Since I have mounted a new system to use for gaming, I was thinking in leaving my I7 3820 as a LanBox project.
To do so, I needed a smaller case.
This is where the ThermalTake Versa H15 entered.
It's a mATX case, that can support 240mm rad on the front side (if 5.25" bay is removed).
It's a very nice case for a small project such as mine.

To the Configs!
MB: Asus Rampage IV Gene
CPU: I7 3820
Mem: Corsair Vengeance PRO Red 1600 Mhz (4x4Gb)
PSU: EVGA 550w SuperNOVA G3
Sleeve Cables: Red Sleeved Cables from EVGA to G3 series;
Storage: 60Gb Sandisk SSD (I will be replacing this one with a RAID0 Samsung if it goes well).
Water Cooler: Corsair H100i V1
Custom PSU Shroud from Titan Case Labs (adapted with Dremel work)

Mods Rigs Page: https://www.modsrigs.com/detail.aspx?BuildID=36027
 

 

 

 

 
Next week I will be creating a new thread with my upcoming "Project Tesseract".

bcavnaugh
Nice, I still love Black and Red
Any plans on upgrading the Graphics Card?
PS Did you stop Folding or move over to Mining?

I will update GPU as well.
I was using an old 960 SSC before, but I selled it last week for a friend.

I did stop folding for a time (energy in Brazil is crazy expensive these last months).
Should be back folding soon if everything goes nice.

blamb83
Nice build! I really like the PSU shroud and the 2.5" bays. What are the power cables going over the AIO tubing on the right side? Can't see them with the side panel on so it's not really a big deal, just not my style.
On a side note, if you want an upgrade the Xeon e5-1620 and e5-1650 V1 or V2 can be found on ebay for reasonable prices and can be overclocked.
 
Good luck on your new project!

Oh sorry,
That's the old GPU Power Cable I didn't took out .
Will leave there for a future upgrade on the GPU.

Hey blamb83m thanks for the heads up on the Xeons. I will definitly look into those for a update. 

blamb83

PietroBR

blamb83
Nice build! I really like the PSU shroud and the 2.5" bays. What are the power cables going over the AIO tubing on the right side? Can't see them with the side panel on so it's not really a big deal, just not my style.
On a side note, if you want an upgrade the Xeon e5-1620 and e5-1650 V1 or V2 can be found on ebay for reasonable prices and can be overclocked.
 
Good luck on your new project!

Oh sorry,
That's the old GPU Power Cable I didn't took out .
Will leave there for a future upgrade on the GPU.

Hey blamb83m thanks for the heads up on the Xeons. I will definitly look into those for a update. 

No need to apologize, I thought that might be the case but wasn't sure. Makes a lot more sense now. Hope you can find a good gpu to put in there to make it a more balanced system. 
Also I think it's great that you were willing to sell your old gpu to a friend. I do as much of this as possible to help out friends. Last year alone I built and gave away 6 systems for friends and family from spare parts donated by a friend of mine.

Whoa man.
That's is really nice from your part.
I try love to build pc for my friends, and as much as I like to help them.
I have sold my 960SSC for something around $90,00. Mainly, this friend only plays LOL (he is using a first gen I3 on his computer, so even LOL was terrible to play with iGPU).
So far so good, he has been very happy about it.

The city I leave doesn't have this much spare pieces to do something like you do. But I would definitly do the same if possible.
Way to go man, thumbs up to you on this  

Nice and clean sweet wire management. +1 

 
Looks great.

+1 on a nice build...  Red & black color combo is still my favorite...

Always nice to have a few extra GPU's laying around...

PietroBR

bdary
Always nice to have a few extra GPU's laying around...

Indeed.
Specially for RMA purposes (if, like me, you don't have the cross ship RMA avaible to go).

I keep a cheap extra GPU lying around just in case. Like when you need to send your video card to EVGA for stepup purposes.