BIOS 1.12 Updates

• Improved "Auto" CPU C-State Control
• Fix TjMax Error when C1E is Enabled
• Improve 3200MHz Memory Support

  

---

 
Windows Installation

• Download the correct .zip file below for your motherboard:

         151-HE-E999-KR - EVGA X99 Classified
         150-HE-E997-KR - EVGA X99 FTW
         131-HE-E995-KR - EVGA X99 Micro

• First go into your BIOS and load defaults, save and exit
• Close all open programs.
• Go into the folder where you unzipped this package and update.bat
• Press Y to start the flash process
• DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
• After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
• NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

  
BIOS Installation

• Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
• Reboot the machine and go into the system BIOS

• From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
• Select the .bin file you wish to flash.

Hey bigs0g32. LinusTechTips actually did an overclocking guide here: http://youtu.be/Nj4ixZE7EWo :and stated that their motherboard wouldn't work at 2800 either, so it may be something else going on. They were running 2666 and we're able to go past that, but not touch 2800 if I heard him correct... Take a look at that and see if you can decipher something from it if possible.

I am curious if it is currently a limit with the RAM speed itself, along with motherboard, bios, and cpu as well...

Also, many thanks to EVGA for the quick update this round and Jacob for the post. :-)

When everything is stock.. the fps is stable... Then when I overclock I pass all stress tests (doesn't go above 80c) and it has higher benchmarks via 3Dmark.. yet lower in game?  It's puzzling.  I made quite a few posts about it here as well as screenshots.
 
http://forums.evga.com/EVGA-X99-ClassifiedFTWMicro-BIOS-109-Released-m2235617.aspx
 
About 75% down the page is my post with screenshots.

Will the E5 Xeons ever be support on these X99 board with ECC memory as well?

Jacob,  Thanks , Im so happy my ram clocked to 2800 MHz just by using xmp 2,   Ihave 2666 ram and no matter what I did I could not get it to 2800
Thanks Buddy!!!!!

would like to report back, how nice my computer runs , even with auto voltage I have a nice OC of 4.6 gig, Im on water so the temps are nice.
playing a little today and bumping up on my oc,going to try clocking ram  more with this higher OC
But as far as im concerned this is a good bios guys........

expletivedeleted
are the bios updates no longer on evga servers? or are links just broken

When I click on the links, it takes me directly to a zip file, and asks if I want to Open, Save, or Save as. If your not on IE, I would try that browser.
 
You could also go here: http://www.evga.com/community/  and click on "support", then, "drivers and bios".

Excuse me, I meant this one:
 
Vengeance® LPX 16GB (4x4GB) DDR4 DRAM 2133MHz C13 Memory Kit - Black (CMK16GX4M4A2133C13) 

gutcheck
Excuse me, I meant this one:
 
Vengeance® LPX 16GB (4x4GB) DDR4 DRAM 2133MHz C13 Memory Kit - Black (CMK16GX4M4A2133C13)
 

All of the officially tested memory is listed here.  FYI this is a MUCH better list than what was used in the X79 days, more modules and much more common.  http://www.evga.com/support/motherboard/
 
Your memory is in the list as well.
 
Also in most cases, after I post the BIOS's in the download section I get an update out for the supported memory as well.  Also with that, for those of you who haven't looked at the list in a while, I also added a new column showing what BIOS revision different RAM kits became supported with our boards.

evga24
Non ECC Ram is consumer waste..!
I hope Evga will ECC support forever
I got
4 x AD4E2133316G15
inside

When did they start supporting ECC Memory?