Nice Build

Very nice build. I gave you a +1 on your mods rigs.

 
Looks really cool.      

 
 
Going to be hardlining this soon, I'll post pics when it shows up and gets done, or progress of it. (EK Cryofuel clear until primochill vue is readily available in the market)
 
This is how it sits for now
 

 
happy building guys 

Lovin' it!!

Very first bend, not too shabby. (This is my first time doing rigid)

 
Lets tear this thing apart...
 

 
 
.. Drain port\tubing\plug\whichever
 

 
CPU Block re-installed after flush, some more fittings done\o-ringed + put in
 

 
Coming along...
 

 
 
Lets get that last tube in, and clean up that inlet port to radiator.. 
 

 
LEAK TEST TIME!

 
 
 
.... Now that's a tight fitment, holy... Not even enough room for a hair strain.
 

 
 
END PROJECT; 
 

 
 
 
 
 
and you may be a redneck if... ( only got 3 bends out of this old 90s heatgun, had to buy a new)

Alrighty, time to add onto this build, ordered this today; 
 

 
will post pictures sometime next week of the build having a waterblock added to the GPU and a 280mm radiator up top.
 
stay tuned! :)

 
the goodies
 
flushed, taking apart some things, 280mm rad put in the top of the case

 
gpu block installed and put in
 

 
spent a long while trying to figure out how I'm going to do this bend from rad port to rad port;
 


 
 
 
some tubes bent and put in; 

 
trying to sketch up something for that rad port to rad port

 

 
not pretty but it works and it was a hell of a bend, spent like 2 hours on this tube :\
 
casualties; 
 
 
 
Got her all nice and set up, flushed the loop about 3 times... went to go fill it with EK Cryofuel Clear and I got greeted with this.
 

 
I flushed about 5 gallons of distilled water through the loop after this fiasco, I still don't know what happened or how. This is how it's looking right now, not good but much better then that crap that was in there
 
 

 
 
I'm going to have to disassemble this entire loop because of that coolant. It still has powdery debris stuck in my tube, and I can't imagine how bad the fin stacks are in the waterblocks.
 
 
Will replace it with koolance 702 clear.
 
 
30 minutes of heaven benchmark;

 
peaked 35c, it idles around 24c
cpu is 30c-50c
 
 
 

Wow, that would be very unfortunate. I no longer use coolant and just went with a silver kill coil and distilled water.