I been using the EVBot GPU Flasher to upload the new 980Ti Kinping rom but, after I click ok ... I get a couple of seconds of process and then black screen. The black screen keeps like that for ever. I had to reset my PC.
 
Im using an X99 Classified and a Kingpin 980Ti. The EVBot is brand new. Im running Windows 8.1 Pro.
 
Help ! 

EVGA_JacobF
For you EVBot users, we now have a way to flash EVBot using the graphics card! An EVGA motherboard is no longer required for flashing.

EVBot GPU Flash 1.0.0.2:

• Initial release

Graphics Cards Supported:

• EVGA GeForce GTX 680 Classified
• EVGA GeForce GTX 580 Classified
• EVGA GeForce GTX 285 Classified

 

---

Windows Installation

• Download the .zip file below:

        

• Connect the EVBot cable to the MB port located on the EVBot device.
• Connect the other end of the EVBot cable to your graphics card.
• Extract contents of above .zip file and run EVBotFlashTool.exe
• Select the bundled .hex file for flashing.

• Hold down the EVBot POWER button for 7 seconds until you see the EVBot screen display FLASH MODE.

• Click OK in EVBot Flash Tool to being the flashing process.
• After flash is complete, unplug EVBot, then plug it back in to any EVBot port.

Warning:
**Do not restart or interrupt your PC while the flash is ongoing

 
Jacob, could you please possibly help why the flash tool says device not supported when I try to flash via gtx 285 classified? It doesn't open the program and brings that message straight up.

Can anyone tell me why I would need this UEFI bios flash?  Is it for the GPU card, or for the motherboard?  I have a GTX-690 on an MSI motherboard.