Hi
 
First, sorry for my english
I have a problem to install windows 10 with usb key or booting with a ssd with w10 already installed
i tried ubuntu install but the install stop
tried many usb key, usb 3.0 and 2.0
check my RAM (ddr4 corsair vengence 3000mhz)
my CPU seems to be ok i7 8700
i tried with usb 2.0 port, usb 3.0, bracket usb 3.0
 
so when i want to boot or install i have this message
 
Recovery
 
Your PC/device needs to be repaires
The digital signature for this file couldn't be verify.......
Error code 0xc0000428
 
For the USB install i have no problem with an other computer
 
I already tested with one RAM, without graphic card, without optional USB (inside) only the mouse and keyboard are plugged
 
Change the date in the bios, only the error code changed
i did the update the latest bios.
tried diffent build of windows 10
 
 
i don t know what to do
 
 
thank you : )

Hi, nope, even without partition or when i unplugged all the hard drive and ssd, i tried only booting with the usb key i have the same issue

i did format my usb keys with diskpart but i forgot to try with media creation tool after, only with windows usb tools and rufus.
 
I gonna try this in few hours, thanks again :)

Disconnect all drives except the drive you intend to use for the system drive. The only thing I can suggest to you is to start the Windows 10 setup from the USB stick by settings your BIOs to boot from it. Once done then in the start up choose to delete the partition on the drive you wish to use for the system drive. There will be one or two small partitions on the same drive so delete those one at a time. These are Windows system file backups (hidden partitions). Now there should be no partitions of backups on the drive. Now choose to install Windows.

Hi, i have no partition i did a clean command with diskpart, on the usb key and the ssd, and i tried to boot only with the usb key with the w10 install i tried even when the hdd or ssd are unplugged
 
And i already tried to boot directly from the bios, same issue, make the usb or ssd on 1st boot too
The usb key start very well on an otther computer

No luck with the RAM on the good slot

ok its was one of the 2 RAM who was incriminate lol
 
i go back back the one who worked perfectly to get the install of w10 but i have the error code C one the motherboard, i m trying a clear cmos one more time

i seen what is the the C code error, but when i switch for the second bios i have no problem, new problem i can t see any sata im the bios in the second bios, i think its just a problem from the ddr4 changes slot
 
thank you for your help 

remisuxx
new problem i can t see any sata im the bios in the second bios

Odd. What bios version is it?

remisuxx
Hi sorry, i get a new ram, and finally i can install an OS, but the motherboard seems to work only with the second bios (v1.05), with the first bios (v1.08), no acces to the bios, black screen, cpu led red et mermory led too, and the fans turn and after show off over and over, what can i do ?
 
 
Thank you again 

https://forums.evga.com/FindPost/2796350