EVGA

FTW-k x99 and corsair 32gb 3200mhz wont boot manualy and with xmp profil 1

Author
dekoproject
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2011/01/15 18:34:43
  • Status: offline
  • Ribbons : 0
2017/03/19 15:22:57 (permalink)
Well like the title say it wont boot .. even if i set them manualy it dont show in window i can get up to 2800 but it show 2133mhz in window and 1330.2mhz in cpu-z

spec ;

window 7 64bit
evga ftw-k x99
corsair hx1000w power supply
intel 6800k cpu with EK evo supremacy x99 full nickel
evga 980 gtx classifed
ocz m.2 ssd for window 256gb and 1tb WDB

and 32gb of corsair dominator 3200mhz ( cmd32gx4m4b3200c16 )

I bought them because 3 or 4 guys on the forums was able to run them out of the box at 3200mhz

Bios is updated !

i can easly run at 4.2ghz with 1.31v on the cpu need to do some stress test too on the cpu but idle temps is 19'c idle and 35'c full load

i can post screeenshot too if it can help
#1

4 Replies Related Threads

    EVGATech_MDecker
    EVGA Tech Support
    • Total Posts : 1794
    • Reward points : 0
    • Joined: 2015/09/21 17:32:43
    • Location: RwlRwlRwlRwl
    • Status: offline
    • Ribbons : 7
    Re: FTW-k x99 and corsair 32gb 3200mhz wont boot manualy and with xmp profil 1 2017/03/19 15:33:32 (permalink)
    Hello,
     
    if you are enabling XMP be sure to reset all overclocks in terms of All core and BCLK and then reconfigure before saving Bios.
     
    The XMP profile is likely overriding your CPU overclock and changing settings that may not be stable.

    Have a moment? Please rate our service 

    (つ◕౪◕)つ━☆゚.*・。゚X99Micro2 | 5960X | 1080Ti 。゚・*.☆゚
    #2
    dekoproject
    New Member
    • Total Posts : 5
    • Reward points : 0
    • Joined: 2011/01/15 18:34:43
    • Status: offline
    • Ribbons : 0
    Re: FTW-k x99 and corsair 32gb 3200mhz wont boot manualy and with xmp profil 1 2017/03/19 15:55:13 (permalink)
    well im not even able to make run the xmp profil alone even if i dont touch the cpu and anything it just dont post if i use xmp profile 1 .. profile no2 is not suported so for now im running 3200mhz ram at 2133mhz
    #3
    EVGATech_MDecker
    EVGA Tech Support
    • Total Posts : 1794
    • Reward points : 0
    • Joined: 2015/09/21 17:32:43
    • Location: RwlRwlRwlRwl
    • Status: offline
    • Ribbons : 7
    Re: FTW-k x99 and corsair 32gb 3200mhz wont boot manualy and with xmp profil 1 2017/03/19 16:23:20 (permalink)
    dekoproject
    well im not even able to make run the xmp profil alone even if i dont touch the cpu and anything it just dont post if i use xmp profile 1 .. profile no2 is not suported so for now im running 3200mhz ram at 2133mhz




    Hello,
     
    that is because the memory controller is located on the CPU and without overclocking + added voltage you are very unlikely to achieve that memory frequency. Simply setting the XMP will not yield the results you want. Further tweaking of the voltages and frequency of the CPU will be required.

    Have a moment? Please rate our service 

    (つ◕౪◕)つ━☆゚.*・。゚X99Micro2 | 5960X | 1080Ti 。゚・*.☆゚
    #4
    GTXJackBauer
    CLASSIFIED Member
    • Total Posts : 2704
    • Reward points : 0
    • Joined: 2010/04/19 22:23:25
    • Location: U.S.A
    • Status: offline
    • Ribbons : 13
    Re: FTW-k x99 and corsair 32gb 3200mhz wont boot manualy and with xmp profil 1 2017/03/19 21:44:12 (permalink)
    As TechDecker said, try setting up your RAM manually.

         
    #5
    Jump to:
  • Back to Mobile