I turn on folding and go to sleep like I typically do but this time I do my big boys. I have 1050 to running all time doing fine. I"m not sure my drivers are bad on my 1070 or not on the correct one. but every time turn on the computer shows nothing no progress and don't see anything in the logs.

it may be drivers or you simply haven't slotted in the new GPU into the client.

Advance Control -> Configure -> Slots -> Add/Remove/Edit

t: 0x00000006868b340358ed41d87281eb8e
20:41:35:WU00:FS03:0xa7:Digital signatures verified
20:41:35:WU00:FS03:0xa7:Calling: mdrun -cpo frame6.cpt -s frame6.tpr -x frame6.xtc -e frame6.edr -cpi frame6.cpt -cpt 15 -nt 6
20:41:35:WU00:FS03:0xa7:Steps: first=3000000 total=500000
20:41:35:WU01:FS01:0xa7:Completed 53281 out of 250000 steps (21%)
20:41:35:WU00:FS03:0xa7:Completed 233761 out of 500000 steps (46%)
20:41:56:WU02:FS00:0x21:ERROR:Guru Meditation #0.3153f69ba50559 (7.7) '02/01/stepsDone'
20:41:56:WU02:FS00:0x21:WARNING:Unexpected exit() call
20:41:56:WU02:FS00:0x21:WARNING:Unexpected exit from science code
20:41:56:WU02:FS00:0x21:Saving result file logfile_01.txt
20:41:56:WU02:FS00:0x21:Saving result file checkpointState.xml
20:41:59:WU00:FS03:0xa7:Completed 235000 out of 500000 steps (47%)
20:42:01:WU02:FS00:0x21:Saving result file checkpt.crc
20:42:01:WU02:FS00:0x21:Saving result file log.txt
20:42:01:WU02:FS00:0x21:Saving result file positions.xtc
20:42:02:WU02:FS00:0x21:WARNING:While cleaning up: Failed to remove directory '01': boost::filesystem::remove: The process cannot access the file because it is being used by another process: "01\stepsDone"
20:42:02:WU02:FS00:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
20:42:02:WARNING:WU02:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
20:42:02:WU02:FS00:Sending unit results: id:02 state:SEND error:FAULTY project:10496 run:68 clone:47 gen:85 core:0x21 unit:0x0000006d8ca304f5588968f7aa79c08b
20:42:02:WU02:FS00:Uploading 17.13MiB to 140.163.4.245
20:42:02:WU02:FS00:Connecting to 140.163.4.245:8080
20:42:03:WU03:FS00:Connecting to 171.67.108.45:80
20:42:03:WU03:FS00:Assigned to work server 140.163.4.245
20:42:03:WU03:FS00:Requesting new work unit for slot 00: READY gpu:1:GP104 [GeForce GTX 1070] 6463 from 140.163.4.245
20:42:03:WU03:FS00:Connecting to 140.163.4.245:8080
20:42:04:WU03:FS00:Downloading 14.48MiB
20:42:07:WU03:FS00:Download complete
20:42:07:WU03:FS00:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:10496 run:56 clone:66 gen:107 core:0x21 unit:0x000000848ca304f5588965dbc322d4c4
20:42:07:WU03:FS00:Starting
20:42:07:WU03:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Jeremy/AppData/Roaming/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 03 -suffix 01 -version 704 -lifeline 11960 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
20:42:07:WU03:FS00:Started FahCore on PID 2936
20:42:07:WU03:FS00:Core PID:2128
20:42:07:WU03:FS00:FahCore 0x21 started
20:42:07:WU03:FS00:0x21:*********************** Log Started 2017-08-12T20:42:07Z ***********************
20:42:07:WU03:FS00:0x21:Project: 10496 (Run 56, Clone 66, Gen 107)
20:42:07:WU03:FS00:0x21:Unit: 0x000000848ca304f5588965dbc322d4c4
20:42:07:WU03:FS00:0x21:CPU: 0x00000000000000000000000000000000
20:42:07:WU03:FS00:0x21:Machine: 0
20:42:07:WU03:FS00:0x21:Reading tar file core.xml
20:42:07:WU03:FS00:0x21:Reading tar file system.xml
20:42:08:WU02:FS00:Upload 52.18%

This was after I remove and add so not to sure if this driver issue. I haven't had any issue or known issues with the GPU

Seem that when I left my computer on it restarted I'll have to check the logs when I get home. What are the current drivers that are known to work on 1070?

373.06 is still the Best Driver for any Non 1080 Ti Card and for the 1080 Ti Card 378.92 run best ATM.

Woke up with this error this morning. I'll have to check my windows files and see what cause it but looking up error code not to sure. only change i did was change my drivers to 372.90 don't know if i had a update from windows i'll have to check that as well.

http://www.nvidia.com/download/driverResults.aspx/107566/en-us
 
I went to above website to download the drivers.
I didn't use ddu.
I just download the above link and run no custom settings did standard download.

I'll check my folding client log when I get home.
I'll double check make sure windows 10 is blocked. My antivirus turns it off by default but I'll double check that. I'll give you a update when i have more information

Ran into another error. I did a fresh install and this what I woke up too later

Check if any of your security software auto scanned before / during that crash
 
Another issue could be some program or Windows automatically updating
 
Check PC's CPU setup - Folding does not benefit from OC the CPU - I'm guessing you know CPU Folding is not efficient Watt/PPD
 
If none of the above --> dial back OC / settings on your GPU(s)

Cool GTX
Check if any of your security software auto scanned before / during that crash
 
Another issue could be some program or Windows automatically updating
 
Check PC's CPU setup - Folding does not benefit from OC the CPU - I'm guessing you know CPU Folding is not efficient Watt/PPD
 
If none of the above --> dial back OC / settings on your GPU(s)

Chris21010
What sucks about that one is the F@H client will not resume the crashed slot until you click that close program button.

 So I did close it just wanted to show the error. after closing it and so on I let it run for about 24HRs + and haven't had any issues. wonder if it was just something random.

OK, I got one yesterday and this is what it looks like on Windows 7:
 
20:14:41:WU01:FS01:0x21:Completed 850000 out of 5000000 steps (17%)
20:14:47:WARNING:WU01:FS01:FahCore returned an unknown error code which probably indicates that it crashed
20:14:47:WARNING:WU01:FS01:FahCore returned: UNKNOWN_ENUM (127 = 0x7f)
20:14:47:WU01:FS01:Starting
20:14:47:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/George/AppData/Roaming/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 1052 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
20:14:47:WU01:FS01:Started FahCore on PID 3608
20:14:47:WU01:FS01:Core PID:5788
20:14:47:WU01:FS01:FahCore 0x21 started
20:14:48:WU01:FS01:0x21:*********************** Log Started 2017-09-07T20:14:47Z ***********************
20:14:48:WU01:FS01:0x21:Project: 11409 (Run 244, Clone 2, Gen 61)
20:14:48:WU01:FS01:0x21:Unit: 0x000000468ca304e9597784274617af22
20:14:48:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
20:14:48:WU01:FS01:0x21:Machine: 1
20:14:48:WU01:FS01:0x21:Digital signatures verified
20:14:48:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
20:14:48:WU01:FS01:0x21:Version 0.0.18
20:14:48:WU01:FS01:0x21:  Found a checkpoint file
20:14:52:WU01:FS01:0x21:Completed 750000 out of 5000000 steps (15%)
20:14:52:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
20:15:36:WU02:FS02:0x21:Completed 800000 out of 5000000 steps (16%)
 
Look at line #2 to see where it probably crashed. Yesterday it also gave me 85 nVidia errors too in my Event Viewer.