LiquidTN
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2011/03/04 15:11:17
- Location: NC
- Status: offline
- Ribbons : 0
Hello all - So I bought the CLC 280 - which has been great! However, when I select the LEDs to represent Temps CPU or Coolant)...it doesn't seem to work well. There are only 3 temp ranges: low, mid and high, (40, 60 and 80 - I know these can be changed). After I select it, sure enough, it'll show blue (lowest temp), but I then can run a cpu stress test (like Cinebench) and the LED doesn't change to represent the proper CPU temp - or, when it does change, it'll go red (80), of which, my CPU has never gotten that hot. My highest temp has been 62 c (which should show the middle temp range and NEVER does). All other LED selections (breathing, pulse, rainbow) all work fine, but I like to have LED color temp representation. Anyone else having this issue? I know the software is probably still undergoing changes. Thanks... System: Asus Maximus XI Code Z270 m/b i7-7700k w/ EVGA CLC 280 cooler (running v2.0.1 and Firmware 2.10.0.0) 32 gig DDR4-3200 Geil Ram EVGA 1070 FTW Hybrid (running Precision XOC 6.1.2) 2 Samsung EVO 960 M.2 250 Win 10 Pro
|
Grapejelly
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2007/06/04 08:07:53
- Status: offline
- Ribbons : 0
Re: Flow Control software LED issues...
2017/04/08 12:00:37
(permalink)
I too experience this exact same behavior.
Case: EVGA DG-87PSU: EVGA SuperNOVA 1200 P2Motherboard: EVGA Z690 Classified CPU: Intel Core i9-12900KCooling: EVGA CLC 360Memory: 64GB Corsair Vengeance DDR5 5200MHzDisk: Samsung 990 PRO m.2 SSD 2TBStorage: Samsung 970 PRO m.2 SSD 1TBStorage: Samsung 960 PRO m.2 SSD 512GBGraphics: 2x EVGA GeForce GTX 1080 CLASSIFIED (SLI) Affiliate Code: PTDD5CC38F
|
MDeckerM
FTW Member
- Total Posts : 1799
- Reward points : 0
- Joined: 2015/09/21 17:32:43
- Location: RwlRwlRwlRwl
- Status: offline
- Ribbons : 8
Re: Flow Control software LED issues...
2017/04/08 19:08:00
(permalink)
Hello, very sorry to hear that the software is not allowing these settings to work properly. I will notify our Product Management team so we can address this in a future release. Thank you
|
91gtabird
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2016/09/01 18:02:07
- Status: offline
- Ribbons : 0
Re: Flow Control software LED issues...
2017/04/11 14:42:37
(permalink)
Same here. i5 7600K MSI Z270 Gaming Pro Carbon (RGB) 16GB Corsair Vengence RAM (RGB) EVGA CLC 280mm (RGB) EVGA GTX 1080 FTW (RGB) EVGA 850w GQ Corsair 400c Case
|
brhodes15
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2017/05/08 17:27:42
- Status: offline
- Ribbons : 0
Re: Flow Control software LED issues...
2017/05/24 16:30:14
(permalink)
same issue.. any work around yet or just have to wait for update?
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 16946
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: Flow Control software LED issues...
2017/06/21 11:27:08
(permalink)
This is fixed in 2.0.3 releasing today.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Flow Control software LED issues...
2017/06/21 12:40:22
(permalink)
EVGA_JacobF This is fixed in 2.0.3 releasing today.
|
Koithim
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2017/03/14 18:24:49
- Location: Canada
- Status: offline
- Ribbons : 3
Re: Flow Control software LED issues...
2017/06/21 13:12:10
(permalink)
Geting a connection refused message. I'm from Canada. Update: used Edge instead of Chrome and it worked ok. Cheers!
post edited by Koithim - 2017/06/21 13:14:19
CASE: EVGA DG-87 | COOL: ASUS Ryujin 360PSU: EVGA SuperNOVA 1000 T2 | MOBO: ROG Maximus XI ExtremeCPU: i9-9900k @ 5.0 GHz | 4x8GB G.skill Trident Royal ddr4-4000SSD: Samsung 960 Pro 512GB PCIe M.2EVGA GeForce RTX 3090 FTW3 ULTRADisplay: Asus PG279Q | Windows 10 pro 21H2
|
Koithim
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2017/03/14 18:24:49
- Location: Canada
- Status: offline
- Ribbons : 3
Re: Flow Control software LED issues...
2017/06/21 13:22:13
(permalink)
Both problems i had are fixed: Led temp color and auto fan now load on boot. Thank you!!!
CASE: EVGA DG-87 | COOL: ASUS Ryujin 360PSU: EVGA SuperNOVA 1000 T2 | MOBO: ROG Maximus XI ExtremeCPU: i9-9900k @ 5.0 GHz | 4x8GB G.skill Trident Royal ddr4-4000SSD: Samsung 960 Pro 512GB PCIe M.2EVGA GeForce RTX 3090 FTW3 ULTRADisplay: Asus PG279Q | Windows 10 pro 21H2
|
brhodes15
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2017/05/08 17:27:42
- Status: offline
- Ribbons : 0
Re: Flow Control software LED issues...
2017/06/22 17:54:33
(permalink)
EVGA_JacobF This is fixed in 2.0.3 releasing today.
i have my Rgb fan connected to a controller, so the software says my fan rpm is 0. could that be why the led still turns red eventually no matter what setting i have it on?
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21171
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: Flow Control software LED issues...
2017/06/22 18:13:48
(permalink)
post edited by ty_ger07 - 2017/06/22 18:19:30
|
daniel0
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2015/02/14 17:33:30
- Status: offline
- Ribbons : 0
Re: Flow Control software LED issues...
2018/01/13 09:23:48
(permalink)
Sorry for resurrecting this thread, but I recently installed a clc 240 and it seems that the flow control software won't open when LED sync is open (and LED sync opens before precision and flow control.) I have to close the sync program to open flow control but then if i go to the sync it only shows my 1080.
|
MFnRuckus
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2018/02/17 14:36:43
- Status: offline
- Ribbons : 0
Re: Flow Control software LED issues...
2018/02/18 15:17:43
(permalink)
Still getting this issue with v2.10.0.0 The LED turns red after a few mins of gaming and turns back after a few mins of no gaming. Please advise.
|
MFnRuckus
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2018/02/17 14:36:43
- Status: offline
- Ribbons : 0
Re: Flow Control software LED issues...
2018/02/27 09:50:54
(permalink)
Seems the LED changes to red after the coolant hits 45c
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: Flow Control software LED issues...
2018/03/06 10:47:24
(permalink)
|