Berike
I just use it because I have 1080 Ti FTW3 and need all the fans to be sync, MSI Afterburner can only handle 1 fan.
 
Would be great to have CPU usage like % usage, Clock, not just temp.
 
Any news about this CPU support?

DeathSentinels
This version broke my temperature sensors for my memory and power, going back to the previous version fixed it.

1. EVGA 1080Ti FTW3 Power/Memory sensors not tracked by default in hardware monitor.
   This causes automatic fan control not to function and fans will not spin up.
2. Switching from GUI-skin stops automatic fan control from functioning.
   It will work again after opening the settings menu.
   
3. Not able to set minimum and maximum values for Hardware monitor in default skin.
   This makes "Play alarm sound when value is out of range" useless.
   
4. Reported GPU in main Precision XOC window is not white:
   
5. Kingpin skin is not updated to include or change the following:
   - Disabling the < > arrows at GPU/Precision Logo location. (unsure if intended to remove or not)
   
   - OC Scan button is missing on Kingpin skin. (instead accessible via < > buttons)
   - Kingpin skin settings do not contain "OSD" and "Monitoring" tabs. (instead uses old OSD settings menu)
6. Having a small width window of Hardware monitor open causes overlapping issues with sensor title texts and information:
   
7. Hardware monitor buttons GPU1, System and others are not displayed when Precision XOC is minimized OR clicking inside Hardware monitor window while Precision XOC is open.
   These buttons are missing in the above picture:
   
   It is expected these remain visible for easy user-interaction at all times independent of any window focus.
8. Hardware monitor window scrolls back to top when enabling OSD/Keyboard/Tray or removing sensors.
   This can be frustrating for end-users having to scroll continuously .

1. Minimizing LED Sync shows a small Windows Classic-themed window bar, if this bar is moved by the cursor and released, and it is attempted to re-open LED Sync, the window loses some of it's GUI elements and nothing inside can be clicked on. (neither it will close unless using taskmanager or disabling it inside Precision XOC)
   More info: https://forums.evga.com/FindPost/2729946
2. Launching Precision XOC while LED Sync is in the taskbar re-opens the LED Sync menu.
3. Pressing X in LED Sync now minimizes the menu to taskbar instead of closing it, this would be expected for the ' _ ' button. (icons have been changed to only minimize to tray)
4. The windows start-up task for LED Sync is not removed when the LED Sync window is closed via 'Close' in the right click context menu in taskbar, Precision XOC LED Sync button stays lit, start-up task will be removed after clicking LED Sync button in Precision XOC again.
5. Disabling OSD in games can cause some games to crash. (Update, see Edit note below this post)
   More info: https://forums.evga.com/FindPost/2713037
   
   - Tested in:
   GTA V
   FlatOut 4
   Life is Strange 1
   Life is Strange - Before the Storm
   Carmageddon: Max Damage
   Battlefield 1
   Crysis 1
   DiRT 2
   DiRT 3
   DiRT 4
   DiRT Rally
   DiRT Showdown
   Just Cause 2
   Just Cause 3
   Left 4 Dead 2
   Metro 2033
   Mirror's Edge Catalyst
   Need For Speed 4 - High Stakes (Road Challenge)
   Planet Coaster
   Red Faction Guerrilla
   Sniper Elite V2
   Wreckfest
   

1. Changing screenshot saving location tends to be problematic, causing first screenshot save to fail and no longer work after.
   More info: https://forums.evga.com/FindPost/2713037
2. PNG screenshot capture with Precision XOC shows image corruptions.
   More info: https://forums.evga.com/FindPost/2705146
3. Precision XOC crash when closing hardware monitor after fan speeds are changed.
4. Breathing mode for backplate LED 1080Ti FTW3. (using Appearance LED)
5. Pressing F1 on LED Sync window pops-up an error and launches Windows Help.
   More info: https://forums.evga.com/FindPost/2727988
   

rjohnson11
I'll forward this one (post 66) to EVGA

serge1940
I get an error every time I start up XOC. it says: Error CoInitializeEx [OK]
clicking OK closes the program... that's it. o.O

boatillo

InscrutableDespotism
Looks like Precision XOC still prevents windows shutdown, unless minimized/closed.

 
This is very annoying, makes me not want to even open the monitor some days; but its not a new issue!
 

daimos84
I really didn't like, how logo appears now at start(and start is very long - about 5-10secs)! Put it back, how it was - when precision loads at backyard, putting icon to tray...really annoying

This is also very obtrusive! I think my entire system (on an Optane pcie boot drive) loads faster than it takes for this obnoxious logo to go away.
 
Currently testing OSD customization, will revert to previous version unless this function cooperates.

CriticalHit_NL

uplink_svk
Hey there guys. Erm, is there any way to set OSD in default skin on this update? I had to switch to KingPin skin [which I don't like that much], in order to get back to OSD settings. Thank You! :)

OSD settings are now able to be set inside the Settings menu under the "OSD" and "Monitoring" tabs:

 
The only caveat I found with this is that you are not able to set minimum/maximum values for the alarm setting this way.
 
Edit:
 
Odd, I also don't see an option for changing the LCD Keyboard OSD font size in the new OSD settings menu.

Attached Image(s)

CriticalHit_NL

uplink_svk
Hey there sir CriticalHit_NL. Thank You for Your super faste reply!

Yup, found those, but I wonder about these...

The "select GPU statistics" option is missing :(. It reset my settings OSD-wise, so I had to re-set them again, and I'm only able to do via KingPin skin.

You can find these now in the Hardware monitor window, there have been 'OSD', 'KB LCD' and 'TRAY' buttons added there for each sensor.

 
Also at the top of the Hardware monitor window these buttons will be shown:

Via here you can open a dropdownmenu with sensors to add or remove.
Currently these buttons only show up if Precision XOC window is open and focused, or resizing the Hardware monitor window while Precision XOC is open.

CriticalHit_NL

mrwar
Guys, sorry if I missed it earlier in the post, but how do you change the OSD Show in tray icon INDIVIDUIAL COLOURS? I see an option that changes all of them together but you were able to change the colours individually in the previous versions... I had different colours for several tray icon monitors that I have memorized for ages.
Anyone found out where to set that?

Try switching to the Kingpin skin and change OSD settings from there as it still uses the old menu.