I was hoping some of you more experienced tweakers could point me in the right direction...
I'm running into a rounding error (.5 when expecting less than .4) when running latest version of Prime95. From what I've read this error typically means voltage to CPU and/or DIMMs should be bumped up or the RAM timings are off.
BUT, i get this error within a few minutes of running the torture test on all threads, and i receive this error whether running CPU on
stock settings, not just overclocked settings. i'm running my ram on it's XMP profile 1. My PSU is overkill so voltages should be sufficient.
Where should I begin looking to trouble shoot this? Passmark burn-in testing passes, although I've only run it in 15 minute intervals.
My thermals appears to be fine using intel's XTU stress testing, under 80c. EVGA RoboOC suggests 4800mhz for the OC and the bios stress testing keeps thermals under 80c as well.
Fractal Define R6 Blackout TG
EVGA X299 Dark, bios 1.12
Intel Core i9-7900X Processor delid with derbauer direct die frame/conductonaut liquid metal
G.SKILL TridentZ RGB Series 64GB (4 x 16GB) DDR4 3600 (17-19-19-39) F4-3600C17Q-64GTZR
EVGA GeForce GTX 1080 Founders Edition
EVGA CLC 240 400-HY-CL24-V1
EVGA SuperNova 1600 T2
Samsung 960 EVO Pro Series - 1TB PCIe NVMe - M.2 Internal SSD (MZ-V6P1T0BW)
Intel Gigabit Ethernet i210AT and i219V
Windows 7 - Ultimate
post edited by ChintzyButters - 2018/11/13 21:32:33
Attached Image(s)