EVGA

Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly

Author
Post
Essentials Only Full Version
Digital_Fuzion
SSC Member
  • Total Posts : 630
  • Reward points : 0
  • Joined: 2015/05/13 16:30:58
  • Status: offline
  • Ribbons : 1
2018/11/26 21:41:38 (permalink)
Will Corsair memory model CMU32GX4M4C3000C15B run on the DARK X299 or X299 FTWK? Is this memory listed on EVGA's QVL? Is it compatible with both motherboards?
 

#1

26 Replies Related Threads
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/26 21:56:40 (permalink)
    Check the QVL Lists here - https://www.evga.com/support/motherboard/
    #2
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/26 23:49:24 (permalink)
    I checked the EVGA QVL and from what I can see. There is no support for either motherboards. What motherboard supports this type of memory? I'm so confused?  
    #3
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 00:00:10 (permalink)
    Digital_Fuzion
    I checked the EVGA QVL and from what I can see. There is no support for either motherboards. What motherboard supports this type of memory? I'm so confused?  




    Corsair and their lame compatibility / spec listings. They make you grab a PDF for everything and the one for their memory is formatted horribly
    Go here, scroll to down loads lower on the page (next to tech specs) and download the PDF - look to see what they have tested their memory on
    https://www.corsair.com/u.../p/CMU32GX4M4C3000C15B
     
    Correct PDF is the bottom right - DDR4 Motherboard compt
    #4
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 00:17:06 (permalink)
    This is why Corsair has fallen off my list of good stuff - they seem to be off in lala land
     
    I went through their site in the menus to find the matching Recommend X299 Blue LED set of memory - CMU32GX4M4D3000C16B
    Slight difference in part number the OP listed
    This is from the Tech Specs listing -

    Compatibility
    Intel 100 Series,Intel 200 Series,Intel 300 Series,Intel X99,Intel X299,AMD 300 Series, AMD 400 Series

    The Tested board PDF is the exact same one I found for the other kit - THEY ONLY LIST X99 and some Z170 boards - not a single AMD board was listed as tested in the group quoted and nope, not a single X299 board nor most of the others
     
    /rant
     
    https://www.corsair.com/u.../p/CMU32GX4M4D3000C16B

     
    #5
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 00:21:01 (permalink)
    Well that's what I get talking to an MSI tech support rep prior to the purchase of the X299 They said the memory was on their QVL. Which I'm running this memory on the motherboard now. It has not hurt the motherboard other then sometimes the bios fails to overclock due to the memory issues and has to be reset down clocking the memory speed. Your exactly right! All I see that the memory I'm using is for X99 and Z series motherboards. So here's what I'm looking for. QUAD Channel DDR4 3600MHZ 32GB Kit with cool blue LED or RGB that offers a blue color scheme. What is a better option and price point beside Corsair? I'm ready to try another good brand recommendation. My motherboard is an MSI Gaming Pro Carbon X299 standard. Not the AC version. MSI QVL: https://www.msi.com/Motherboard/support/X299-GAMING-PRO-CARBON#support-mem-3 My processor is an Intel i9 7900X 10-Core. 
    post edited by Digital_Fuzion - 2018/11/27 00:37:26
    #6
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 00:36:17 (permalink)
    Digital_Fuzion
    Well that's what I get talking to an MSI tech support rep prior to the purchase of the X299 which I'm running this memory on. It has not hurt the motherboard. Your exactly right. All I see that the memory I'm using is for X99  and Z series mother boards. So here's what I'm looking for. QUAD Channel DDR4 3600MHZ 32GB Kit with Blue LED or RGB that offers a blue color scheme. What is a better option and price point beside Corsair. I'm ready to try another good brand recommendation. My motherboard is an MSI Gaming Pro Carbon X299 standard. Not the AC version. MSI QVL: https://www.msi.com/Motherboard/support/X299-GAMING-PRO-CARBON#support-mem-3 My processor is an Intel i9 7900X 10-Core.




     
    https://www.gskill.com/en/product/f4-3000c14q-32gtzr
     
    They have the QVL right there on the product page and your board is listed
     
    3200 speed - https://www.gskill.com/en/product/f4-3200c14q-32gtzr
     
    The only kits they have listed quad channel for 3600 is 64gb and 128gb which seems to be a bit crazy
     
    This is the kit I used on my X299 Dark - https://www.gskill.com/en/product/f4-3866c18q-32gtzr 
     
    The issue is the bumping up the speed you have to loosen the timings
     
    Two Buildzoid videos to watch on the subject - a bit heavy on subject matter
    https://youtu.be/Ke_JgL8gxsA     and   https://youtu.be/8P1TmrtRu6E
     
    post edited by GGTV-Jon - 2018/11/27 00:56:32
    #7
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 00:51:00 (permalink)
    A big thanks! Will this work > https://www.ebay.com/itm/G-SKILL-TridentZ-RGB-Series-32GB-4-x-8GB-288-Pin-DDR4-SDRAM-DDR4-3200-PC4-256/302921365102?epid=234103435&hash=item468785366e:g:pNgAAOSw831bxAcR:rk:44:pf:0 I assume it will. But after so much pain in looking I want to double check with you again.
     And if so this should be a quad channel memory configuration?
    post edited by Digital_Fuzion - 2018/11/27 01:00:14
    #8
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 00:59:34 (permalink)
    Digital_Fuzion
    A big thanks! Will this work > https://www.ebay.com/itm/G-SKILL-TridentZ-RGB-Series-32GB-4-x-8GB-288-Pin-DDR4-SDRAM-DDR4-3200-PC4-256/302921365102?epid=234103435&hash=item468785366e:g:pNgAAOSw831bxAcR:rk:44:pf:0
     
    And if so will this be quad channel memory configuration versus the two stick setup dual channel?




    Yup, that is this kit - https://www.gskill.com/en/product/f4-3600c16q-32gtzr   it is an 16-16-16-36 kit
     
    I edit my post above - watch the Buildzoide videos, hopefully it doesn't make your head explode
    #9
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49165
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 01:12:23 (permalink)
    Just because the memory isn't listed on the qvl doesn't mean it won't work.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #10
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 01:17:06 (permalink)
    Sajin
    Just because the memory isn't listed on the qvl doesn't mean it won't work.




    It won't work for very long at the clock speeds of 3000MHz without resetting the bios back to default every couple of days. Press F1 to enter the bios. Sets it's self back to default. The bios says failed to overclock. So I think this will fix the problem getting VQL preferred memory. I can sell off the current memory to recover some costs.
    #11
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49165
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 01:27:00 (permalink)
    You may be able to fix that by tweaking voltages.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #12
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 01:42:22 (permalink)
    Sajin
    You may be able to fix that by tweaking voltages.


    I'm up for suggestions. I haven't clicked the order button yet. Also MSI said they couldn't duplicate the problem other than the memory is not on their qvl. What settings in the bios interphase should I be adjusting and to what level? There is an option for XMP profile to be enabled. Not too sure about the voltage but I definitely could learn if you would please explain and perhaps provide a screenshot or better yet I could provide the screenshots of the BIOS voltage controls so we can tweak to see if it fixes the problem.
    #13
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49165
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 01:48:41 (permalink)
    Try setting your vsa & vccio voltages to 1.2v.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #14
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 06:43:59 (permalink)
    Sajin
    Try setting your vsa & vccio voltages to 1.2v.




    Do I leave XMP Profile enabled also? I need to know the little things in addition to the voltage adjustments. I might need to send you a screenshot of this Bios. I do not see what you refer to as VSA & VICCIO settings.
    post edited by Digital_Fuzion - 2018/11/27 06:54:06
    #15
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 07:14:31 (permalink)
    @Digital_Fuzion
    https://www.corsair.com/us/en/memoryfinder?type=motherboard Shows No EVGA X299 Support.
    https://www.corsair.com/us/en/memoryfinder?type=memorytype By Memory Type and Chipset.
    But I use Corsair memory not listed on EVGA https://www.evga.com/support/motherboard/
    You just will have to test it.
    Using DOMINATOR Platinum 32GB (4x8GB) DDR4 3600 CMD32GX4M4B3600C16 on my X299 FTW K MB
    Using Ripjaws V Series 3200 (PC4 25600) F4-3200C14Q-64GVK Split between two X299 Dark MB
     
    post edited by bcavnaugh - 2018/11/27 14:23:59

    Associate Code: 9E88QK5L7811G3H


     
    #16
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49165
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 12:07:24 (permalink)
    Digital_Fuzion
    Sajin
    Try setting your vsa & vccio voltages to 1.2v.




    Do I leave XMP Profile enabled also? I need to know the little things in addition to the voltage adjustments. I might need to send you a screenshot of this Bios. I do not see what you refer to as VSA & VICCIO settings.


    Try both methods of setting the ram if the other causes issues, so set your ram manually if xmp causes issues.
     

     
    Note: X299 dark bios picture above. Both VSA & VCCIO are shown.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #17
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 12:43:45 (permalink)
    @Digital_Fuzion
    My understating of the XMP Profile and on the X299 Dark & X299 FTW you need Two DIMMS to work.
    post edited by bcavnaugh - 2018/11/27 14:20:24

    Associate Code: 9E88QK5L7811G3H


     
    #18
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 18:24:27 (permalink)

    My motherboard is an MSI Gaming Pro Carbon X299 standard. Not the AC version.

     
    Remember guys, he is on an Asus MSI board...
    post edited by GGTV-Jon - 2018/12/04 19:16:59
    #19
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49165
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 19:01:39 (permalink)
    GGTV-Jon

    My motherboard is an MSI Gaming Pro Carbon X299 standard. Not the AC version.

     
    Remember guys, he is on an Asus board...


    In that case the adjustments that I'm talking about are called cpu sa voltage & cpu io voltage.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #20
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/27 21:23:30 (permalink)
    Need to wait then for the OP to get his X299 Dark in hand to test his memory

    Associate Code: 9E88QK5L7811G3H


     
    #21
    startekselva
    iCX Member
    • Total Posts : 300
    • Reward points : 0
    • Joined: 2018/10/23 00:47:45
    • Status: offline
    • Ribbons : 6
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/11/29 09:12:49 (permalink)
    all xmp 2.0 quad channel kit will work just fine depends on cpu 




    #22
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/12/04 15:52:59 (permalink)
    FYI update: I pulled the trigger and purchased the G.SKILL Trident Z RGB Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 256) It's the best decision I have made. Now I have no issues with the bios resetting back to default. My prior memory was not on MSI's VQL list or said memory was not tested from MSI. I also have better video playback. For
    some odd reason with the previous memory I was having video encoding problems with pixels. I think the overall memory used prior was causing glitches here and there with certain software and apps. Now all I need to do is upgrade my monitor. I hope NVIDIA fixes the issues with their drivers and g-sync. 
     

    post edited by Digital_Fuzion - 2018/12/04 16:11:00
    #23
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/12/04 19:12:39 (permalink)
    Nice!!,
    What CAS was that kit, the C14 or C16?
    #24
    GGTV-Jon
    FTW Member
    • Total Posts : 1813
    • Reward points : 0
    • Joined: 2017/11/25 14:11:43
    • Location: WA, USA
    • Status: offline
    • Ribbons : 19
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/12/04 19:15:07 (permalink)
    Sajin
    GGTV-Jon

    My motherboard is an MSI Gaming Pro Carbon X299 standard. Not the AC version.

     
    Remember guys, he is on an Asus board...


    In that case the adjustments that I'm talking about are called cpu sa voltage & cpu io voltage.




     
    Wow, I just realized the huge typo I made and was not called out for it - I said Asus when right there in the quote I had from Digital he had said MSI
    #25
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 30975
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 122
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/12/04 19:21:47 (permalink)
    GGTV-Jon
    Sajin
    GGTV-Jon

    My motherboard is an MSI Gaming Pro Carbon X299 standard. Not the AC version.

     
    Remember guys, he is on an Asus board...


    In that case the adjustments that I'm talking about are called cpu sa voltage & cpu io voltage.




     
    Wow, I just realized the huge typo I made and was not called out for it - I said Asus when right there in the quote I had from Digital he had said MSI




    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

     https://foldingathome.org -->become a citizen scientist and contribute your compute power to help fight global health threats

    RTX Project EVGA X99 FTWK Nibbler EVGA X99 Classified EVGA 3080Ti FTW3 Ultra


    #26
    Digital_Fuzion
    SSC Member
    • Total Posts : 630
    • Reward points : 0
    • Joined: 2015/05/13 16:30:58
    • Status: offline
    • Ribbons : 1
    Re: Question about EVGA QVL and EVGA Dark X299./X299 FTW K compatibly 2018/12/05 00:20:11 (permalink)
    GGTV-Jon
    Nice!!,
    What CAS was that kit, the C14 or C16?




    I got the CL 16 kit. Here's a close up picture.
     

    #27
    Jump to:
  • Back to Mobile