Everything will be just fine, Restart the PC and the driver is not installed to the card.
Basically have to reinstall the drivers every time I restart.
 
I've searched the forum, google, and found nothing
 
EVGA GeForce GTX 1050 Ti FTW GAMING ACX 3.0, 04G-P4-6258-KR
Foxconn G31MXP-K | C2Q Q6600
Windows 10 64-Bit
No other cards installed.
 
thanks...

mr_scary
Everything will be just fine, Restart the PC and the driver is not installed to the card.
Basically have to reinstall the drivers every time I restart.
 
I've searched the forum, google, and found nothing
 
EVGA GeForce GTX 1050 Ti FTW GAMING ACX 3.0, 04G-P4-6258-KR
Foxconn G31MXP-K | C2Q Q6600
Windows 10 64-Bit
No other cards installed.
 
thanks...

Do this to see if it helps stop the problem from occurring...
 
#1 Set device installation settings set to "No".
#2 Set windows update to disabled inside services.msc.
#3 Set windows update tasks to disabled inside taskschd.msc.
#4 Do #2 listed here.

I'll double check the bios and make sure the on-board is disabled.
 
I know it's an older motherboard, but the card should be supported
PCI Express, PCI Express 2.0 or PCI Express 3.0 compliant motherboard with one graphics slot.
 
And there are no other issues, windows 10 64-bit runs great.
It also ran fine with a GT710 1GB.

Sajin
Do this to see if it helps stop the problem from occurring...
 
#1 Set device installation settings set to "No".
#2 Set windows update to disabled inside services.msc.
#3 Set windows update tasks to disabled inside taskschd.msc.
#4 Do #2 listed here.

I'll give these a try.
Actually I will use a spare hard drive and just do a clean windows install to rule out any issues with the current Win10 install.

HeavyHemi
Also....things like this can occur if your CMOS battery is bad.

CMOS battery is good, all BIOS settings remain even after power removal. Time and date all good.



Recieved an erreor code 43, restarted and all is good. (weird)
restarted a couple more times with ERROR code 43 again.
Cannot disable onboard video, however it's set to AUTO. and is not present in Device Manager. (so it's disabled)
PCI Express compliant mode (1.0a)
Maximum Payload is (128) no other option available
 
I re-seated the card for good measure, but I doubt that's an issue.
 
Will do a clean windows install and report back
 
 

Well no issues with previous drivers 376.53 with the previuos installed Win10, or the freshly installed Windows10
the issue will occur with 378 drivers.
 
So it must be something they changed that causes the conflict or the initialization of the driver or card. 
causing a (code 43)
 
I have another PC here with the same card installed.
EVGA X58 E758 motherboard with i7-920, No issues at all with current drivers.
 

Thanks for the link Sajin, I will file a report.  I tried the link on the driver page, but it says invalid IP.
I also downloaded the Windows Update Show/Hide tool for future issues.
Thanks for the help. Nice tutorial you have for solving issues.
starting with a fresh windows install on a second hard drive will shorten the trouble shooting process.
Even though a lot of those guys don't agree.
 
Appreciate the help everyone.
I will update here if I find out anything further.