EVGA

Precision X1 0.3.5.1 Firmware update failed

Author
Post
Essentials Only Full Version
morph3us
New Member
  • Total Posts : 17
  • Reward points : 0
  • Joined: 2007/08/03 02:19:56
  • Status: offline
  • Ribbons : 0
2018/11/04 12:09:20 (permalink)
Hello,
 
I am trying to using Precision X1 with my RTX 2080 TI , and I can not get past the Flash tool Firmware update failed screen. I am running Windows 7 x64 , and tried uninstalling and reinstalling both x1 ( and earlier builds ) as well as uninstalling and reinstalling .net
 
in event view I see a .net crash 
 
Application: PX18.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.NullReferenceException
at PX18.Program.OnResolveAssembly(System.Object, System.ResolveEventArgs)
at System.AppDomain.OnAssemblyResolveEvent(System.Reflection.RuntimeAssembly, System.String)
 
as well as 
 
 
Faulting application name: PX18.exe, version: 0.3.5.1, time stamp: 0x5bd96d30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.24260, time stamp: 0x5b9470f4
Exception code: 0xe0434352
Fault offset: 0x000000000000bded
Faulting process id: 0x1ea8
Faulting application start time: 0x01d47478976cc0ca
Faulting application path: C:\Program Files\EVGA\Precision X1\PX18.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: dc9ab365-e06b-11e8-9966-74d435e74331

Attached Image(s)

#1

28 Replies Related Threads
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 12:21:57 (permalink)
    Is the RTX 2080 TI the only card installed?
    Not other Programs running and Disable Virus Software.
    Most if not all Virus Software will not allow Programs to run from the Temp Directory.
    post edited by bcavnaugh - 2018/11/04 12:24:47

    Associate Code: 9E88QK5L7811G3H


     
    #2
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49167
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 13:56:29 (permalink)
    Navigate to C:\Program Files\EVGA\Precision X1\Firmware and delete all the files inside the folder, then try starting px1 again. See if that helps or not.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #3
    morph3us
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2007/08/03 02:19:56
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 14:15:04 (permalink)
    Sajin
    Navigate to C:\Program Files\EVGA\Precision X1\Firmware and delete all the files inside the folder, then try starting px1 again. See if that helps or not.


    Now i get a prompt that firmware file does not exist.  Then it just closes
     
     
    bcavnaugh
    Is the RTX 2080 TI the only card installed?
    Not other Programs running and Disable Virus Software.
    Most if not all Virus Software will not allow Programs to run from the Temp Directory.




    Yup only card installed ( other than intel integrated video ) 
    it's running from program files.
     
    All antivirus disabled. 
    #4
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 14:22:32 (permalink)
    "Now i get a prompt that firmware file does not exist" Uninstall PX1 restart the PC an then install PX1
    Remember also to Right Click on the File and Select Run as administrator.

    Associate Code: 9E88QK5L7811G3H


     
    #5
    morph3us
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2007/08/03 02:19:56
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 14:50:33 (permalink)
    bcavnaugh
    "Now i get a prompt that firmware file does not exist" Uninstall PX1 restart the PC an then install PX1
    Remember also to Right Click on the File and Select Run as administrator.




    uninstalled, rebooted , reinstalled, ran as admin. still same error.
     
    #6
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 14:55:47 (permalink)
    Are you on an AMD Based Motherboard?

    Associate Code: 9E88QK5L7811G3H


     
    #7
    morph3us
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2007/08/03 02:19:56
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 14:57:13 (permalink)
    Negative. Gigabyte GA-Z97X-GAMING G1 WIFI-BK
    #8
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 15:10:19 (permalink)
    Is the On Board Video is Disabled in the Bios?
    And you have Pro or above and Not Windows 7 HOME Correct?
    post edited by bcavnaugh - 2018/11/04 15:12:21

    Associate Code: 9E88QK5L7811G3H


     
    #9
    morph3us
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2007/08/03 02:19:56
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 18:36:57 (permalink)
    bcavnaugh
    Is the On Board Video is Disabled in the Bios?
    And you have Pro or above and Not Windows 7 HOME Correct?




     
    Onboard video disabled in bios
     
    Windows 7 ultimate
    #10
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 18:39:19 (permalink)
    What NVIDIA Driver do you have installed?

    Associate Code: 9E88QK5L7811G3H


     
    #11
    morph3us
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2007/08/03 02:19:56
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 18:54:56 (permalink)
    25.21.14.1634 ( add remove programs shows 416.34
    post edited by morph3us - 2018/11/04 18:59:26
    #12
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 19:01:21 (permalink)
    I was having issues myself with Driver 416.34 and went back to 416.16.
    But even under 416.34 I did not have this issue so we can only blame it on the OS Windows 7 that is.
    Others are also having issues with Windows 7.
     
    You could uninstall all the NVIDIA Drivers and Software and run DDU in Safe Mode to clean up.
    Then Install the NVIDIA Graphics Driver and PhysX Driver and the USB Driver.
    Do Not install GeForce Experience.
     
    Do the Below before you uninstall the NVIDIA Drivers and Software
    Uninstall PX1 & LED Sync (Add Remove Programs)
    Then do the below
    Delete the Folder C:\Users\UserName\AppData\Local\PX18
    Under the Folder C:\Users\UserName\AppData\Local
    Delete File ledConfiguration.config
    Under C:\Windows
    Delete File PrecisionX_x64.INI
    Delete the Folder c:\Program Files (x86)\EVGA 
    Delete the Folder c:\Program Files\EVGA
     
    This is based on PX1 being install under Windows 10 but should be same under Windows 7.
    post edited by bcavnaugh - 2018/11/04 19:14:44

    Associate Code: 9E88QK5L7811G3H


     
    #13
    morph3us
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2007/08/03 02:19:56
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 19:38:43 (permalink)
    Where did you see the USB driver?
     
     

    Do the Below before you uninstall the NVIDIA Drivers and Software
    Uninstall PX1 & LED Sync (Add Remove Programs) done
    Then do the below
    Delete the Folder C:\Users\UserName\AppData\Local\PX18 - not present
    Under the Folder C:\Users\UserName\AppData\Local Delete File ledConfiguration.config - not present
    Under C:\Windows - Delete File PrecisionX_x64.INI  - done
    Delete the Folder c:\Program Files (x86)\EVGA  done
    Delete the Folder c:\Program Files\EVGA - done
     
    then rebooted into safe mode ran ddu , rebooted into normal mode , installed nvidia drivers rebooted. installed px1, ran as admin same error.
     
    I didnt get prompted for usb drivers though.
     
     
    post edited by morph3us - 2018/11/04 19:48:07

    Attached Image(s)

    #14
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/04 19:45:53 (permalink)
    morph3us
    Where did you see the USB driver?

    Do the Below before you uninstall the NVIDIA Drivers and Software
    Uninstall PX1 & LED Sync (Add Remove Programs) done
    Then do the below
    Delete the Folder C:\Users\UserName\AppData\Local\PX18 - not present
    Under the Folder C:\Users\UserName\AppData\Local Delete File ledConfiguration.config - not present
    Under C:\Windows - Delete File PrecisionX_x64.INI  - done
    Delete the Folder c:\Program Files (x86)\EVGA  done
    Delete the Folder c:\Program Files\EVGA - done
     
    then rebooted into safe mode ran ddu , rebooted into normal mode , installed nvidia drivers rebooted. installed px1, ran as admin same error.
     

    I didnt get prompted for usb drivers though.
      


    When you install the Driver your Select Graphics Driver then then next screen show a box on the Bottom Check it to do a Clean Install next you will see what all is listed you uncheck all but the Driver and PhysX Driver then you will see at the bottom a NVIDIA USB Driver, but like I said this is based on a Windows 10 install and users hare having issues in general with the RTX Drivers on Windows 7.
     
    Time to update to Windows 10.
    You could put your Card in a Windows 10 Computer and update the Firmware.
    You know this could be a Ploy from Microsoft to Force Users to move off of Windows 7, 8, and 8.1 over to Windows 10.
    post edited by bcavnaugh - 2018/11/05 08:26:09

    Associate Code: 9E88QK5L7811G3H


     
    #15
    chriskuen
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2018/10/27 23:11:50
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/05 07:44:56 (permalink)
    I have the same problem with window 7 X64. 1st time can update and it requested to restart window. After that always shows Firmware update failed.
    #16
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/05 08:21:10 (permalink)
    chriskuen
    I have the same problem with window 7 X64. 1st time can update and it requested to restart window. After that always shows Firmware update failed.

    Put your Card in a Windows 10 Computer and update the Firmware.
    Time to update to Windows 10.
    post edited by bcavnaugh - 2018/11/05 08:25:43

    Associate Code: 9E88QK5L7811G3H


     
    #17
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/05 11:51:28 (permalink)
    I get to play with this on my Windows 7 Gaming Rig this week - weekend and will post my findings.
    post edited by bcavnaugh - 2018/11/06 23:41:32

    Associate Code: 9E88QK5L7811G3H


     
    #18
    Lamanator
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 2018/07/15 10:05:49
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/05 12:16:37 (permalink)
    I have the exact same issue on Windows 10. The OS is not the problem.
    #19
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/05 12:20:35 (permalink)
    Lamanator
    I have the exact same issue on Windows 10. The OS is not the problem.


    Not from what I am Seeing and Testing.
    Create your own Tread on your issues and the Forum Members will give you a helping hand.

    Associate Code: 9E88QK5L7811G3H


     
    #20
    chriskuen
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2018/10/27 23:11:50
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/11/06 23:32:47 (permalink)
    bcavnaugh
    chriskuen
    I have the same problem with window 7 X64. 1st time can update and it requested to restart window. After that always shows Firmware update failed.

    Put your Card in a Windows 10 Computer and update the Firmware.
    Time to update to Windows 10.




    I put it in a window 10 computer but still cant update the firmware.
    PX1 seems work except LED still turn off and cant control.
    Thank you for your help.
    #21
    morph3us
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2007/08/03 02:19:56
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/12/17 22:34:59 (permalink)
    I can't link because I am a new member but  wrote up a fix. 
     
    squall-leonhart
    Steveklo
    Just tried dl and running 0.3.10 and it still isn't working for me running Windows 7 64 bit.




    This is getting ridiculous, i've practically told EVGA Developers how to rectify this.
     
    It's an absolute (removed) lie that it was developed for 10 as the Assembly that it is failing on was provided to 8.0, its a simple fix i could do it i under 5 minutes myself.
     
    EVGA, your developers are LIARS.
     
    Guys, i will make a fix for this over the next week or so, if the evga half rate hacks aren't going to make a simple non-consequential change to the base aero assembly in use, i'll just provide you a way to install the one needed.
     
    And done

     
    setup is unsigned, files installed are all microsoft signed.



     
    edit by Cool GTX - Language removed - 


    #22
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49167
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/12/17 23:37:36 (permalink)
    Here is the link to the fix morph3us is talking about... https://forums.evga.com/FindPost/2896638


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #23
    speedman2006
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2018/12/13 11:55:06
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/12/19 07:21:46 (permalink)
    I got my 2080 ti xc ultra yesterday and cannot make the rgb to work.
    I have windows 10,on an amd system(Asus Crosshair VI + Ryzen 1700).I installed px1 and cannot control any of the rgb.
    On the px1 I have 3 tabs on top VGA1 LED HMW.
    Let me know if I did something wrong how to make it work.
    Thank you
    #24
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/12/19 14:12:14 (permalink)
    speedman2006
    I got my 2080 ti xc ultra yesterday and cannot make the rgb to work.
    I have windows 10,on an amd system(Asus Crosshair VI + Ryzen 1700).I installed px1 and cannot control any of the rgb.
    On the px1 I have 3 tabs on top VGA1 LED HMW.
    Let me know if I did something wrong how to make it work.
    Thank you


    Install Version 0.3.9 and make sure you Do Not Have it start with the OS.
    Under 0.3.10 both cards the LED Screen is not showing.
    Under 0.3.9 both cards the LED Screen is not showing if started with the OS, other wise it is working fine.
     Under 0.3.9 as long as you do not set PX1 to start with the OS.

     
    Under 0.3.10 this is all I see and under 0.3.9 if I set PX1 to start with the OS I see the same.

    post edited by bcavnaugh - 2018/12/19 14:16:20

    Associate Code: 9E88QK5L7811G3H


     
    #25
    speedman2006
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2018/12/13 11:55:06
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2018/12/20 02:30:41 (permalink)
    Thank you for the info.
    Just today when I came home and started my pc I saw px1 started to work and updated the firmware.
     
    #26
    miguelfpedro
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2019/02/04 12:40:06
    • Status: offline
    • Ribbons : 0
    Re: Precision X1 0.3.5.1 Firmware update failed 2019/02/12 13:54:14 (permalink)
    I need help guys. After i install precision x1 the lights just turned off and dont turn on again.  The precision x1 failed to update software 
    My graphic card is Nvidia Geforce 2080ti Black edition EVGA 
    #27
    markuaw1
    iCX Member
    • Total Posts : 329
    • Reward points : 0
    • Joined: 2017/12/15 17:17:39
    • Status: offline
    • Ribbons : 1
    Re: Precision X1 0.3.5.1 Firmware update failed 2019/02/12 15:50:23 (permalink)
    miguelfpedro
    I need help guys. After i install precision x1 the lights just turned off and dont turn on again.  The precision x1 failed to update software 
    My graphic card is Nvidia Geforce 2080ti Black edition EVGA 


    what OS are you running Windows 10 ?
    #28
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49167
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Precision X1 0.3.5.1 Firmware update failed 2019/02/12 17:21:08 (permalink)
    miguelfpedro
    I need help guys. After i install precision x1 the lights just turned off and dont turn on again.  The precision x1 failed to update software 
    My graphic card is Nvidia Geforce 2080ti Black edition EVGA 


    You'll need to contact evga support... https://www.evga.com/about/contactus/


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #29
    Jump to:
  • Back to Mobile