4TheGame
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/12/27 19:35:17
- Status: offline
- Ribbons : 0
V 6.2.7
Ive so far saved a set of profiles 8 times. I set several profiles,1,2,3,4,5... then close app, as has been suggested to do, and all works. However if i power down my system, or worse, the driver crashes and recovers, (this the worse possible outcome as i noticed a bad smell coming from computer, and low and behold it turned off fans for all my cards and my 1070 ftw2 was showing 93C, so now i may have 3 damaged EVGA 1070's because of using this EVGA software) all profiles are gone again. is there anyway i can set a profile for my gpu's then remove this "beyond" broken app. Or should i use another gpu control software, like MSI afterburner. Ive not OC my cards, in fact i underclock, (power 70-75%) and only ever used recommended software.
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21171
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/02 13:16:13
(permalink)
First of all, it doesn't sound like your three 1070's are burned out. You say that you are still using them. They must not be burnt out. Second, quit using Precision! If you know it doesn't work, why do you keep using it?! Uninstall Precision. Reboot. Enjoy. The card works by default right out of the box with no software required. If you choose to continue to use something which you know is not functioning correctly, you have few to blame but yourself. https://www.evga.com/precisionXOC/
By choosing to download the software, you affirm that EVGA Precision XOC is supplied "as-is". EVGA Corporation assumes no liability for damages, direct or consequential, which may result from the use of EVGA Precision XOC.
...
By clicking to accept or agree to this License Agreement when downloading or installing the Software, you agree to comply with and be bound by this License Agreement. If you do not agree to this License Agreement, you must not install or use the Licensed Materials.
...
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND EVGA AND ITS AFFILIATES DISCLAIM ALL WARRANTIES OF ANY KIND OR NATURE, WHETHER EXPRESS, IMPLIED, OR STATUTORY, RELATING TO OR ARISING FROM THE SOFTWARE, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT.
...
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EVGA OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, LOSS OF DATA, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF EVGA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
...
post edited by ty_ger07 - 2018/06/02 14:03:33
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
CriticalHit_NL
iCX Member
- Total Posts : 404
- Reward points : 0
- Joined: 2009/09/08 10:23:06
- Status: offline
- Ribbons : 17
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/02 15:17:20
(permalink)
Recently there were issues with automatic fan profiles not staying activated when the program was restarted. These have been solved, although, I've seen different odd behaviour now that only happens sometimes. I turn off my system every evening, and sometimes the next day on start-up the automatic fan profile buttons are all disabled again, though at other times they stay enabled. (iCX card and counts for all fan curves) Either way, it's safe to say Precision XOC still has a lot of kinks to get out of the way before you can blindly trust it again in the background without batting an eye. Edit: I just rebooted and both memory/power fans suddenly were deactivated. I hope EVGA is working hard to fix atleast the bugs with the initial loading of settings when the program starts, this has become a huge drawback after version 6.2.3.
post edited by CriticalHit_NL - 2018/06/02 15:59:14
i7 3930K 4.4Ghz - EVGA 1080Ti FTW3 - 32GB Corsair Dominator DDR3-1866 - Asus Sabertooth X79 - Samsung 840 Pro 256GB - Samsung 860 Pro 2TB - 3x HGST 7K4000 Deskstar 4TB - 3x HGST Ultrastar He10 8TB - Corsair AX1200i - Asus PG279Q + BenQ BL2411 - Razer Viper Mini/SBF98 - Logitech Z906 & G35 - Windows 10 Professional
|
donalgodon
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/10/27 22:08:34
- Status: offline
- Ribbons : 0
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/26 22:41:14
(permalink)
I bought an EVGA SC2 1080Ti, an EVGA power supply, and plenty of other EVGA products, and XOC is such trash that it's the single reason I will never buy another EVGA product again and I would never recommend anyone else to do so based on how the software has performed.
Fix it or release source code and let someone fix it..or at the very least allow MSI Afterburner or some other software to control the fans.
It's pathetic, and from what I've seen, it's not likely to change.
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21171
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 00:28:02
(permalink)
donalgodon
Fix it or release source code and let someone fix it..or at the very least allow MSI Afterburner or some other software to control the fans.
Allow MSI Afterburner...? They are allowed. Unwinder is very capable and could have it working in short order. But Unwinder has specifically said that he has no interest in adding special asynchronous fan control to Afterburner and will refuse to do so even if MSI comes out with an asynchronous fan card. No one is making you use Precision. No one is making you adjust your fan speed. Why not remove Precision and install Afterburner instead? Afterburner can at least control 1 fan; which is more than is necessary.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
thunder-93
iCX Member
- Total Posts : 342
- Reward points : 0
- Joined: 2018/02/03 05:08:23
- Location: Hawaii
- Status: offline
- Ribbons : 4
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 03:27:03
(permalink)
4TheGame
V 6.2.7
Ive so far saved a set of profiles 8 times. I set several profiles,1,2,3,4,5... then close app, as has been suggested to do, and all works. However if i power down my system, or worse, the driver crashes and recovers, (this the worse possible outcome as i noticed a bad smell coming from computer, and low and behold it turned off fans for all my cards and my 1070 ftw2 was showing 93C, so now i may have 3 damaged EVGA 1070's because of using this EVGA software) all profiles are gone again. is there anyway i can set a profile for my gpu's then remove this "beyond" broken app. Or should i use another gpu control software, like MSI afterburner. Ive not OC my cards, in fact i underclock, (power 70-75%) and only ever used recommended software.
Have you tried XOC version 6.2.3? It's more stable and less "quirky" than 6.2.7.
v/r Thunder-93 (Affiliate Code: F8CE835X1W) i7-8700K / Asus ROG Strix Z370-E / EVGA 1080Ti FTW3 Hybrid / EVGA G3 750W / Thermaltake RGB 360 / TridentZ RGB 32GB DDR4-3200CL14 / 960 Evo / 970 Evo / 860 Evo / Firecuda SSHD / InWin 303C RGB  
|
aka_STEVE_b
EGC Admin
- Total Posts : 17692
- Reward points : 0
- Joined: 2006/02/26 06:45:46
- Location: OH
- Status: offline
- Ribbons : 69
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 07:45:22
(permalink)
unfortunately , I would recommend using Afterburner instead of PXoc if you have a card that only has 2 fans
AMD RYZEN 9 5900X 12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 08:10:22
(permalink)
aka_STEVE_b
unfortunately , I would recommend using Afterburner instead of PXoc if you have a card that only has 2 fans
Any “reference pcb” will work, but any non reference pcb with the ICX technology will not work.
|
donalgodon
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/10/27 22:08:34
- Status: offline
- Ribbons : 0
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 12:54:02
(permalink)
ty_ger07
donalgodon
Fix it or release source code and let someone fix it..or at the very least allow MSI Afterburner or some other software to control the fans.
Allow MSI Afterburner...? They are allowed. Unwinder is very capable and could have it working in short order. But Unwinder has specifically said that he has no interest in adding special asynchronous fan control to Afterburner and will refuse to do so even if MSI comes out with an asynchronous fan card.
No one is making you use Precision. No one is making you adjust your fan speed. Why not remove Precision and install Afterburner instead? Afterburner can at least control 1 fan; which is more than is necessary.
I realize that no one is "making me" want to adjust my fan curves or use software to do so, but the point is that the software is the ONLY way to control multiple fans, and no, just letting one fan work is not "good enough." If it were "good enough," then the card would have been designed as a single-fan card. It wasn't. The XOC software sucks, plain and simple, and there's no viable option available to replace the functionality. Period.
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21171
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 12:56:09
(permalink)
the_Scarlet_one
aka_STEVE_b
unfortunately , I would recommend using Afterburner instead of PXoc if you have a card that only has 2 fans
Any “reference pcb” will work, but any non reference pcb with the ICX technology will not work.
They all "work" with Afterburner, just not all features will be available. With Afterburner, you can overclock/underclock the card, set voltage and power limits, and control one of the iCX fans.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 14:31:23
(permalink)
ty_ger07
They all "work" with Afterburner, just not all features will be available. With Afterburner, you can overclock/underclock the card, set voltage and power limits, and control one of the iCX fans.
People want to adjust all two/three fans, and not just one.
post edited by Sajin - 2018/06/27 14:37:57
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21171
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 15:42:02
(permalink)
Sajin
ty_ger07
They all "work" with Afterburner, just not all features will be available. With Afterburner, you can overclock/underclock the card, set voltage and power limits, and control one of the iCX fans.
People want to adjust all two/three fans, and not just one.
Well, they can't with Afterburner. Now we are just repeating ourselves, aren't we? The consumer has the choice. The card works perfectly fine without either Precision or Afterburner being required. They can use one, or the other, or both (not recommended in general), or neither. The OP claims that Precision is ruining his video cards. In such an instance, it is easy to decide to not use the one which is supposedly ruining your video cards. "Want" is a key word.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
Cordorb
SSC Member
- Total Posts : 635
- Reward points : 0
- Joined: 2007/03/18 22:27:50
- Status: offline
- Ribbons : 2
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/27 20:03:11
(permalink)
ok, lets have a 3 position switch (master /slave / sync the other 2 fans to fan one )
if I was doing 24/7 folding or mining my fans would all be directly connected to a power supply
for now I am using an older version where I can at least double check things on my G19 LCD readout.
Saves having to shine a flash light into the case to see if all fans are going.
|
donalgodon
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/10/27 22:08:34
- Status: offline
- Ribbons : 0
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2018/06/28 23:45:24
(permalink)
Cordorb
ok, lets have a 3 position switch (master /slave / sync the other 2 fans to fan one )
if I was doing 24/7 folding or mining my fans would all be directly connected to a power supply
for now I am using an older version where I can at least double check things on my G19 LCD readout.
Saves having to shine a flash light into the case to see if all fans are going.
I'd love to be able to write the custom curve to the card and then just remove the software entirely.
|
ProudTiger
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2017/11/27 05:04:50
- Status: offline
- Ribbons : 0
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2019/01/13 04:18:16
(permalink)
Precision XOC is a garbage program,thank God I love my EVGA gtx 1070 sc but Precision XOC does not start up with windows 10 and it also doesn't save custom fan curves. Terrible program. MSI's Afterburner is much better ,I love Precision XOC's interface but if it does not work ,it is pointless. Do not want to kill off my precious gpu.
post edited by ProudTiger - 2019/01/13 04:21:22
|
Cordorb
SSC Member
- Total Posts : 635
- Reward points : 0
- Joined: 2007/03/18 22:27:50
- Status: offline
- Ribbons : 2
Re: Precision xoc 6.27 has burned out my 3 1070's by stopping fans on driver crash and res
2019/01/14 20:13:37
(permalink)
drop back to 6.1.16 version and try .
I know that ALL version of nvidia drives are flawless and NO one would think about dropping back a version or two :-)
|