AngryAce
SSC Member
- Total Posts : 867
- Reward points : 0
- Joined: 2010/03/27 20:40:35
- Location: Nebraska
- Status: offline
- Ribbons : 3
Hi all, I currently have a SuperNova PS 1000 with a set of custom cables from cablemods. I am in the market for a replacement PSU and was looking at the SuperNova P2 1000. Would the cables be interchangeable with the P2? I am hoping so as these cables were more than the PSU itself... . Thanks for any info!
|
EVGATech_MattM
EVGA Tech Support
- Total Posts : 2245
- Reward points : 0
- Joined: 2009/11/18 09:34:00
- Status: offline
- Ribbons : 5
Re: Cablemod custom cables SuperNova 1000PS
2018/07/17 06:17:04
(permalink)
Unfortunately the cables from different lines are not interchangeable as they will have different pin-outs. Due to this cables from PS line will not work with a P2 power supply.
|
AngryAce
SSC Member
- Total Posts : 867
- Reward points : 0
- Joined: 2010/03/27 20:40:35
- Location: Nebraska
- Status: offline
- Ribbons : 3
Re: Cablemod custom cables SuperNova 1000PS
2018/07/17 06:35:31
(permalink)
EVGATech_MattM Unfortunately the cables from different lines are not interchangeable as they will have different pin-outs. Due to this cables from PS line will not work with a P2 power supply.
If I didn't have bad luck, I wouldn't have any luck at all....lol Thanks for reply!
|
EVGATech_MattM
EVGA Tech Support
- Total Posts : 2245
- Reward points : 0
- Joined: 2009/11/18 09:34:00
- Status: offline
- Ribbons : 5
Re: Cablemod custom cables SuperNova 1000PS
2018/07/17 06:43:07
(permalink)
|
notfordman
Omnipotent Enthusiast
- Total Posts : 10345
- Reward points : 0
- Joined: 2007/08/09 23:52:23
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: Cablemod custom cables SuperNova 1000PS
2018/07/17 21:51:13
(permalink)
|
AngryAce
SSC Member
- Total Posts : 867
- Reward points : 0
- Joined: 2010/03/27 20:40:35
- Location: Nebraska
- Status: offline
- Ribbons : 3
Re: Cablemod custom cables SuperNova 1000PS
2018/07/19 08:28:04
(permalink)
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: Cablemod custom cables SuperNova 1000PS
2018/07/19 08:40:06
(permalink)
Ask Cablemods what they would charge to "Re-pin" the custom set you bought - just need to move some wires in the plastic holder on the PSU side Or if they could provide the pin-out / what needs to move if you up for that on your own
|
maxfly
Superclocked Member
- Total Posts : 161
- Reward points : 0
- Joined: 2007/07/19 00:51:09
- Status: offline
- Ribbons : 0
Re: Cablemod custom cables SuperNova 1000PS
2018/07/21 00:00:48
(permalink)
was your old psu out of warranty?
I7 8086K- MSI Z370 Gaming Pro Carbon AC-2x GTX 980 TI4x8GB HyperX Predator RGB DDR4 4000c19Samsung 500GB 960 EVO NVMe M.2 WD Blue 1TB- EVGA SuperNOVA 1300 G2Thermaltake X71 Tempered Glass Edition Black UNDER CONSTRUCTION. EK Supremacy EVO Nickel- EK-FC980 GTX TI x2 XSPC RX360- HWLabs SR2 420- HWLabs GTR 240
|
AngryAce
SSC Member
- Total Posts : 867
- Reward points : 0
- Joined: 2010/03/27 20:40:35
- Location: Nebraska
- Status: offline
- Ribbons : 3
Re: Cablemod custom cables SuperNova 1000PS
2018/07/21 20:03:33
(permalink)
maxfly was your old psu out of warranty?
No, I am building a new system for a family member and since I am paying for it myself I thought I'd slip the new PSU in my rig. Not a big deal however, I have been suffering from random restarts that began today when GFX cards are under load..... Been very frustrating troubleshooting the issue.
|
AngryAce
SSC Member
- Total Posts : 867
- Reward points : 0
- Joined: 2010/03/27 20:40:35
- Location: Nebraska
- Status: offline
- Ribbons : 3
Re: Cablemod custom cables SuperNova 1000PS
2018/07/24 10:13:42
(permalink)
Well, turns out the 1000PS is unstable when running 2 cards in SLI... gonna have to be replaced. Hope they have some available for RMA....
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 122
Re: Cablemod custom cables SuperNova 1000PS
2018/07/24 10:42:19
(permalink)
Long shot maybe.... Confirm your Cable connections, try other PCIe cables, reseat pushing on the wires & not just the plastic retainer
|
AngryAce
SSC Member
- Total Posts : 867
- Reward points : 0
- Joined: 2010/03/27 20:40:35
- Location: Nebraska
- Status: offline
- Ribbons : 3
Re: Cablemod custom cables SuperNova 1000PS
2018/07/28 04:59:43
(permalink)
Cool GTX Long shot maybe.... Confirm your Cable connections, try other PCIe cables, reseat pushing on the wires & not just the plastic retainer
Yeah, I did all that basic trouble shooting stuff already. Been using a 750 P2 as I wait for a replacement without issues... Thanks for tips though!
|
AngryAce
SSC Member
- Total Posts : 867
- Reward points : 0
- Joined: 2010/03/27 20:40:35
- Location: Nebraska
- Status: offline
- Ribbons : 3
Re: Cablemod custom cables SuperNova 1000PS
2018/08/03 13:37:26
(permalink)
Well, I RMA'd the 1000 PS and in return, they sent me a 1000 P2 which renders my custom cables unusable now not to mention messing with my wire management since the P2 is 30mm longer than the PS. Oh well, we are enthusiasts, we like to mess with ours rigs don't we??!!?? I'll just have to have cableMods re-pin the relevant cables and spend an afternoon rerouting wires!
post edited by AngryAce - 2018/08/03 14:22:03
|