Ryuunbi
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2018/11/24 00:20:17
- Status: offline
- Ribbons : 0
Hello, I'm suffering a problem on booting. I assembled my new computer. But when I power on the computer, mainboard shows d6 error code with 5beeps. I reseted CMOS but it was same. I think graphic card is not problem. Because 2 different graphic cards suffer same problem. I exchanged mainboard to new one. But it was same. I couldn't enter bios. Because monitor shows 'no signal'..... My system is CPU : G4900 (for updating bios to use 9600k) Mainboard :EVGA Z370 Micro VGA : EVGA RTX 2070 XC Gaming RAM : Samsung DDR4 8GB X2 POWER : FSP Hyper K 700W 80Plus Standard 230V EU SSD : Samsung 860 EVO 250GB What can I do? I want to enter bios.... Help me
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/04 01:25:12
(permalink)
Welcome on EVGA Community. Wait little until people with same board recognize what could be problem. Did you connect power cables to graphic card nicely and how you connect VGA with monitor? How old is that power supply, 700W? To be honest for 9600K and 2070 GPU I would use EVGA Gold 750W PSU. You now how that PSU is below other components you use. It's not even Bronze efficiency.
post edited by Vlada011 - 2018/12/04 01:30:27
|
Ryuunbi
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2018/11/24 00:20:17
- Status: offline
- Ribbons : 0
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/04 02:22:29
(permalink)
Umm.... I connected VGA Power 8pin and 6pin well and connected monitor using HDMI cable. And power is new one which manufactured on August 2018.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/04 02:37:58
(permalink)
It's brand new or you use him before, because looks like not detect GPU because some reasons and If you say it's same with other GPU maybe power to GPU is not good. You should try and second PCI-E slot just in case, but I think it's something connected with GPU.
|
Ryuunbi
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2018/11/24 00:20:17
- Status: offline
- Ribbons : 0
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/04 02:58:16
(permalink)
RTX 2070 is brand new one and the other one is GTX 650 which was in my last computer. I tried second PCI-E slot but it was same. When I power up the computer, led and fans of graphic card were operated. Is it the problem of power? If it is the problem of power, I will change power to different one and try again.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/04 11:48:14
(permalink)
Will the system post on integrated graphics with the gpu completely removed from the system?
|
mouacyk
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2008/07/22 08:59:36
- Status: offline
- Ribbons : 1
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/10 13:09:16
(permalink)
Sajin Will the system post on integrated graphics with the gpu completely removed from the system?
There is no integrated graphics on this motherboard. Try only 1 ram stick for now. Also, I do not see G4900 on list of supported CPUs.
i9- 9900K@5.2GHz@1.304v / 2x16GB-3900 C15-2T-1.45v / Z370 Micro / RTX3 080 / SS- X850W-G / 480mm Custom H20 + Raystorm Pro / XB271HU
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/10 14:36:15
(permalink)
mouacyk
Sajin Will the system post on integrated graphics with the gpu completely removed from the system?
There is no integrated graphics on this motherboard.
Try only 1 ram stick for now. Also, I do not see G4900 on list of supported CPUs.
Appears you're correct. The op is using a 9600k.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49126
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/10 14:36:21
(permalink)
@Ryuunbi The computer works just fine with the G4900 installed? If yes, it sounds like you got a bad cpu.
|
mouacyk
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2008/07/22 08:59:36
- Status: offline
- Ribbons : 1
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/10 14:42:04
(permalink)
Is the CPU 8-pin EPS cable plugged into the motherboard?
i9- 9900K@5.2GHz@1.304v / 2x16GB-3900 C15-2T-1.45v / Z370 Micro / RTX3 080 / SS- X850W-G / 480mm Custom H20 + Raystorm Pro / XB271HU
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/10 15:47:07
(permalink)
ASUS BIOS Flashback is good, you only need to remove all USB devices external HDDs, Internet Cable, shut down computer, remove CPU, Memory, GPU and left connected only motherboard to PSU install USB Flash with BIOS File and press button on back side of mobo. And flash will start to blink 2-3 minutes while motherboard install BIOS. Only mobo, PSU and Flash Memory. If you BIOS not support your new processor and you don't have older version is easy to resolve because you don't need CPU to install BIOS.
|
mouacyk
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2008/07/22 08:59:36
- Status: offline
- Ribbons : 1
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/10 19:26:26
(permalink)
That only works on supported Asus boards.
i9- 9900K@5.2GHz@1.304v / 2x16GB-3900 C15-2T-1.45v / Z370 Micro / RTX3 080 / SS- X850W-G / 480mm Custom H20 + Raystorm Pro / XB271HU
|
Ryuunbi
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2018/11/24 00:20:17
- Status: offline
- Ribbons : 0
Re: EVGA Z370 Micro d6 error and 5beeps
2018/12/10 23:54:19
(permalink)
I think that's because my motherboard doesn't support g4900. Thank you for helping.
|