Tech_RayH
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2016/05/13 10:03:33
- Status: offline
- Ribbons : 7
Re: Important update regarding FTW3 Length
2017/04/08 12:21:53
(permalink)
LValiant
So, is it 11.37 or 11.8 as on the spec sheet?
We did see that there was a change on the site regarding the dimensions, we will see if we can clarify and provide a final specification
...an untrammeled flow of words in an open forum. - Adlai E. Stevenson
|
howdy2u2
FTW Member
- Total Posts : 1896
- Reward points : 0
- Joined: 2006/12/01 04:31:48
- Status: offline
- Ribbons : 6
Re: Important update regarding FTW3 Length
2017/04/08 13:22:17
(permalink)
EVGATech_RayH
LValiant
So, is it 11.37 or 11.8 as on the spec sheet?
We did see that there was a change on the site regarding the dimensions, we will see if we can clarify and provide a final specification
If that's the case you better update the update, those few who have asked if they will fit and were close might not make it now after being told they would........oh boy!!
|
CriticalHit_NL
iCX Member
- Total Posts : 404
- Reward points : 0
- Joined: 2009/09/08 10:23:06
- Status: offline
- Ribbons : 17
Re: Important update regarding FTW3 Length
2017/04/09 08:30:44
(permalink)
EVGA_JacobF
The FTW3 card length is 11.37in.
SC2 is 10.5in.
The specifications keep changing, are you sure the current specifications listed are final now? Also could we have some clarification about the diameter of the fans used on each model? Because some media have been mentioning 100mm fans on the FTW3, but I find it hard to believe when the card itself is under 300mm according to current specifications.
i7 3930K 4.4Ghz - EVGA 1080Ti FTW3 - 32GB Corsair Dominator DDR3-1866 - Asus Sabertooth X79 - Samsung 840 Pro 256GB - Samsung 860 Pro 2TB - 3x HGST 7K4000 Deskstar 4TB - 3x HGST Ultrastar He10 8TB - Corsair AX1200i - Asus PG279Q + BenQ BL2411 - Razer Viper Mini/SBF98 - Logitech Z906 & G35 - Windows 10 Professional
|
RustyGaming
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2016/06/16 15:08:57
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/09 10:26:03
(permalink)
Any word on if it will fit in the S340 Elite? I saw a few comments about whether it will be too tall, not worried about length.
Thanks
|
yeungster
New Member
- Total Posts : 55
- Reward points : 0
- Joined: 2017/03/25 15:33:07
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/09 10:52:08
(permalink)
CriticalHit_NL
EVGA_JacobF
The FTW3 card length is 11.37in.
SC2 is 10.5in.
The specifications keep changing, are you sure the current specifications listed are final now?
Also could we have some clarification about the diameter of the fans used on each model?
Because some media have been mentioning 100mm fans on the FTW3, but I find it hard to believe when the card itself is under 300mm according to current specifications.
Makes sense for them to be 90mm each with around 20mm around the end edges
|
TheSandmaN666
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2015/06/23 05:49:29
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/09 10:54:56
(permalink)
VLL3N
Incase anyone out there like me has a NZXT s340 case and are worried about the fit.. I once fit a Gigabyte Windforce GTX 970 (11.693 inches or 297mm) and it fit with some room. So we should be good to go =D
This is a relief as I'm going with an s340 Elite case for my next build(s).... that is, it'll be a relief if I actually decide to go with the FTW3. Still debating if it's going to be worth the extra $$$ and wait time for this bad boy.
|
TBreeding32
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/04/09 12:01:16
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/09 12:02:30
(permalink)
Does anybody have an idea whether or not the ftw3 will fit In the Corsair 750D or not? I have one preordered just wasn't sure.
|
specialkone
New Member
- Total Posts : 62
- Reward points : 0
- Joined: 2016/06/21 14:20:30
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/09 22:51:46
(permalink)
TBreeding32
Does anybody have an idea whether or not the ftw3 will fit In the Corsair 750D or not? I have one preordered just wasn't sure.
If you look at this review of the 750D case, it says it supports a max GPU length of 460mm, which by my math converts to 18.1 inches. No sweat. http://hexus.net/tech/rev...-obsidian-series-750d/ Motherboard Support
Micro ATX / ATX / E-ATX / XL-ATX
Drive Bays
External
5.25in x 3
Internal
2.5in x 4
2.5/3.5in x 6
Cooling
Support for up to 8 fans (3x AF140L fans included)
Radiator Support
Top: up to 360mm
Front: up to 280mm
Bottom: up to 240mm
Expansion Slots
9
Max CPU Cooler Height
180mm
Max GPU Length
460mm
Dimensions (HxWxL)
560mm x 235mm x 546mm
EVGA FTW 1080, EVGA SuperNova 1,000W PSU, Asus Rog Maximus VIII Formula MB, I7 6700K CPU, Corsair H110i Liquid CPU Cooler, Corsair Obsidian 750D Case, Corsair Vengeance 16G DDR4 memory @ 2666MHZ, Samsung 850 EVO 500GB, Seagate 3T @ 7200RPM, SB XFI Titanium, BenQ XL2720Z, Corsair K70 Rapidfire RGB Keyboard, Corsair M65 Pro RGB Mouse
|
123Testing123
iCX Member
- Total Posts : 409
- Reward points : 0
- Joined: 2017/02/28 20:07:02
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/10 08:44:27
(permalink)
RustyGaming
Any word on if it will fit in the S340 Elite? I saw a few comments about whether it will be too tall, not worried about length.
The current (as of the time of this writing) length of an FTW3 is: Length: 11.8in - 299.72mm The user manual for the NZXT S340 Elite lists the following. GPU Clearance: - with radiator – 334mm
- without radiator – 364mm
So, if you’re using a radiator with a width of 30mm (interestingly enough, that’s the exact radiator width of the Kraken series of NZXT AIO’s), you’ll have 34.28mm to spare (334 - 299.72 = 34.28). You can do the math if you’ve got a different set up: - Radiator width – GPU length = how much room to spare.
If ‘how much room to spare’ is a positive number, you’re golden. If ‘how much room to spare’ is a negative number, you’ll have to make a change (different cooling solution, different GPU, different case, etc.). HTH…
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: Important update regarding FTW3 Length
2017/04/10 09:38:38
(permalink)
Don't forget another 25mm for the rad fans in push or pull configuration.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 16946
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: Important update regarding FTW3 Length
2017/04/10 10:34:24
(permalink)
Length on product pages is correct, it was updated to include the length of the shroud as well, not just PCB. (Shroud slightly protrudes out). First post updated also.
|
123Testing123
iCX Member
- Total Posts : 409
- Reward points : 0
- Joined: 2017/02/28 20:07:02
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/10 10:35:32
(permalink)
GTXJackBauer
Don't forget another 25mm for the rad fans in push or pull configuration.
Let me preface what's to follow by saying I do not own an S340 or S340 Elite, nor have I ever worked with one. I'm inferring, reading between the lines and taking my best guess as to the conclusions I'm drawing. YMMV, don't try this at home, etc.  I believe the measurements as listed take into account the front fans of 26mm already since front fans would be pretty much mandatory given the case only supports 2 other fans (not counting an air cooled CPU setup and a PSU fan). Also, to be honest, I believe the case was designed to work well with other NZXT components, one being a Kraken X62, X52 or X42. All of these AIO's come with a radiator width that measures 30mm and one or two fans with a width of 26mm. Notice in my message above I referenced the GPU clearance with and without a radiator. Interestingly the difference = 30mm, the very same measurement as their radiator width. And note that not all AIO radiators are the same width. For instance a Corsair H115i's radiator measures 26mm and EVGA's own CLC 280 AIO radiator has a width of 27mm. BTW - the S340 and S340 Elite cases do not support push-pull setups in the front due to the placement of the cable management bar (but you probably already knew that, huh?!).
|
KLEYBA
SSC Member
- Total Posts : 936
- Reward points : 0
- Joined: 2005/01/30 15:53:56
- Status: offline
- Ribbons : 12
Re: Important update regarding FTW3 Length
2017/04/10 12:11:46
(permalink)
looks like I get to sit at the 'Elite Table'..... (gets up) excuse me commoners, I just qualified, barely, for the Elite thingy!
|
TBreeding32
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/04/09 12:01:16
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/10 12:35:47
(permalink)
specialkone
TBreeding32
Does anybody have an idea whether or not the ftw3 will fit In the Corsair 750D or not? I have one preordered just wasn't sure.
If you look at this review of the 750D case, it says it supports a max GPU length of 460mm, which by my math converts to 18.1 inches.
No sweat.
Motherboard Support
Micro ATX / ATX / E-ATX / XL-ATX
Drive Bays
External
5.25in x 3
Internal
2.5in x 4
2.5/3.5in x 6
Cooling
Support for up to 8 fans (3x AF140L fans included)
Radiator Support
Top: up to 360mm
Front: up to 280mm
Bottom: up to 240mm
Expansion Slots
9
Max CPU Cooler Height
180mm
Max GPU Length
460mm
Dimensions (HxWxL)
560mm x 235mm x 546mm
Thank you. Can't wait to see how it will look in my case. Any idea whether or not the power link will fit between the card and the window?
|
specialkone
New Member
- Total Posts : 62
- Reward points : 0
- Joined: 2016/06/21 14:20:30
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/10 14:14:25
(permalink)
Sorry, didn't go for the power link. I actually really like the look of the power supply cables on this EVGA Super Nova G1 power supply. Those cables showing through the glass are fine by me.
My 1080 FTW looks gorgeous in the Corsair 750D case. Right now I have the ftw, corsair cooler and Asus MB all matching in a rich tone of blue.
Enjoy and congrats on the FTW3.
EVGA FTW 1080, EVGA SuperNova 1,000W PSU, Asus Rog Maximus VIII Formula MB, I7 6700K CPU, Corsair H110i Liquid CPU Cooler, Corsair Obsidian 750D Case, Corsair Vengeance 16G DDR4 memory @ 2666MHZ, Samsung 850 EVO 500GB, Seagate 3T @ 7200RPM, SB XFI Titanium, BenQ XL2720Z, Corsair K70 Rapidfire RGB Keyboard, Corsair M65 Pro RGB Mouse
|
MitchWh
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2017/04/10 14:18:42
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/10 14:39:38
(permalink)
Fortunately i bought a Phantkes Enthoo Luxe last year, to use all 3-fan-cards without any problems. 35cm space without removing the HDD cage should be more then enough, even when EVGA fails again with the numbers. :D
|
Eyoun
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2015/12/19 09:24:03
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/12 14:30:20
(permalink)
Thanks for this information also i have Corsair Obsidian Series 750D Maximum GPU Length 450mm will be fine !!
|
kwc813
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2008/11/07 10:55:12
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/15 12:26:55
(permalink)
Glad I waited...now I'll give it even more time 
|
condemned5
Superclocked Member
- Total Posts : 131
- Reward points : 0
- Joined: 2016/10/18 08:01:21
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/15 22:34:25
(permalink)
I wonder if a mod with access to the FTW 3 can post a picture with the EVGA powerlink connected so that we can see if the powerlink covers the LEDs.
|
spye435
Superclocked Member
- Total Posts : 107
- Reward points : 0
- Joined: 2016/08/19 05:33:48
- Location: Preston UK
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/17 23:30:42
(permalink)
I've currently got the NZXT S340 with a ZOTAC GTX 1080, & the kraken X62 AIO. The ZOTAC is 300mm (11.8 in) by 148mm (5.83 in) and it fits no problem at all, its also bigger than my pre ordered FTW3 (if the dimensions don't change), so Don't sweat it if you've got the S340
NZXT S340 I7 8086K @5.0 GHz Kraken X62 AIO16 Gb Corsair DDR4 3000 256 Gb Samsung SM961 M.2 SSD, 512 Gb 850 Evo SSD WD Blue 2TBAsus Maximus X Hero MOBOEVGA Supernova P2 850W PSUEVGA RTX 2080Ti FTW3 ULTRAACER Predator XB321HK
|
Mrquick92
Superclocked Member
- Total Posts : 169
- Reward points : 0
- Joined: 2017/04/15 15:47:57
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/17 23:43:46
(permalink)
Eyoun
Thanks for this information also i have Corsair Obsidian Series 750D Maximum GPU Length 450mm will be fine !!
750D brother. It's nice not having to worry about the length of the gpu. 
May our framerates be high and our temperatures low. Case: Corsair Obsidian 750D | MoBo: ASUS Maximus VI Hero | CPU: Intel i7 4770k @4.3GHz | Memory: Corsair Vengeance Pro 16GB @ 2133 | GPU: EVGA GTX 1080Ti FTW3 | Storage: SAMSUNG 850 EVO 500GB, WD Black 2TB | PSU: Corsair HX850i 850W | Cooler: Corsair H110i GTX Cooler | Monitor: ASUS ROG Swift PG279Q 1440p @144hz | KB: CM Storm QuickFire Pro | Mouse: Logitech G403 Prodigy Wireless | Headphones: Beyerdynamic DT 770 PRO My Affiliate Code: 3DE52OR4ZM
|
Ab1987
Superclocked Member
- Total Posts : 196
- Reward points : 0
- Joined: 2017/03/28 14:35:01
- Location: NYC
- Status: offline
- Ribbons : 1
Re: Important update regarding FTW3 Length
2017/04/17 23:46:20
(permalink)
|
MonkJayn
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2017/03/30 21:56:03
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/18 00:45:19
(permalink)
awesome, thats pretty much the same size as my current zotac 980 amp extremes, so i guess i can use them as placeholders in my new case to plan the build out :)
|
condemned5
Superclocked Member
- Total Posts : 131
- Reward points : 0
- Joined: 2016/10/18 08:01:21
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/04/18 08:49:51
(permalink)
is it possible to measure the total length of the FTW3 with the EVGA powerlink installed?
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Important update regarding FTW3 Length
2017/04/18 08:53:14
(permalink)
condemned5
I wonder if a mod with access to the FTW 3 can post a picture with the EVGA powerlink connected so that we can see if the powerlink covers the LEDs.
Mods dont have access to any of EVGA hardware unless they buy it. Only the production and advertising team has access, and they dont like to release things until they are ready. Try asking Jacob on twitter for a picture (@evga_jacobf) and you may get what you are looking for.
|
CapedCrusader117
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2017/10/14 19:15:39
- Status: offline
- Ribbons : 0
Re: Important update regarding FTW3 Length
2017/10/16 19:03:05
(permalink)
Will this be long enough to reach the front of the 780T fans?
|