EVGA

Hot!G2 PSU pin out

Author
Post
Essentials Only Full Version
Broken
Superclocked Member
  • Total Posts : 189
  • Reward points : 0
  • Joined: 2005/11/09 15:30:14
  • Status: offline
  • Ribbons : 3
2016/07/21 19:25:40 (permalink)
Can anyone with an individually sleeved set of cables diagram the wires for me? Stock cables have some double wires and it looks like the individual ones don't. Making my own so any help would be appreciated.
#1

7 Replies Related Threads
    EVGA_Gabriel.S
    Administrator
    • Total Posts : 140
    • Reward points : 0
    • Joined: 2015/07/23 14:09:06
    • Status: offline
    • Ribbons : 1
    Re: G2 PSU pin out 2016/07/22 06:45:27 (permalink)
    Here you go.
     
    PDF Version - https://www.dropbox.com/s/7l73zfdban4f9rz/PSUG2P2T2.pdf?dl=0
     

    Attached Image(s)

    #2
    Broken
    Superclocked Member
    • Total Posts : 189
    • Reward points : 0
    • Joined: 2005/11/09 15:30:14
    • Status: offline
    • Ribbons : 3
    Re: G2 PSU pin out 2016/07/22 15:35:14 (permalink)
    Awesome. Thank you!
    #3
    olvr80
    New Member
    • Total Posts : 8
    • Reward points : 0
    • Joined: 2015/06/20 09:05:48
    • Status: offline
    • Ribbons : 0
    Re: G2 PSU pin out 2016/08/02 09:50:11 (permalink)
    Can I just ask, as a rank amateur, what this diagram means and how to 'read' it? I have been looking at custom sleeving and all I see for purchase is a single type wire and male/female terminals... how does that translate to the multi colours and voltages given on this pin out?? How do you wire it correctly when you only have one type of wire?? I have been Googling for an answer to this but can't seem to find one.
    #4
    Tweaked
    CLASSIFIED ULTRA Member
    • Total Posts : 6505
    • Reward points : 0
    • Joined: 2006/08/12 12:24:15
    • Location: Texas
    • Status: offline
    • Ribbons : 29
    Re: G2 PSU pin out 2016/08/04 10:12:09 (permalink)
    olvr80
    Can I just ask, as a rank amateur, what this diagram means and how to 'read' it? I have been looking at custom sleeving and all I see for purchase is a single type wire and male/female terminals... how does that translate to the multi colours and voltages given on this pin out?? How do you wire it correctly when you only have one type of wire?? I have been Googling for an answer to this but can't seem to find one.




    The ATX standard for power supplies uses the color code that you see for different colored wires in the correct location on the plug.  This is not popular with modders because they want to create a color theme, that's why you see power supplies now with a single color of wire.  What this means is that when you are creating your own cable, you should label (at least temporarily) each of your cables so you don't mix them up.  The color code you see in the diagram is as follows.
     
    Red = +5v
    Yellow = +12v
    Black = Ground
    Green = Power on
    Orange = +3.3
    Blue = -12v
    Purple = +5v Standby
    Grey = Power OK
     
    As long as you get the correct voltages/signals to the correct pins, it doesn't matter what color wire you use.
     
    Additionally, as you look at the diagram, it is oriented so that if you look down at the connector as it sits in the socket, that is the location of each of the correct pins for that voltage based on which connector you are looking at.
    post edited by Tweaked - 2016/08/04 10:15:09
    EVGA DG-77/ EVGA 750 G2/ Gigabyte B450/ AMD Ryzen 5 3600/ 16gb Crucial Ballistix DDR4-3600/ RTX-2080 XC/ Dell S2716DG / Windows 11 64
    #5
    musade
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2016/03/20 09:29:15
    • Status: offline
    • Ribbons : 0
    Re: G2 PSU pin out 2020/07/22 05:42:50 (permalink)
    Hello, what is Green pin normal voltage ?  I read 3.97 volt.  is it normal ?
    And I read 3.97 v on Purple (Stand by) pin too . 
     
    post edited by musade - 2020/07/22 06:12:23
    #6
    bob16314
    CLASSIFIED ULTRA Member
    • Total Posts : 7859
    • Reward points : 0
    • Joined: 2008/11/07 22:33:22
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: G2 PSU pin out 2020/07/22 09:39:55 (permalink)
    musade
    Hello, what is Green pin normal voltage ?  I read 3.97 volt.  is it normal ?
    And I read 3.97 v on Purple (Stand by) pin too . 

     

    Just had to make me break out my DMM and check, didn't you? 

    My PS_ON is 3.0V with PC off and PSU on/plugged in..Gets pulled down to 0V when PC is on.

    My +5VSB (Volts StandBy) is 5.09V with PC off and PSU on/plugged in..It remains at 5.09V with PC on.

    ATX Voltage Tolerances

    Something wrong with your PC, or not?..If so, you should start your own thread.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #7
    cobovo
    New Member
    • Total Posts : 24
    • Reward points : 0
    • Joined: 2012/02/07 01:21:12
    • Location: Kiev, Ukraine
    • Status: offline
    • Ribbons : 1
    Re: G2 PSU pin out 2024/12/04 15:30:18 (permalink)
    What do you say about this https://pc-mods.com/blogs/psu-pinout-repository/evga-psu-supernova-cables-pinout
    Look at the 18 pin PSU connector at 6 row from left side. In this tread this row not used but in this pinout diagram you can seen +12V and ground. I thought that this pins are signals pins.
    #8
    Jump to:
  • Back to Mobile