EVGA

Various Issues, No Video after post, Random Lockups with USB

Author
maryor
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2008/10/28 08:12:34
  • Status: offline
  • Ribbons : 0
2017/03/21 09:56:31 (permalink)
Before I start, here is my setup.
I7 930
3x2gb Ram ADATA
EVGA X58 SLI LE
EVGA GeForce GTX 1060 SC
256gb SSD
2x 1tb 7200 HDD
320gb 7200 HDD
DVD R/RW
Antec EarthWatts EA750 750W
4x 120mm Case Fans
220mm Case Fan
CPU Heatsink and NF-F12 PWM Fan
USB Keyboard
USB Mouse
 
Here are the issues I'm having.
1. Ever since I put this build together (in 2010), if had the system unplugged from the wall and then plugged it it, it would boot to post, shut off and then boot again with no more shut downs.
2. Ever since I put the GTX 1060 in, ( it replaced a GTX465) Every once in a while on while booting, the monitor displays the post information just fine, however after that the monitor just goes black like it has no signal. If I hit the restart button on the case, it seems to boot just fine and displays everything just fine.
3. Recently, (in the last couple months) every once in a while when I plug in a USB device (mainly my iphone 6 while in windows) , the computer will just freeze. Last time this happened, I tried to restart it and the post screen came up but harddrives post took a lot longer than normal and then it said no keyboard detected. Restarted it a couple more time with the same results. After I powered it off for an hour or so, I powered it up and it booted up and loaded into windows.
 
At this point I'm trying to narrow down what is bad in the system, is it one thing causing all the issues or is multiple things?
Any help is appreciated.
#1

4 Replies Related Threads

    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Various Issues, No Video after post, Random Lockups with USB 2017/03/21 12:22:57 (permalink)
    Sounds like the board needs a bios update. Make sure your usb drivers are current as well.
    #2
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49168
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: online
    • Ribbons : 199
    Re: Various Issues, No Video after post, Random Lockups with USB 2017/03/21 12:23:35 (permalink)
    Moving thread to EVGA Intel 5/6/7/8/9 Series.
     
    #3
    maryor
    New Member
    • Total Posts : 8
    • Reward points : 0
    • Joined: 2008/10/28 08:12:34
    • Status: offline
    • Ribbons : 0
    Re: Various Issues, No Video after post, Random Lockups with USB 2017/03/23 04:52:15 (permalink)
    I have updated my bios and still nothing has changed.
     
    Looked on my motherboard a little closer and it looks like it was manufactured in 2005 (maybe 2006, I can't remember off hand). 
     
    Tested my power supply with 3 fans and a HDD connected and it all voltage readings were on mark. (12v,3.3v,5v,-12v,-5v).
     
    Looks like its time to upgrade to new motherboard, processor and ram unless someone can change my mind. :)
     
    #4
    delta7
    iCX Member
    • Total Posts : 457
    • Reward points : 0
    • Joined: 2010/03/08 19:24:46
    • Location: Great State of Texas
    • Status: offline
    • Ribbons : 2
    Re: Various Issues, No Video after post, Random Lockups with USB 2017/03/23 13:28:30 (permalink)
    What operating system are you using?
     

     
     
     
     
     
     
     
     
     
     
     
    #5
    Jump to:
  • Back to Mobile