TheTiesThatBind
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2018/08/11 00:45:27
- Location: Greece
- Status: offline
- Ribbons : 0
Hey there, I recently downloaded HWInfo64 and when I launch it, it says that my GPU is the "EVGA GTX 1080 FTW2 DT iCX" instead of the "EVGA GTX 1080 FTW2 iCX" is that some wrong reading or what?
Thanks in advance
NZXT H700 BLACK | CORSAIR RM750X | MSI PRO Z790-A WI-FI | INTEL I7-13700K | G.SKILL TRIDENT Z5 RGB 32GB DDR5-6400MHz | EVGA GEFORCE RTX 3070 Ti SUPER FTW3 ULTRA | KINGSTON KC3000 NVMe M.2 1TB | SAMSUNG 970 EVO PLUS NVMe M.2 1ΤΒ | SAMSUNG 860 EVO 500GB | SANDISK ULTRA 3D 1TB | CORSAIR H150i ELITE
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re: HWINFO64 readings
2018/09/24 05:37:26
(permalink)
apparently you bought a downtuned model.
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: HWINFO64 readings
2018/09/24 05:38:06
(permalink)
What is your part number and what bios revision is loaded?
It may just be misreading the device id or have the wrong bios loaded. Your part number and bios number should be able to give a little insight as to what is happening.
|
Bobmitch
Omnipotent Enthusiast
- Total Posts : 8328
- Reward points : 0
- Joined: 2007/05/07 09:36:29
- Status: offline
- Ribbons : 47
Re: HWINFO64 readings
2018/09/24 06:07:07
(permalink)
Also, make sure that you have the most up to date HWInfo. It should be 5.88
Ran it just now and it says I have a 1080TI Black Edition...that's how specific it should read the card
MSI MAG X670-E Tomahawk; Ryzen 7 7800X3D; Asus TUF RTX 4070 TI OC; Seasonic Vertex GX-1000 PSU; 32 GB Corsair Vengeance DDR5-6000 RGB; Corsair iCue Link H150i RGB 360MM AIO; 2-Western Digital Black 4 TB SN850X NVMe; Creative SoundBlaster Z; Lian Li Lancool III; EVGA Z15 Keyboard; Razer Viper 8K Mouse
Heatware: http://www.heatware.com/eval.php?id=72402 Affiliate code: 1L2RV0BNQ6 Associate Code: UD82LJP3Y1FIQPR
|
TheTiesThatBind
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2018/08/11 00:45:27
- Location: Greece
- Status: offline
- Ribbons : 0
Re: HWINFO64 readings
2018/09/24 06:17:08
(permalink)
squall-leonhart
apparently you bought a downtuned model.
If I was to buy the DT version, I wouldn't even ask captain obvious, thanks though. the_Scarlet_one
What is your part number and what bios revision is loaded?
It may just be misreading the device id or have the wrong bios loaded. Your part number and bios number should be able to give a little insight as to what is happening.
Where can I see the BIOS Version? My part number is: 08G-P4-6686-KR plus correct me if I'm wrong but DT version would be mentioned on the box of the card as well, wouldn't it? If the BIOS Version mentioned in GPU-Z is correct then its the 86.04.60.40.82 HWInfo64 version is 5.88-3510
post edited by TheTiesThatBind - 2018/09/24 06:19:43
NZXT H700 BLACK | CORSAIR RM750X | MSI PRO Z790-A WI-FI | INTEL I7-13700K | G.SKILL TRIDENT Z5 RGB 32GB DDR5-6400MHz | EVGA GEFORCE RTX 3070 Ti SUPER FTW3 ULTRA | KINGSTON KC3000 NVMe M.2 1TB | SAMSUNG 970 EVO PLUS NVMe M.2 1ΤΒ | SAMSUNG 860 EVO 500GB | SANDISK ULTRA 3D 1TB | CORSAIR H150i ELITE
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: HWINFO64 readings
2018/09/24 06:46:31
(permalink)
TheTiesThatBind
Where can I see the BIOS Version? My part number is: 08G-P4-6686-KR plus correct me if I'm wrong but DT version would be mentioned on the box of the card as well, wouldn't it?
If the BIOS Version mentioned in GPU-Z is correct then its the 86.04.60.40.82
HWInfo64 version is 5.88-3510
Gpu z shows your bios belongs to the DT Contact evga through a support ticket (go through my products if you can) and they can send you the bios exe file that will update the bios for you. Also, check the second bios. The switch should be close to the power plugs on the card. It’s tiny, but switch it to the other bios and see if that reports the incorrect model as well.
|
TheTiesThatBind
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2018/08/11 00:45:27
- Location: Greece
- Status: offline
- Ribbons : 0
Re: HWINFO64 readings
2018/09/24 08:49:24
(permalink)
the_Scarlet_one
TheTiesThatBind
Where can I see the BIOS Version? My part number is: 08G-P4-6686-KR plus correct me if I'm wrong but DT version would be mentioned on the box of the card as well, wouldn't it?
If the BIOS Version mentioned in GPU-Z is correct then its the 86.04.60.40.82
HWInfo64 version is 5.88-3510
Gpu z shows your bios belongs to the DT
Contact evga through a support ticket (go through my products if you can) and they can send you the bios exe file that will update the bios for you.
Also, check the second bios. The switch should be close to the power plugs on the card. It’s tiny, but switch it to the other bios and see if that reports the incorrect model as well.
Do I have to do this while PC is on, OFF, or with Power cord removed from PSU? And if it reports or doesn’t report the same what shall I do?
NZXT H700 BLACK | CORSAIR RM750X | MSI PRO Z790-A WI-FI | INTEL I7-13700K | G.SKILL TRIDENT Z5 RGB 32GB DDR5-6400MHz | EVGA GEFORCE RTX 3070 Ti SUPER FTW3 ULTRA | KINGSTON KC3000 NVMe M.2 1TB | SAMSUNG 970 EVO PLUS NVMe M.2 1ΤΒ | SAMSUNG 860 EVO 500GB | SANDISK ULTRA 3D 1TB | CORSAIR H150i ELITE
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: HWINFO64 readings
2018/09/24 09:26:17
(permalink)
Shut the pc down, switch it over, power back up.
If it shows properly, that is a good thing. You will only need to update one bios. If not, you will need to request both bios versions for the master and the slave switch.
|
TheTiesThatBind
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2018/08/11 00:45:27
- Location: Greece
- Status: offline
- Ribbons : 0
Re: HWINFO64 readings
2018/09/24 10:02:25
(permalink)
Slave BIOS got the same BIOS version.
NZXT H700 BLACK | CORSAIR RM750X | MSI PRO Z790-A WI-FI | INTEL I7-13700K | G.SKILL TRIDENT Z5 RGB 32GB DDR5-6400MHz | EVGA GEFORCE RTX 3070 Ti SUPER FTW3 ULTRA | KINGSTON KC3000 NVMe M.2 1TB | SAMSUNG 970 EVO PLUS NVMe M.2 1ΤΒ | SAMSUNG 860 EVO 500GB | SANDISK ULTRA 3D 1TB | CORSAIR H150i ELITE
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: HWINFO64 readings
2018/09/24 10:20:48
(permalink)
☼ Best Answerby TheTiesThatBind 2018/09/24 10:22:37
I would suggest requesting both Bios for the card from evga at this point. They should definitely be able to provide you with that assistance.
|
TheTiesThatBind
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2018/08/11 00:45:27
- Location: Greece
- Status: offline
- Ribbons : 0
Re: HWINFO64 readings
2018/09/24 10:22:26
(permalink)
the_Scarlet_one
I would suggest requesting both Bios for the card from evga at this point. They should definitely be able to provide you with that assistance.
Already did, thank you for your assistance!
NZXT H700 BLACK | CORSAIR RM750X | MSI PRO Z790-A WI-FI | INTEL I7-13700K | G.SKILL TRIDENT Z5 RGB 32GB DDR5-6400MHz | EVGA GEFORCE RTX 3070 Ti SUPER FTW3 ULTRA | KINGSTON KC3000 NVMe M.2 1TB | SAMSUNG 970 EVO PLUS NVMe M.2 1ΤΒ | SAMSUNG 860 EVO 500GB | SANDISK ULTRA 3D 1TB | CORSAIR H150i ELITE
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: HWINFO64 readings
2018/09/24 10:23:28
(permalink)
Absolutely. Let us know how it goes after you get the new bios’ loaded please.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: HWINFO64 readings
2018/09/24 12:02:35
(permalink)
☄ Helpfulby TheTiesThatBind 2018/09/25 04:15:28
|
Bobmitch
Omnipotent Enthusiast
- Total Posts : 8328
- Reward points : 0
- Joined: 2007/05/07 09:36:29
- Status: offline
- Ribbons : 47
Re: HWINFO64 readings
2018/09/24 15:09:12
(permalink)
☄ Helpfulby TheTiesThatBind 2018/09/25 04:15:24
What you can do is contact the creator of HWInfo. I did when the ICX cards were first released. I had the 1080 SC2 with the ICX controllers and cooler. The author had me create a hardware profile for the video card and within a few days the card read correctly. www.hwinfo.com The author of the software is very accommodating...Give that a try
MSI MAG X670-E Tomahawk; Ryzen 7 7800X3D; Asus TUF RTX 4070 TI OC; Seasonic Vertex GX-1000 PSU; 32 GB Corsair Vengeance DDR5-6000 RGB; Corsair iCue Link H150i RGB 360MM AIO; 2-Western Digital Black 4 TB SN850X NVMe; Creative SoundBlaster Z; Lian Li Lancool III; EVGA Z15 Keyboard; Razer Viper 8K Mouse
Heatware: http://www.heatware.com/eval.php?id=72402 Affiliate code: 1L2RV0BNQ6 Associate Code: UD82LJP3Y1FIQPR
|
_JeffP
EVGA Alumni
- Total Posts : 652
- Reward points : 0
- Joined: 2017/02/20 09:03:47
- Status: offline
- Ribbons : 1
Re: HWINFO64 readings
2018/09/25 02:48:56
(permalink)
☄ Helpfulby TheTiesThatBind 2018/09/25 04:15:19
GPUz and Precision X will show the SSID this should equal the numbers in the part number listed on our website, that will help you know what card you have.
|
TheTiesThatBind
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2018/08/11 00:45:27
- Location: Greece
- Status: offline
- Ribbons : 0
Re: HWINFO64 readings
2018/09/25 04:14:47
(permalink)
the_Scarlet_one
Absolutely. Let us know how it goes after you get the new bios’ loaded please.
Thank you everyone for your replies. According to PrecisionX i'm using 1080 FTW2 (That's correct) and there are no BIOS available at this time, regarding the EVGA support I'm using the latest one! bobmitch
What you can do is contact the creator of HWInfo. I did when the ICX cards were first released. I had the 1080 SC2 with the ICX controllers and cooler. The author had me create a hardware profile for the video card and within a few days the card read correctly.
The author of the software is very accommodating...Give that a try
I will do that, sure thanks for suggesting it. EVGATech_JeffP
GPUz and Precision X will show the SSID this should equal the numbers in the part number listed on our website, that will help you know what card you have.
If I press "Lookup" in GPU-Z redirects me to EVGA GTX 1080 FTW2 w/ iCX Cooler (08G-P4-6686-KR) Sajin
Looks like the , , , , & all use the same vbios, so it's a hwinfo64 hardware identification error. 
So I guess that was just a misreading from HWINFO as Sajin stated. Thanks for all of your help guys
NZXT H700 BLACK | CORSAIR RM750X | MSI PRO Z790-A WI-FI | INTEL I7-13700K | G.SKILL TRIDENT Z5 RGB 32GB DDR5-6400MHz | EVGA GEFORCE RTX 3070 Ti SUPER FTW3 ULTRA | KINGSTON KC3000 NVMe M.2 1TB | SAMSUNG 970 EVO PLUS NVMe M.2 1ΤΒ | SAMSUNG 860 EVO 500GB | SANDISK ULTRA 3D 1TB | CORSAIR H150i ELITE
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: HWINFO64 readings
2018/09/25 09:32:04
(permalink)
|
TheTiesThatBind
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2018/08/11 00:45:27
- Location: Greece
- Status: offline
- Ribbons : 0
Re: HWINFO64 readings
2018/09/25 10:26:54
(permalink)
bcavnaugh
Give this a go, Much Better than HWINFO64
I've heard the opposite that's why I swapped to HWINFO. I only use it for monitoring my temps while trying to maintain stability on system. Weirdly maximus x hero can't run a stable stress test with everything on AUTO and XMP Profile enabled but that's not a matter to be discussed here :P
NZXT H700 BLACK | CORSAIR RM750X | MSI PRO Z790-A WI-FI | INTEL I7-13700K | G.SKILL TRIDENT Z5 RGB 32GB DDR5-6400MHz | EVGA GEFORCE RTX 3070 Ti SUPER FTW3 ULTRA | KINGSTON KC3000 NVMe M.2 1TB | SAMSUNG 970 EVO PLUS NVMe M.2 1ΤΒ | SAMSUNG 860 EVO 500GB | SANDISK ULTRA 3D 1TB | CORSAIR H150i ELITE
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re: HWINFO64 readings
2018/09/26 19:12:48
(permalink)
who'd you hear that crap from, aida64 has superior compatibility over hwinfo, even getting various voltage sensors bios correct instead of being up to 0.3v out.
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|