Hello,
 
I would like to build my own custom cables for my 1200 P2 PSU. While the part numbers on component side are pretty obvious, do you know where I could find a reference to the PSU side connectors, ie the mating connectors for these
 
There are 5 different types of connectors (mobo x 2, SATA/periph, CPU (EPS), VGA (PCI-E)), but since Molex site is hard to browser (visuals may not match the part being looked at), it's hard to tell.

EVGATech_MDecker
Hello,
 
happy to hear you would like to create and sleeve your own cables.
 
Here is the pin-out diagram for the G2/P2/T2/G3/B3 series
 
 

thanks for the pin-out MDecker !
 
My question was more about the part numbers of the connectors plugged to the PSU itself : each cable has 2 ends : one end with typical connectors (SATA, Molex, 24V mobo, 6+8 VGA, etc...) that are standard, and one end that is plugged to the PSU itself.
It seems EVGA is using MOLEX minifit Jr connector cases, but I would like to know which ones. it is impossible to do visual matching using Molex website as the visuals are common to a full range, and don't represent the exact connector. Opening technical drawing takes forever :)