faulting process id: 0x464c Faulting application start time: 0x01d48795ee223030 Faulting application path: C:\Program Files (x86)\EVGA\ELeetX\ELeetX_x64.exe Faulting module path: C:\Program Files (x86)\EVGA\ELeetX\ELeetX_x64.exe Report Id: 55584553-8f5f-4f81-83b8-98d06990f793 Faulting package full name: Faulting package-relative application ID:
I also tried EVGA Flow Control and I get a "Device not found"
post edited by ByteXavier - 2018/11/28 19:48:31
|
BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
Re: E-leetX 1.0.6 on Z390
2018/11/28 23:56:49
(permalink)
So I went back into my hardware and readjusted the mini-USB to USB molex cable that connects the pump to the motherboard and apparently one of these sides wasn't fully connected. As soon as I booted up, the letters "GPM" lit up on my GPU (which is new) and my pump is in full RGB wave mode. On top of that, E-leet works now!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: E-leetX 1.0.6 on Z390
2018/11/28 23:58:52
(permalink)
|
BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
Re: E-leetX 1.0.6 on Z390
2018/11/29 00:02:33
(permalink)
Oh wait, it just went down again after messing with the RGB profiles. I think it went down when I enabled "temp" but I did manage to see that I couldn't sync my GPU in E-leet, any ideas?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: E-leetX 1.0.6 on Z390
2018/11/29 00:07:00
(permalink)
Uninstall the software, delete the main evga folder inside c:\program files (x86), reboot pc, reinstall the software. Retest.
post edited by Sajin - 2018/11/29 00:09:15
|
BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
Re: E-leetX 1.0.6 on Z390
2018/11/29 00:18:42
(permalink)
It seems to be working again, but I still can't sync my GPU or "VGA" as it were on the LED Sync GUI of E-leet, my 1080 just doesn't show up. Also, is it possible to run PrecisionX OC with E-leet and does the RGB modify further than just the "GMP" letters of the GPU?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: E-leetX 1.0.6 on Z390
2018/11/29 00:21:56
(permalink)
Running pxoc & eleet at the same time shouldn't be a problem. I think you should be able to modify more than just the gpm letters.
|
BitXavier
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2018/11/23 21:54:54
- Status: offline
- Ribbons : 0
Re: E-leetX 1.0.6 on Z390
2018/11/29 00:28:16
(permalink)
Sajin Running pxoc & eleet at the same time shouldn't be a problem. I think you should be able to modify more than just the gpm letters.
I can't seem to modify anything other than the "GMP" letters. Maybe the same issue dealing with it not showing up on E-leet to "LED Sync". Am I supposed to have something connected to my GPU other than the 8-pin power module?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: E-leetX 1.0.6 on Z390
2018/11/29 00:41:53
(permalink)
ByteXavier Am I supposed to have something connected to my GPU other than the 8-pin power module?
Nope
|