Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
My 1080Ti FTW3 fans are spinning 100% as I open Precision X 6.2.6. Also some overclock settings have been applied as the default profile, how do I reset the default profile? The fans could be related to that..
 Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Fans spin 100% when opening Precision X 6.2.6
2018/04/27 17:29:34
(permalink)
I believe this is related to the newest version. Go back to 6.2.3 to fix the issue. To reset all profiles to default goto C:\Program Files (x86)\EVGA\Precision XOC & delete all the files in the profiles folder.
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: Fans spin 100% when opening Precision X 6.2.6
2018/04/27 17:57:07
(permalink)
I see. Hopefully that will be fixed soon. The updates to Precision X are looking quite good.
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: Fans spin 100% when opening Precision X 6.2.6
2018/04/27 21:33:58
(permalink)
So is everyone experiencing this 100% fan thing with 6.2.6?
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Fans spin 100% when opening Precision X 6.2.6
2018/04/28 03:43:51
(permalink)
Graphite8five
So is everyone experiencing this 100% fan thing with 6.2.6?
I certainly am, along with the GPU fan not spinning up after PXOC loads with aggressive fan profile. I went back to 6.2.3.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Cordorb
SSC Member
- Total Posts : 635
- Reward points : 0
- Joined: 2007/03/18 22:27:50
- Status: offline
- Ribbons : 2
Re: Fans spin 100% when opening Precision X 6.2.6
2018/04/28 14:44:49
(permalink)
too bad that case cooling fans don't do the same thing :-) ( they stall out on low voltage )
This seems like a good control feature to have pumps and fans faster on start and fall back after the control system is operational. I like the feedback on boot that they are working.
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/11 01:09:48
(permalink)
Does anybody know if this has been fixed in version 6.2.7? Edit: Sorry I see in the release notes that it's been fixed.
post edited by Graphite8five - 2018/05/11 02:16:23
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
CriticalHit_NL
iCX Member
- Total Posts : 404
- Reward points : 0
- Joined: 2009/09/08 10:23:06
- Status: offline
- Ribbons : 17
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/11 03:59:29
(permalink)
Graphite8five
Does anybody know if this has been fixed in version 6.2.7?
Edit: Sorry I see in the release notes that it's been fixed.
It is indeed fixed in 6.2.7. I noticed the fan speed that was occurring during start-up was related to the maximum speed set in the current fan curve.
i7 3930K 4.4Ghz - EVGA 1080Ti FTW3 - 32GB Corsair Dominator DDR3-1866 - Asus Sabertooth X79 - Samsung 840 Pro 256GB - Samsung 860 Pro 2TB - 3x HGST 7K4000 Deskstar 4TB - 3x HGST Ultrastar He10 8TB - Corsair AX1200i - Asus PG279Q + BenQ BL2411 - Razer Viper Mini/SBF98 - Logitech Z906 & G35 - Windows 10 Professional
|
Cordorb
SSC Member
- Total Posts : 635
- Reward points : 0
- Joined: 2007/03/18 22:27:50
- Status: offline
- Ribbons : 2
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/11 17:49:04
(permalink)
at one time the EVGA CPU flow control software used the manual slider speed set speed for a few seconds on startup tell auto took over.
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/11 17:58:52
(permalink)
Isn't by default the GPU fan only supposed to spin at low speed when idling? I've installed version 6.2.7, the software is not open and all 3 fans are spinning at 600 rpm (desktop)...
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
CriticalHit_NL
iCX Member
- Total Posts : 404
- Reward points : 0
- Joined: 2009/09/08 10:23:06
- Status: offline
- Ribbons : 17
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/12 05:15:55
(permalink)
Graphite8five
Isn't by default the GPU fan only supposed to spin at low speed when idling? I've installed version 6.2.7, the software is not open and all 3 fans are spinning at 600 rpm (desktop)...
Depends on the model, vbios and temperature, but recent videocard generations have zero RPM modes where the fans don't spin if the temperature is below a certain threshold by default.
i7 3930K 4.4Ghz - EVGA 1080Ti FTW3 - 32GB Corsair Dominator DDR3-1866 - Asus Sabertooth X79 - Samsung 840 Pro 256GB - Samsung 860 Pro 2TB - 3x HGST 7K4000 Deskstar 4TB - 3x HGST Ultrastar He10 8TB - Corsair AX1200i - Asus PG279Q + BenQ BL2411 - Razer Viper Mini/SBF98 - Logitech Z906 & G35 - Windows 10 Professional
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/12 06:10:31
(permalink)
CriticalHit_NL
Graphite8five
Isn't by default the GPU fan only supposed to spin at low speed when idling? I've installed version 6.2.7, the software is not open and all 3 fans are spinning at 600 rpm (desktop)...
Depends on the model, vbios and temperature, but recent videocard generations have zero RPM modes where the fans don't spin if the temperature is below a certain threshold by default.
I got a response in the 1080 Ti forum section and that it's normal for all 3 fans to spin at around 600 rpm when using the slave Bios and when the PXOC software is not running. If using the master Bios just the GPU fan spins (software not running) and the other two kick in at a certain temperature. There is also a predefined fan curve that both the master and slave Bios will follow when the PXOC software is not running but I'm not sure what they look like.
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/12 06:57:19
(permalink)
Interesting, I did not think any of the fans spun upon startup under master bios until either heat or a fan curve profile kicked in from PXOC.
I know when I launch PXOC ( 6.2.7) all three fans show 0 rpm until my profile kicks in. However the GPU slider shows about half way when I first launch PXOC ( and shows 0 rpm) until fan profile kicks in.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
CriticalHit_NL
iCX Member
- Total Posts : 404
- Reward points : 0
- Joined: 2009/09/08 10:23:06
- Status: offline
- Ribbons : 17
Re: Fans spin 100% when opening Precision X 6.2.6
2018/05/12 16:20:54
(permalink)
Graphite8five
I got a response in the 1080 Ti forum section and that it's normal for all 3 fans to spin at around 600 rpm when using the slave Bios and when the PXOC software is not running. If using the master Bios just the GPU fan spins (software not running) and the other two kick in at a certain temperature. There is also a predefined fan curve that both the master and slave Bios will follow when the PXOC software is not running but I'm not sure what they look like.
Yeah the slave bios has an aggressive fan curve for better default cooling, because that vbios would be mainly used for overclocking purposes with even higher power draws. The master bios should have 0RPM at a certain temperature for all the fans, but I don't know the thresholds as I can hardly properly look at the videocard from my position. I just checked without Precision XOC running and none of the fans on the FTW3 are spinning. My videocard is also rather cold on idle and the case is well ventilated, it is currently around 30-35°C with 23,6°C ambient. Just like d.burnette says, all the fans should be able to spindown on master vbios.
i7 3930K 4.4Ghz - EVGA 1080Ti FTW3 - 32GB Corsair Dominator DDR3-1866 - Asus Sabertooth X79 - Samsung 840 Pro 256GB - Samsung 860 Pro 2TB - 3x HGST 7K4000 Deskstar 4TB - 3x HGST Ultrastar He10 8TB - Corsair AX1200i - Asus PG279Q + BenQ BL2411 - Razer Viper Mini/SBF98 - Logitech Z906 & G35 - Windows 10 Professional
|