malVizio
CLASSIFIED Member
- Total Posts : 2391
- Reward points : 0
- Joined: 2011/09/26 10:24:30
- Location: Affiliate code: A83U9ZY5VO
- Status: offline
- Ribbons : 8
So...I'm back after a while!! I was on budget so I bought spare parts to uild a gaming/workstation. Hope you like guys...for [link=mailto:gaming@1980x1200]gaming@1980x1200[/link] works pretty fine! http://www.modsrigs.com/detail.aspx?BuildID=36096 CPU+COOLER+MOBO+32gb RAM: 400€ Hdd+3ssd: 180€(2 had from preview RIG) PSU: 80€ Mouse+Keyb: 100€ Case: 80€ Monitor: 90€ GPU: 200€ total: 1130€
post edited by malVizio - 2017/03/04 05:06:00
Case:Silverstone FT02 M.B.:EVGA DARK X79/PSU: Corsair HX1000 GPU:EVGA GTX980Ti SC /RAM:32GB DDR3 Corsair CPU:Intel i7 3930K+Noctua NH-D14FANS:3xSilverstone SP200mm SSD/HDD:2xSamsung EVO 850 256/1xPNY 256gb/Seagate 500gb MICE:Razer DA Elite/KB:Collermaster Rapid I/HP:Shure SRH440/Logitech G633 Screen:Dell Ultrasharp 2711U
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: New Rig with 2nd hand spare parts
2017/03/04 14:12:31
(permalink)
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: New Rig with 2nd hand spare parts
2017/03/04 16:13:02
(permalink)
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
malVizio
CLASSIFIED Member
- Total Posts : 2391
- Reward points : 0
- Joined: 2011/09/26 10:24:30
- Location: Affiliate code: A83U9ZY5VO
- Status: offline
- Ribbons : 8
Re: New Rig with 2nd hand spare parts
2017/03/05 00:13:15
(permalink)
i know guys you all running 4K system, but for me is more than enough! Thanks guys!
Case:Silverstone FT02 M.B.:EVGA DARK X79/PSU: Corsair HX1000 GPU:EVGA GTX980Ti SC /RAM:32GB DDR3 Corsair CPU:Intel i7 3930K+Noctua NH-D14FANS:3xSilverstone SP200mm SSD/HDD:2xSamsung EVO 850 256/1xPNY 256gb/Seagate 500gb MICE:Razer DA Elite/KB:Collermaster Rapid I/HP:Shure SRH440/Logitech G633 Screen:Dell Ultrasharp 2711U
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: New Rig with 2nd hand spare parts
2017/03/05 01:01:31
(permalink)
Nice system and enough for gaming. With different graphic card you will be able to play and on higher resolutions. Nice case, with excellent airflow. That's AP181 Silverstone 2 or 3 of them. They are very effective. Later if you decide to change something your RIG could look even better. With different PSU 750W P2 and EVGA 120 AIO CPU Cooler. That will be completely new dimension, but for now you can keep this. I always liked Silverstone cases and Lian-Li... not all of them but Fortress are nicest Silverstone line.
post edited by Vlada011 - 2017/03/05 01:04:11
|
malVizio
CLASSIFIED Member
- Total Posts : 2391
- Reward points : 0
- Joined: 2011/09/26 10:24:30
- Location: Affiliate code: A83U9ZY5VO
- Status: offline
- Ribbons : 8
Re: New Rig with 2nd hand spare parts
2017/03/05 02:04:20
(permalink)
Vlada011 Nice system and enough for gaming. With different graphic card you will be able to play and on higher resolutions. Nice case, with excellent airflow. That's AP181 Silverstone 2 or 3 of them. They are very effective. Later if you decide to change something your RIG could look even better. With different PSU 750W P2 and EVGA 120 AIO CPU Cooler. That will be completely new dimension, but for now you can keep this. I always liked Silverstone cases and Lian-Li... not all of them but Fortress are nicest Silverstone line.
Yeah totally agree on the Silverstone's case! this got such a nice airflow but others(Raven) i don't like it! actually my 2nd favorite it's the corsair 650D that i had before, I much prefear this style, as you(nice RIG BTW!) I was looking for a nice EVGA PSU, i love the look and the performances, but it's a 2nd hand build so this is the best i found at that moment! Maybe i'll go for an upgrade later on, but when i decide to go with higher resolution! thanks for the suggestion Vlada011!! Uff I don't remember how to put the modrig link under the profile pic...
Case:Silverstone FT02 M.B.:EVGA DARK X79/PSU: Corsair HX1000 GPU:EVGA GTX980Ti SC /RAM:32GB DDR3 Corsair CPU:Intel i7 3930K+Noctua NH-D14FANS:3xSilverstone SP200mm SSD/HDD:2xSamsung EVO 850 256/1xPNY 256gb/Seagate 500gb MICE:Razer DA Elite/KB:Collermaster Rapid I/HP:Shure SRH440/Logitech G633 Screen:Dell Ultrasharp 2711U
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: New Rig with 2nd hand spare parts
2017/03/05 03:25:21
(permalink)
Did you check inside option Who can see this rig - Public? and Set as Primary RIG.
|
malVizio
CLASSIFIED Member
- Total Posts : 2391
- Reward points : 0
- Joined: 2011/09/26 10:24:30
- Location: Affiliate code: A83U9ZY5VO
- Status: offline
- Ribbons : 8
Re: New Rig with 2nd hand spare parts
2017/03/05 06:22:06
(permalink)
yeah!!!! thank you!!! the 'set as primary' made the job!
Case:Silverstone FT02 M.B.:EVGA DARK X79/PSU: Corsair HX1000 GPU:EVGA GTX980Ti SC /RAM:32GB DDR3 Corsair CPU:Intel i7 3930K+Noctua NH-D14FANS:3xSilverstone SP200mm SSD/HDD:2xSamsung EVO 850 256/1xPNY 256gb/Seagate 500gb MICE:Razer DA Elite/KB:Collermaster Rapid I/HP:Shure SRH440/Logitech G633 Screen:Dell Ultrasharp 2711U
|
malVizio
CLASSIFIED Member
- Total Posts : 2391
- Reward points : 0
- Joined: 2011/09/26 10:24:30
- Location: Affiliate code: A83U9ZY5VO
- Status: offline
- Ribbons : 8
Re: New Rig with 2nd hand spare parts
2017/03/13 04:06:40
(permalink)
So for a total of 70€ i got a 2 nice upgrades for my rig: An EVGA 980Ti SC and a Dell Ultrasharp U2711 (that i got really cheap for 20€) Going up @ 2560x1440 was really nice and cheap :DD
Attached Image(s)
Case:Silverstone FT02 M.B.:EVGA DARK X79/PSU: Corsair HX1000 GPU:EVGA GTX980Ti SC /RAM:32GB DDR3 Corsair CPU:Intel i7 3930K+Noctua NH-D14FANS:3xSilverstone SP200mm SSD/HDD:2xSamsung EVO 850 256/1xPNY 256gb/Seagate 500gb MICE:Razer DA Elite/KB:Collermaster Rapid I/HP:Shure SRH440/Logitech G633 Screen:Dell Ultrasharp 2711U
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re: New Rig with 2nd hand spare parts
2017/03/28 14:50:58
(permalink)
Cool looking build! HX1000 is such an indestructible psu! :P
My Affiliate Code: GL1IAAFWJF
|
malVizio
CLASSIFIED Member
- Total Posts : 2391
- Reward points : 0
- Joined: 2011/09/26 10:24:30
- Location: Affiliate code: A83U9ZY5VO
- Status: offline
- Ribbons : 8
Re: New Rig with 2nd hand spare parts
2017/03/30 23:21:58
(permalink)
Yeah it's really a good PSU! But now it's time to update it... I just found an exelent 1300 G2... i know it's an overkill but i found it @2nd hand 80 € .... and it's such a good PSU...think gonna take it...
Case:Silverstone FT02 M.B.:EVGA DARK X79/PSU: Corsair HX1000 GPU:EVGA GTX980Ti SC /RAM:32GB DDR3 Corsair CPU:Intel i7 3930K+Noctua NH-D14FANS:3xSilverstone SP200mm SSD/HDD:2xSamsung EVO 850 256/1xPNY 256gb/Seagate 500gb MICE:Razer DA Elite/KB:Collermaster Rapid I/HP:Shure SRH440/Logitech G633 Screen:Dell Ultrasharp 2711U
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: New Rig with 2nd hand spare parts
2017/04/01 00:18:38
(permalink)
malVizio Yeah it's really a good PSU! But now it's time to update it... I just found an exelent 1300 G2... i know it's an overkill but i found it @2nd hand 80 € .... and it's such a good PSU...think gonna take it...
For only 80 Euros...good bargain.
|
seth89
CLASSIFIED ULTRA Member
- Total Posts : 5290
- Reward points : 0
- Joined: 2007/11/13 11:26:18
- Status: offline
- Ribbons : 14
Re: New Rig with 2nd hand spare parts
2017/04/04 14:31:29
(permalink)
|
notfordman
Omnipotent Enthusiast
- Total Posts : 10345
- Reward points : 0
- Joined: 2007/08/09 23:52:23
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: New Rig with 2nd hand spare parts
2017/04/04 21:51:32
(permalink)
That's still a nice powerful gaming rig. Nicely done, Malvizio! +1 :) How did you find the Dell monitor for 20 Euro?
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30983
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: New Rig with 2nd hand spare parts
2017/04/05 07:03:32
(permalink)
Very nice budget friendly build
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102262
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: New Rig with 2nd hand spare parts
2017/04/08 03:49:01
(permalink)
You managed to get some great bargains on those parts.
|
MitchWh
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2017/04/10 14:18:42
- Status: offline
- Ribbons : 0
Re: New Rig with 2nd hand spare parts
2017/04/11 21:12:25
(permalink)
Great build! 1000W seems a bit overpowered for your components imao. :D
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: New Rig with 2nd hand spare parts
2017/04/11 21:14:34
(permalink)
MitchWh Great build! 1000W seems a bit overpowered for your components imao. :D
Nah! I have less, and I have a 1300w. :P
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
MitchWh
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2017/04/10 14:18:42
- Status: offline
- Ribbons : 0
Re: New Rig with 2nd hand spare parts
2017/04/12 15:02:49
(permalink)
XrayMan
MitchWh Great build! 1000W seems a bit overpowered for your components imao. :D
Nah! I have less, and I have a 1300w. :P
With 1300W you can power quite a lot of LEDs and fans in your case. :D
|