So it's kinda weird. I set the multiplier to manual and set it to 4.7ghz
leave voltages on auto.
 
Disabled all power saving settings and C-step
 
turbo and EIST enabled
HT on
 
in the Bios show the system running at 4.3ghz and in windows.
 
Not sure why it wont run at the specified 4.7ghz.
 
I also tried disabling Hyper Threading Same result.
 
Tried disabling EIST which turned turbo off and made the system run at 3.2ghz
 
 
How can run over 4.3ghz?
 
Also the
CORSAIR Dominator Platinum 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000) Memory Kit Model CMD16GX4M2B3000C15
 
XMP profile wont POST I get a 4C error
 
 
Thanks guys! please help me out.

Sajin
Set your avx ratio offset to 0.

set to 0 same result. still only running at 4.3ghz
 
I wonder why it wont post with the RAM's XMP profile either?
 
My X299 FTW runs XMP no problem same memory to?

I'll give that a try. What about the clock speed though, what else can I try? Manual vcore?

All The Cores are already set to 4.7

The specs read Max 4,6 when I went to buy it. Didn't specify Single core though

Yep, should have definitely went with the k version if you wanted to overclock.