EVGA

EVGA Precision XOC 6.1.12

Page: < 123 > Showing page 2 of 3
Author
Post
Essentials Only Full Version
JosephL
EVGA Alumni
  • Total Posts : 662
  • Reward points : 0
  • Joined: 2016/06/12 10:33:58
  • Status: offline
  • Ribbons : 2
Re: EVGA Precision XOC 6.1.12 2017/07/26 18:41:10 (permalink)
I have seen a few reports on here of Precision XOC 6.1.12 for FTW3 owners. My apologies to anyone experiencing this issue.
 
I have reported this to the appropriate team for further attention. In the meantime, the previous version 6.1.11 is not experiencing this so I do recommend rolling back if you have an FTW3.

If you have a moment, please rate my service. We appreciate the feedback!
#31
RadioActiveLobster
New Member
  • Total Posts : 47
  • Reward points : 0
  • Joined: 2017/03/27 11:31:37
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision XOC 6.1.12 2017/07/26 19:05:11 (permalink)
EVGATech_JosephL
I have seen a few reports on here of Precision XOC 6.1.12 for FTW3 owners. My apologies to anyone experiencing this issue.
 
I have reported this to the appropriate team for further attention. In the meantime, the previous version 6.1.11 is not experiencing this so I do recommend rolling back if you have an FTW3.


You mean the version with the broken memory fan control and OSD?
 
6.1.6 is the last version that has actually worked for me. That's the one I recommend at the moment.

Ryzen 3900x - ASUS x570 Crosshair VIII Hero - Noctua NH-U12A - CaseLabs BH8
32GB G.Skill DDR4 3600 - EVGA 1080Ti FTW3 - EVGA SuperNova 750 G5
1TB NVMe OS Drive, 256GB SSD, 960GB SSD, 1 TB NVMe, 2 TB SSD
1 ACER 100Hz G-Sync z35p 3440x1440p - 1 ACER 144Hz G-Sync XB270HU 2560x1440p - 1x BenQ 60Hz GW2765 2560x1440p
Corsair K95 RGB Cherry MX Browns - Corsair Scimitar RGB
#32
Dragfox
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2016/08/29 00:38:09
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/26 22:41:55 (permalink)
It crashes right after it starts. with my 1080ti FTW3
#33
StonedApe
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2017/07/17 14:09:11
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/26 22:57:02 (permalink)
Installed 6.1.12 and it crashes right after launch. Actually it never launches, I do see it in the bottom right (in the taskbar) as if it launched minimized but once I click on it the icon disappears..
 
Going back to 6.1.11
#34
BlueWAX
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2017/07/26 19:19:35
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/26 23:17:13 (permalink)
Yep I got 1080Ti FTW3 had to use 6.1.11 instead 6.1.12 was crashing within seconds of starting up. 
#35
jonym10
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2015/05/31 17:40:17
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 00:31:34 (permalink)
BlueWAX
Yep I got 1080Ti FTW3 had to use 6.1.11 instead 6.1.12 was crashing within seconds of starting up. 


Exact same issue with same card, reverting.
#36
bguerra
New Member
  • Total Posts : 19
  • Reward points : 0
  • Joined: 2017/06/12 21:08:40
  • Location: Saudi Arabia (from Portugal)
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 01:39:44 (permalink)
I also downloaded the latest version, but due to the comments i will not install it until EVGA say something about it! 

ROG Maximus Formula VIII | 6700k 4.5 OC | EVGA Hybrid  1080Ti FTW3 | Corsair AX860i | 32GB Corsair RAM DDR4 | 960 pro m.2 | 850 Evo | H110i GTX | Win 10 64-bit Home Ed | 388.43 | Precision XOC 6.2.3
 
 
#37
iBike
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2017/07/17 10:43:42
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 02:36:45 (permalink)
This version can support 6 GPU yet ?
 
#38
Blackshadow007
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/08/29 22:39:26
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 03:07:03 (permalink)
RadioActiveLobster
EVGATech_JosephL
I have seen a few reports on here of Precision XOC 6.1.12 for FTW3 owners. My apologies to anyone experiencing this issue.
 
I have reported this to the appropriate team for further attention. In the meantime, the previous version 6.1.11 is not experiencing this so I do recommend rolling back if you have an FTW3.


You mean the version with the broken memory fan control and OSD?
 
6.1.6 is the last version that has actually worked for me. That's the one I recommend at the moment.


No i don't think OSD is broken in 6.1.11  , its working fine for me in game which it supports , i only noticed that PUBG AND RAINBOW SIX SIEGE game don't show OSD , all other i tested do show as it meant to be for me [ BF1 , MAFIA 3 , PARAGON ]  . Memory slider bug yes but you need to do click on that " M " once when you start your PC then until PC completely shut down it works , actually fan is doing its work only thing happening that result not being displayed to that slider .
#39
Blackshadow007
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/08/29 22:39:26
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 03:08:42 (permalink)
StonedApe
Installed 6.1.12 and it crashes right after launch. Actually it never launches, I do see it in the bottom right (in the taskbar) as if it launched minimized but once I click on it the icon disappears..
 
Going back to 6.1.11




Dragfox
It crashes right after it starts. with my 1080ti FTW3


 
Yes 6.1.12 Version instantly crashes . Now i see i am not alone in the boat many others do too .. so far reverted back to 6.1.11 , Hope latest version fixed asap .
 
 
#40
chenzhuops2
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2017/07/09 06:46:31
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 05:46:06 (permalink)
yeah 6.1.12 version is bad software! 
 
#41
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: EVGA Precision XOC 6.1.12 2017/07/27 09:10:03 (permalink)
This will be fixed today, sorry for the issue.


#42
RayAlpha
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2017/07/27 09:07:55
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 09:15:34 (permalink)
EVGA_JacobFThis will be fixed today, sorry for the issue.

 
 So happy with my new FTW3!
Nice Support. 
 

CPU: Ryzen 5 1600X MB: Asus ROG Strix B350-F Gaming RAM: 16GB (2x 8192MB) Corsair Vengeance LPX LP DDR4-3200 DIMM CL16-18-18-36 NT: 500 Watt be quiet! Pure Power 10 CM Modular 80+ Silver SSD: Samsung 850 Pro 256GB GPU: EVGA GeForce GTX 1080TI FTW3 Monitor: Asus MG278Q 27" WQHD OS: Win 10 Home 64bit
#43
machisman
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2017/06/17 20:22:18
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 09:15:42 (permalink)
Useless software.. you release a software which does not work well with recent high end GPU. That is completely fine, i assumed other software like afterburner will work with it, but looks like the asynchronous fan does not want to show up in afterburner.
EVGA either release a good software or make GPU's which can work with other softwares. 
 
Guess software is not your forte and please release a patch so that the fans get detected in other softwares.
#44
cmp2993
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2017/07/26 23:13:19
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 09:59:32 (permalink)
EVGA_JacobF
This will be fixed today, sorry for the issue.


I have the same issue as everyone else here. Got my new 1080 Ti FTW3 and Precision XOC crashes shortly after startup with 6.1.12. Installed 6.1.11 and it runs fine. Can you please notify us here when it's fixed and live on the download page?
#45
HotIce
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2017/07/07 09:30:38
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 10:07:18 (permalink)
EVGA_JacobF
This will be fixed today, sorry for the issue.


That's a super fast turnaround. Thank you.
#46
EVGA_JacobF
EVGA Alumni
  • Total Posts : 16946
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: EVGA Precision XOC 6.1.12 2017/07/27 10:44:47 (permalink)
6.1.13 is live now which has the problem fixed.


#47
CriticalHit_NL
iCX Member
  • Total Posts : 404
  • Reward points : 0
  • Joined: 2009/09/08 10:23:06
  • Status: offline
  • Ribbons : 17
Re: EVGA Precision XOC 6.1.12 2017/07/27 10:54:55 (permalink)
EVGA_JacobF
6.1.13 is live now which has the problem fixed.

Thank you, will try it out soon. 
machisman
Useless software.. you release a software which does not work well with recent high end GPU. That is completely fine, i assumed other software like afterburner will work with it, but looks like the asynchronous fan does not want to show up in afterburner.
EVGA either release a good software or make GPU's which can work with other softwares. 
 
Guess software is not your forte and please release a patch so that the fans get detected in other softwares.

The problem is that the iCX videocards use multiple fan headers, other GPU software is designed to only be able to detect and control one fan header.
This is a problem other software developers will have to fix, I think afterburner already supports reading out some sensors.
 
EVGA here is just a little bit ahead of the competition with their technology and cooling implementation, but being an early-adopter you'll have to accept the chance of having some early issues.
For me the rest of Precision XOC runs quite well and I don't really have big issues with it.
 
Sure the OSD side isn't that solid, but OSD software has always been tricky to do well and even then they can cause a lot of conflicts and other problems such as lower performance or crashing applications.
I wouldn't burn down XOC based on OSD issues.
 
But yes maybe some extra testing wouldn't have hurt, I mean this crash issue was pretty obvious and should be easy to find out.
post edited by CriticalHit_NL - 2017/07/27 10:57:21

i7 3930K 4.4Ghz - EVGA 1080Ti FTW3 - 32GB Corsair Dominator DDR3-1866 - Asus Sabertooth X79 - Samsung 840 Pro 256GB - Samsung 860 Pro 2TB - 3x HGST 7K4000 Deskstar 4TB - 3x HGST Ultrastar He10 8TB - Corsair AX1200i - Asus PG279Q + BenQ BL2411 - Razer Viper Mini/SBF98 - Logitech Z906 & G35 - Windows 10 Professional

#48
pstlouis
iCX Member
  • Total Posts : 322
  • Reward points : 0
  • Joined: 2008/10/24 16:19:19
  • Location: Montreal
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 11:15:24 (permalink)
CriticalHit_NL
EVGA_JacobF
6.1.13 is live now which has the problem fixed.

Thank you, will try it out soon. 
machisman
Useless software.. you release a software which does not work well with recent high end GPU. That is completely fine, i assumed other software like afterburner will work with it, but looks like the asynchronous fan does not want to show up in afterburner.
EVGA either release a good software or make GPU's which can work with other softwares. 
 
Guess software is not your forte and please release a patch so that the fans get detected in other softwares.

The problem is that the iCX videocards use multiple fan headers, other GPU software is designed to only be able to detect and control one fan header.
This is a problem other software developers will have to fix, I think afterburner already supports reading out some sensors.
 
EVGA here is just a little bit ahead of the competition with their technology and cooling implementation, but being an early-adopter you'll have to accept the chance of having some early issues.
For me the rest of Precision XOC runs quite well and I don't really have big issues with it.
 
Sure the OSD side isn't that solid, but OSD software has always been tricky to do well and even then they can cause a lot of conflicts and other problems such as lower performance or crashing applications.
I wouldn't burn down XOC based on OSD issues.
 
But yes maybe some extra testing wouldn't have hurt, I mean this crash issue was pretty obvious and should be easy to find out.


The dev of Afterburner said that he will never had the option for multiple custom fan curve. Agreed with your comment. +1 
post edited by pstlouis - 2017/07/27 11:20:00
#49
CriticalHit_NL
iCX Member
  • Total Posts : 404
  • Reward points : 0
  • Joined: 2009/09/08 10:23:06
  • Status: offline
  • Ribbons : 17
Re: EVGA Precision XOC 6.1.12 2017/07/27 14:25:10 (permalink)
Precision XOC 6.1.13 is running good so far with my 1080Ti FTW3 on Windows 7! 
No firmware update was offered like as with 6.1.12, though this may be normal, a GPU may not need updates every time.
pstlouis
The dev of Afterburner said that he will never had the option for multiple custom fan curve. Agreed with your comment. +1 

He might not do it specifically for the iCX cards, though nobody knows what other manufacturers are going to do now seeing EVGA's new technology.
I'm sure they want to catch-up and release similar things in the future for greater control.
 
Then Afterburner will be required to work with that too, however I'm not so sure about how hard such thing is to implement and if it will work similar to what EVGA does.
 
The more you support the better it is for the end-user.
 
Edit:
The behaviour of the backplate LED as described here is still relevant in Precision XOC 6.1.13:
https://forums.evga.com/FindPost/2698453
I'm not sure if this is expected to work like this.
post edited by CriticalHit_NL - 2017/07/27 14:46:55

i7 3930K 4.4Ghz - EVGA 1080Ti FTW3 - 32GB Corsair Dominator DDR3-1866 - Asus Sabertooth X79 - Samsung 840 Pro 256GB - Samsung 860 Pro 2TB - 3x HGST 7K4000 Deskstar 4TB - 3x HGST Ultrastar He10 8TB - Corsair AX1200i - Asus PG279Q + BenQ BL2411 - Razer Viper Mini/SBF98 - Logitech Z906 & G35 - Windows 10 Professional

#50
E1115CEA5C044F6
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2017/06/18 09:54:24
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision XOC 6.1.12 2017/07/27 15:41:24 (permalink)
Am I the only one still dealing with crashes running 6.1.13?
 
About to try a clean uninstall..
 
Edit: Issue seems to be caused by configuring a custom VF curve. Anyone care to test?
post edited by klatoszek - 2017/07/27 16:50:10
#51
d.burnette
CLASSIFIED ULTRA Member
  • Total Posts : 5496
  • Reward points : 0
  • Joined: 2007/03/08 13:19:32
  • Status: offline
  • Ribbons : 17
Re: EVGA Precision XOC 6.1.12 2017/07/27 16:30:43 (permalink)
EVGA_JacobF
6.1.13 is live now which has the problem fixed.



 
Looking good, thank you for the quick fix!!
 

Don 
 
 
EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
 
 
 
 
 
 
 
 
 
 
#52
AdamInk
Superclocked Member
  • Total Posts : 240
  • Reward points : 0
  • Joined: 2016/10/02 04:23:53
  • Location: Hungary
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision XOC 6.1.12 2017/07/27 21:49:09 (permalink)
6.1.13 is running good without crashes ?
Has anyone tested it ?


 

#53
Blackshadow007
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/08/29 22:39:26
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 21:55:22 (permalink)
6.1.13 Version works well and no crash . Everything fine so far . So guys who faced crash for 6.1.12 try new 6.1.13 :)
#54
Blackshadow007
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/08/29 22:39:26
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/27 21:56:44 (permalink)
AdamInk
6.1.13 is running good without crashes ?
Has anyone tested it ?

Yes its running without crash and no issue so far .
#55
AdamInk
Superclocked Member
  • Total Posts : 240
  • Reward points : 0
  • Joined: 2016/10/02 04:23:53
  • Location: Hungary
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision XOC 6.1.12 2017/07/27 21:57:01 (permalink)
Blackshadow007
6.1.13 Version works well and no crash . Everything fine so far . So guys who faced crash for 6.1.12 try new 6.1.13 :)


Thank you, then i give a try for it :)


 

#56
PhantomApollyon
Superclocked Member
  • Total Posts : 212
  • Reward points : 0
  • Joined: 2010/01/27 23:49:20
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision XOC 6.1.12 2017/07/28 05:44:13 (permalink)
No problems with 6.1.13 here either so far.

ASUS Maximus z690 Hero // i9 12900K // 4090 FE // 32GB 6000Mhz DDR5 // EVGA 1600 T2
#57
iBike
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2017/07/17 10:43:42
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/28 05:58:43 (permalink)
When Precision XOC will support more than 4 GPU ?
Please
#58
bguerra
New Member
  • Total Posts : 19
  • Reward points : 0
  • Joined: 2017/06/12 21:08:40
  • Location: Saudi Arabia (from Portugal)
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision XOC 6.1.12 2017/07/28 10:06:48 (permalink)
No problems so far for me as well, FTW3!

ROG Maximus Formula VIII | 6700k 4.5 OC | EVGA Hybrid  1080Ti FTW3 | Corsair AX860i | 32GB Corsair RAM DDR4 | 960 pro m.2 | 850 Evo | H110i GTX | Win 10 64-bit Home Ed | 388.43 | Precision XOC 6.2.3
 
 
#59
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA Precision XOC 6.1.12 2017/07/28 10:18:59 (permalink)
iBike
This version can support 6 GPU yet ?
 

 
iBike
When Precision XOC will support more than 4 GPU ?
Please


Most likely Never.

Associate Code: 9E88QK5L7811G3H


 
#60
Page: < 123 > Showing page 2 of 3
Jump to:
  • Back to Mobile