EVGA

[RESOLVED: LED installed incorrectly]Just got my FTW3...& the backplate LED doesn't work.

Author
Post
Essentials Only Full Version
Soulshot96
New Member
  • Total Posts : 63
  • Reward points : 0
  • Joined: 2015/04/04 09:46:29
  • Location: USA
  • Status: offline
  • Ribbons : 0
2017/05/11 08:19:15 (permalink)
ISSUE IS RESOLVED. The backplate LED was installed incorrectly from the factory. I took the backplate off to fix it. 
 
Got my card, installed it, DDU's my old drivers, installed newest ones. Installed XOC. Attempted to change LED settings to play around with colors. Backplate LED will not function at all. I tried restarting. I tried a system shutdown and restart. Still doesn't work.
 
It's not a big thing sure. But I waited over a month for this damned card, and out of the box stuff doesn't work?
 
Not too happy right now...
post edited by Soulshot96 - 2017/05/11 09:56:33

Main Rig: MONOLITH MK2
 
OS-Windows 10 Home 64 bit
CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
MOBO-ASUS MAXIMUS XI CODE
RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
COOLING-Full custom loop
BOOT DRIVE-Samsung 970 EVO 500GB NVMe
STORAGE DRIVE 1-WD Black 6TB 7200rpm
STORAGE DRIVE 2-WD Black 2TB 7200rpm
STORAGE DRIVE 3-Sandisk 240GB SSD
PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
CASE-Corsair 500D SE
MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


 
 
 
#1

18 Replies Related Threads
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 08:20:38 (permalink)
    If anyone has any insight on this I'd appreciate it. Hopefully its not hardware related but who knows. 

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #2
    arestavo
    CLASSIFIED ULTRA Member
    • Total Posts : 6916
    • Reward points : 0
    • Joined: 2008/02/06 06:58:57
    • Location: Through the Scary Door
    • Status: offline
    • Ribbons : 76
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 08:30:50 (permalink)
    There's always EVGA's 24/7 tech support (for North America at least): https://www.evga.com/about/contactus/ 
    #3
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 08:32:24 (permalink)
    What Version of XOC did you install?

    Associate Code: 9E88QK5L7811G3H


     
    #4
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 08:43:55 (permalink)
    bcavnaugh
    What Version of XOC did you install?




    The latest. 6.1.6. 
     
     

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #5
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 08:46:47 (permalink)
    Too add to this. I just tried the master and slave bios independently. I also removed the card and checked all the connections. They appear to all be fine, but I can't really see the backplate LED one, as it's almost completely covered by the backplate. But while I was looking, I noticed that there is a scratch in my backplate, as well as a few X's scratched over my serial number/barcode sticker, as well as a small chunk missing from the EVGA warranty sticker over one of the backplate screws...what the hell. 
     

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #6
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 08:54:30 (permalink)
    Soulshot96
    Too add to this. I just tried the master and slave bios independently. I also removed the card and checked all the connections. They appear to all be fine, but I can't really see the backplate LED one, as it's almost completely covered by the backplate. But while I was looking, I noticed that there is a scratch in my backplate, as well as a few X's scratched over my serial number/barcode sticker, as well as a small chunk missing from the EVGA warranty sticker over one of the backplate screws...what the hell. 
     


    You could have cased this when you installed the card, unless you took a photo of your card while it was still in the box.
    Did you not inspect the card before you installed it?
    Where did you Buy your card from?

    Associate Code: 9E88QK5L7811G3H


     
    #7
    Ignotum
    New Member
    • Total Posts : 99
    • Reward points : 0
    • Joined: 2013/06/14 09:16:30
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:02:00 (permalink)
    Share some media, like photo or video. Is 2017 man

    MB: Gigabyte Z370 Aorus Gaming 7 // CPU: i7 8700K // SSD: Samsung 840 Pro 256GB + ​WD SSD 512GB PCIe M.2 Black + HDD WD CG 2 TB // RAM: Corsair Vengeance RGB 16GB (2 x 8GB) DDR4 3000MHZ // GPU: EVGA GTX 1080Ti SC2 GAMING // Monitor: Dell S2716DG G-Sync 144Hz // PSU: Corsair 1050w 80Plus Gold HX1050 // CASE: Thermaltake View 71 TG // K&M: SteelSeries Merc Stealth & Razer Mamba Chroma Tournament Edition + Steelseries Arctis 7 // SO Windows 10 Pro
    #8
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:05:15 (permalink)
    bcavnaugh
    Soulshot96
    Too add to this. I just tried the master and slave bios independently. I also removed the card and checked all the connections. They appear to all be fine, but I can't really see the backplate LED one, as it's almost completely covered by the backplate. But while I was looking, I noticed that there is a scratch in my backplate, as well as a few X's scratched over my serial number/barcode sticker, as well as a small chunk missing from the EVGA warranty sticker over one of the backplate screws...what the hell. 
     


    You could have cased this when you installed the card, unless you took a photo of your card while it was still in the box.
    Did you not inspect the card before you installed it?
    Where did you Buy your card from?




    I know I didn't cause the ones on the sticker. Also, a EVGA rep says that is normal...so whatever. If it matters though, I got it from Newegg. 

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #9
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:08:26 (permalink)
    Ignotum
    Share some media, like photo or video. Is 2017 man




    The real issue here is the backplate LED, which simply doesn't work. I fail to see how pictures or videos of that are going to contribute in any way. 
     
    Regardless, I have talked to EVGA...they have no idea why this might be happening, but have said that I am okay to go ahead and remove the backplate to check the LED connection. So that's what I am going to do. I've pretty much exhausted my options at this point anyway. I've reinstalled XOC 3 times now, even deleting the left over folders and such it leaves behind. 

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #10
    DukeCLR
    iCX Member
    • Total Posts : 254
    • Reward points : 0
    • Joined: 2007/01/07 06:04:28
    • Location: All over.
    • Status: offline
    • Ribbons : 1
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:09:03 (permalink)
    Soulshot96
    bcavnaugh
    Soulshot96
    Too add to this. I just tried the master and slave bios independently. I also removed the card and checked all the connections. They appear to all be fine, but I can't really see the backplate LED one, as it's almost completely covered by the backplate. But while I was looking, I noticed that there is a scratch in my backplate, as well as a few X's scratched over my serial number/barcode sticker, as well as a small chunk missing from the EVGA warranty sticker over one of the backplate screws...what the hell. 
     


    You could have cased this when you installed the card, unless you took a photo of your card while it was still in the box.
    Did you not inspect the card before you installed it?
    Where did you Buy your card from?




    I know I didn't cause the ones on the sticker. Also, a EVGA rep says that is normal...so whatever. If it matters though, I got it from Newegg. 




    I buy a lot of stuff from Newegg and I have had them send me open box items as new. A friend of mine got a laptop that had been used and returned, it turned out it was a lemon so I don't trust them. 

    PhanTeks Enthoo Evolv TGE
    Intel Core i7 8700k @ 5.0
    EVGA Z390 FTW
    EVGA GTX 3080 FTW3
    GSkill Ripjaws 16Gb
    EVGA CLC280
    PSU EVGA 850 T2


     
    #11
    DukeCLR
    iCX Member
    • Total Posts : 254
    • Reward points : 0
    • Joined: 2007/01/07 06:04:28
    • Location: All over.
    • Status: offline
    • Ribbons : 1
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:10:09 (permalink)
    Soulshot96
    Ignotum
    Share some media, like photo or video. Is 2017 man




    The real issue here is the backplate LED, which simply doesn't work. I fail to see how pictures or videos of that are going to contribute in any way. 
     
    Regardless, I have talked to EVGA...they have no idea why this might be happening, but have said that I am okay to go ahead and remove the backplate to check the LED connection. So that's what I am going to do. I've pretty much exhausted my options at this point anyway. I've reinstalled XOC 3 times now, even deleting the left over folders and such it leaves behind. 




    It would be interesting to see if it works in another rig. 

    PhanTeks Enthoo Evolv TGE
    Intel Core i7 8700k @ 5.0
    EVGA Z390 FTW
    EVGA GTX 3080 FTW3
    GSkill Ripjaws 16Gb
    EVGA CLC280
    PSU EVGA 850 T2


     
    #12
    EVGA_JacobF
    EVGA Alumni
    • Total Posts : 16946
    • Reward points : 0
    • Joined: 2006/01/17 12:10:20
    • Location: Brea, CA
    • Status: offline
    • Ribbons : 26
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:15:03 (permalink)
    Can you take a screenshot of the LED section in PXOC?


    #13
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:34:14 (permalink)
    EVGA_JacobF
    Can you take a screenshot of the LED section in PXOC?




    Thanks for the reply, but there's no need. I took it out, removed the backplate over the LED, and saw that the cable was bent over itself, and smashed into the foam pretty good. Not sure if that was the issue OR it not being seated far enough into the plug was, but it works now. I am going to say this here and in aN email to you guys later though, that I had to break the EVGA sticker on the backplate to do this, and your tech support rep said I was perfectly ok in doing that. 
     
    Also, maybe you guys should like, test these LED's before you send em out? As small of a issue as this is, it's not cool to get your brand new $779 GPU and have to immediately take it apart. 
    post edited by Soulshot96 - 2017/05/11 09:38:36

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #14
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:37:56 (permalink)
    DukeCLR
    Soulshot96
    bcavnaugh
    Soulshot96
    Too add to this. I just tried the master and slave bios independently. I also removed the card and checked all the connections. They appear to all be fine, but I can't really see the backplate LED one, as it's almost completely covered by the backplate. But while I was looking, I noticed that there is a scratch in my backplate, as well as a few X's scratched over my serial number/barcode sticker, as well as a small chunk missing from the EVGA warranty sticker over one of the backplate screws...what the hell. 
     


    You could have cased this when you installed the card, unless you took a photo of your card while it was still in the box.
    Did you not inspect the card before you installed it?
    Where did you Buy your card from?




    I know I didn't cause the ones on the sticker. Also, a EVGA rep says that is normal...so whatever. If it matters though, I got it from Newegg. 




    I buy a lot of stuff from Newegg and I have had them send me open box items as new. A friend of mine got a laptop that had been used and returned, it turned out it was a lemon so I don't trust them. 




    I've heard of this...but I am just gonna assume the same lazy worker who installed my backplate LED incorrectly scratched the back plate a bit too. Ah well. Can't see it from outside the case anyway. And the LED is fixed now. The experience has been a bit dissapointing but hey, my GPU works 100% now, so oh well I guess. 
     
     

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #15
    DukeCLR
    iCX Member
    • Total Posts : 254
    • Reward points : 0
    • Joined: 2007/01/07 06:04:28
    • Location: All over.
    • Status: offline
    • Ribbons : 1
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:43:52 (permalink)
    Soulshot96
     
     
    I know I didn't cause the ones on the sticker. Also, a EVGA rep says that is normal...so whatever. If it matters though, I got it from Newegg. 




    I buy a lot of stuff from Newegg and I have had them send me open box items as new. A friend of mine got a laptop that had been used and returned, it turned out it was a lemon so I don't trust them. 




    I've heard of this...but I am just gonna assume the same lazy worker who installed my backplate LED incorrectly scratched the back plate a bit too. Ah well. Can't see it from outside the case anyway. And the LED is fixed now. The experience has been a bit dissapointing but hey, my GPU works 100% now, so oh well I guess. 
     
     




     
    I'm glad you got it fixed, when it comes to tech problems EVGA is a great company to deal with.

    PhanTeks Enthoo Evolv TGE
    Intel Core i7 8700k @ 5.0
    EVGA Z390 FTW
    EVGA GTX 3080 FTW3
    GSkill Ripjaws 16Gb
    EVGA CLC280
    PSU EVGA 850 T2


     
    #16
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/11 09:47:20 (permalink)
     
    I'm glad you got it fixed, when it comes to tech problems EVGA is a great company to deal with.

     
    Yep, that was actually something that surprised me...I've heard how great their tech support is...but damn. The dude I talked too actually sounded like he knew what he was talking about and gave good suggestions. I mean sure, it still sucks I had to do this, but they handled it as good as I could expect. 

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #17
    Irsadd
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 2015/12/29 19:58:34
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/23 07:05:02 (permalink)
    I'm having the same issue.  My FTW3 backplate LED doesn't light up.  Not really keen on the idea of taking the backplate off.
    #18
    Soulshot96
    New Member
    • Total Posts : 63
    • Reward points : 0
    • Joined: 2015/04/04 09:46:29
    • Location: USA
    • Status: offline
    • Ribbons : 0
    Re: Just got my FTW3...and the backplate LED doesn't work. 2017/05/23 07:32:16 (permalink)
    Irsadd
    I'm having the same issue.  My FTW3 backplate LED doesn't light up.  Not really keen on the idea of taking the backplate off.




    You only need to remove the right side of it, and EVGA will fully endorse you doing so. That said, if you aren't comfortable doing so, they will offer you a full replacement with a new card inside of 15(or maybe 30 days), and a refurb FTW3 out of that period, even for something as small as this LED. So either pull the plate and see if reseating it will fix it, or contact their support. Only options you have. 

    Main Rig: MONOLITH MK2
     
    OS-Windows 10 Home 64 bit
    CPU-Intel Core i9 9900KS @5.0Ghz 1.26v
    GPU-2080Ti XC Ultra @2085 core, 15.2Ghz eff. mem.
    MOBO-ASUS MAXIMUS XI CODE
    RAM-Corsair Dominator Platinum DDR4 32GB (4x8GB) @3000MHz CL15
    COOLING-Full custom loop
    BOOT DRIVE-Samsung 970 EVO 500GB NVMe
    STORAGE DRIVE 1-WD Black 6TB 7200rpm
    STORAGE DRIVE 2-WD Black 2TB 7200rpm
    STORAGE DRIVE 3-Sandisk 240GB SSD
    PSU-Corsair RMi 850 w/Cablemod Pro series custom cables; white
    CASE-Corsair 500D SE
    MAIN MONITOR-Asus ROG Swift PG279Q 144hz IPS 4ms Gsync


     
     
     
    #19
    Jump to:
  • Back to Mobile