EVGA

Helpful ReplyLockedEVGA Thermal Pad Width for GPU's

Author
NordicJedi
EVGA Forum Moderator
  • Total Posts : 12570
  • Reward points : 0
  • Joined: 2007/07/16 21:05:08
  • Status: offline
  • Ribbons : 77
2011/10/26 00:23:53 (permalink)
http://www.evga.com/support/faq/?f=59314
 
For any of you wondering, thermal pad width is 0.5mm for all of the EVGA graphics cards.  Any 0.5mm thermal pad you can find at places like FrozenCPU.com will work fine, if you need another.
 
This is only for graphics cards, not motherboards.  I'll leave this here for now, and later sticky it.

6012mhz on L/N2 
5321mhz on L/N2
5091mhz on air
The Lightsaber
The Emperor Reborn
#1
JGLuxe
CLASSIFIED ULTRA Member
  • Total Posts : 7192
  • Reward points : 0
  • Joined: 2010/10/26 03:19:09
  • Location: Cloud 9
  • Status: offline
  • Ribbons : 17
Re:EVGA Thermal Pad Width for GPU's 2011/10/26 00:26:07 (permalink)
Why not edit the link into this :
 
http://forums.evga.com/tm.aspx?m=574023

i9-12900ks @ | 128GB DDR4 | RTX 3090 FTW3 ULTRA
 
 
#2
NordicJedi
EVGA Forum Moderator
  • Total Posts : 12570
  • Reward points : 0
  • Joined: 2007/07/16 21:05:08
  • Status: offline
  • Ribbons : 77
Re:EVGA Thermal Pad Width for GPU's 2011/10/26 00:42:22 (permalink)
I may in the future.  For now, I'd rather people see it first.  Later on, it will likely be relegated to that thread.

6012mhz on L/N2 
5321mhz on L/N2
5091mhz on air
The Lightsaber
The Emperor Reborn
#3
KaptCrunch
Superclocked Member
  • Total Posts : 126
  • Reward points : 0
  • Joined: 2010/07/10 09:35:00
  • Status: offline
  • Ribbons : 1
Re:EVGA Thermal Pad Width for GPU's 2012/01/10 06:04:12 (permalink)
your looking for .020 inch thick pad
#4
hero4682
New Member
  • Total Posts : 43
  • Reward points : 0
  • Joined: 2009/10/25 12:20:14
  • Location: Downey, CA
  • Status: offline
  • Ribbons : 0
Re:EVGA Thermal Pad Width for GPU's 2012/03/22 11:48:53 (permalink)
good to know....

i7 920 @2.8/ evga x58/ evga gtx480/ 6gb corsair xms3 @1600/ corsair tx750w psu/
prolimatech megahelams/ antec 1200/win7 64/
#5
gamecrazeddork
iCX Member
  • Total Posts : 375
  • Reward points : 0
  • Joined: 2012/08/19 16:22:03
  • Status: offline
  • Ribbons : 2
Re:EVGA Thermal Pad Width for GPU's 2012/08/20 13:36:43 (permalink)
Hmm ok


#6
mzy524
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2013/05/15 12:52:55
  • Status: offline
  • Ribbons : 0
Re:EVGA Thermal Pad Width for GPU's 2013/05/22 21:18:53 (permalink)
Summer is coming and I am thinking about water cooling

  
 
#7
gavros777
Superclocked Member
  • Total Posts : 109
  • Reward points : 0
  • Joined: 2012/01/03 08:04:24
  • Status: offline
  • Ribbons : 0
Re:EVGA Thermal Pad Width for GPU's 2013/12/08 06:07:43 (permalink)
thanks for the info
#8
HayzBaby
iCX Member
  • Total Posts : 483
  • Reward points : 0
  • Joined: 2010/05/04 13:06:31
  • Status: offline
  • Ribbons : 4
Re:EVGA Thermal Pad Width for GPU's 2014/07/09 16:09:54 (permalink)
Does using 1.0mm pads hurt? I bought some really quality stuff, some of the best thermal pads on the market. But not really noticing a difference. Might buy some .5mm and swap out the 1mm and see if its any better
#9
Vegas82
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2014/10/22 13:09:18
  • Status: offline
  • Ribbons : 0
Re:EVGA Thermal Pad Width for GPU's 2014/10/22 13:11:42 (permalink)
Thickness and width are two different things.
#10
jonkrmr
SSC Member
  • Total Posts : 952
  • Reward points : 0
  • Joined: 2006/09/19 13:05:11
  • Location: California USA
  • Status: offline
  • Ribbons : 16
Re:EVGA Thermal Pad Width for GPU's 2015/07/24 07:54:30 (permalink)
HayzBaby
Does using 1.0mm pads hurt? I bought some really quality stuff, some of the best thermal pads on the market. But not really noticing a difference. Might buy some .5mm and swap out the 1mm and see if its any better

Yes. You need to use the correct thickness pads. Thicker pads will prevent the cooler stand-offs from seating correctly to the PCB and could cause physical damage to the PCB and components soldered to it. The thermal pads will compress a little but not enough to squish down to the proper thickness needed. Using thicker than recommended pads can also cause the cooler to not make good proper contact with the GPU die causing elevated temps on the GPU.

Intel i9-10850K @ 5 GHz
MSI MEG Z490 Unify
Corsair Vengeance RGB RT 32GB 3600MHz DDR4
ASUS Strix RTX 3080 OC 12GB Gaming @ 2175 MHz core - peak \ 20004 MHz mem
Samsung 970 EVO Plus 500GB NVMe M.2 SSD
2x Samsung 970 EVO Plus 2TB NVMe M.2 SSD RAID 0
SoundBlasterX AE-5 
EVGA SuperNova 1000 P2
Corsair Obsidian 500D SE
Custom water cooling on CPU & GPU
Acer XV272U 27" 2k 170Hz
#11
snapbeaver
New Member
  • Total Posts : 87
  • Reward points : 0
  • Joined: 2015/11/10 14:08:47
  • Status: offline
  • Ribbons : 2
Re:EVGA Thermal Pad Width for GPU's 2016/07/24 05:28:42 (permalink)
well no..
 
TS > 0,5mm, No thats wrong, its 1mm sticky pads
 
i swapped my 980ti classy pads a month ago. and i used 1mm sticky as an replacement
 
get thermalpads from ebay instead  (blue or green OEM)  100mm X 100mm  for a dollar or so, and save a fortune
 
Dont buy from shops like frozencpu
 

post edited by snapbeaver - 2016/07/24 05:40:20

Attached Image(s)




#12
vaptor
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2009/01/18 07:49:55
  • Status: offline
  • Ribbons : 0
Re:EVGA Thermal Pad Width for GPU's 2016/11/21 10:28:12 (permalink)
Which thickness have the pads for the gtx 1080 thermal mod? I will get an evga gtx 1080 ftw for xmas. Just want to buy some pads to be ready for mod on xmas. Cause evga needs the serial no. for sending the pads, which I dont have before xmas.

Intel Core i7-860 | G.Skill RipJaws X 8GB PC3-12800U | EVGA GeForce GTX 570 & TR Shaman & TR VRM G2 & Scythe Slip Stream PWM | Zalman CNPS 10x Quiet & Scythe Slip Stream PWM | MSI P55-GD65 | Super Talent Ultradrive GX MLC 128GB | Be Quiet Dark Power Pro P9 550W | Lian Li PC-7FN & be quiet Silent Wings USC 120mm | controlled by Speedfan & MSI Afterburner | utilized by Windows 7 64bit
#13
EVGATech_ChrisB
EVGA Tech Support
  • Total Posts : 2032
  • Reward points : 0
  • Joined: 2007/05/14 16:19:27
  • Status: offline
  • Ribbons : 1
Re:EVGA Thermal Pad Width for GPU's 2016/11/21 12:23:42 (permalink) ☄ Helpfulby Cool GTX 2019/10/30 09:46:00
Hi,
 
I am sorry for any confusion as the cards with 1MM thickness on the thermal pads are prior to the 10 series line of EVGA graphics cards.  I can confirm that the thickness of the thermal pads may change from model to model and due to this we do recommend requesting a free thermal pad mod from http://www.evga.com/thermalmod/.



#14
seth89
CLASSIFIED ULTRA Member
  • Total Posts : 5290
  • Reward points : 0
  • Joined: 2007/11/13 11:26:18
  • Status: offline
  • Ribbons : 14
Re:EVGA Thermal Pad Width for GPU's 2017/09/04 21:26:37 (permalink)
The thermal pads that came with my EKWB gear is awesome.
Cooling three R9 290s from 2013 to 2017 and they were still nice and soft, performance was the same too.


#15
Hicad1982
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2019/01/31 08:22:53
  • Status: offline
  • Ribbons : 0
Re:EVGA Thermal Pad Width for GPU's 2019/02/19 16:23:22 (permalink)
thanks man you're a life saver lol.
#16
bp7178
iCX Member
  • Total Posts : 373
  • Reward points : 0
  • Joined: 2016/04/15 15:24:51
  • Status: offline
  • Ribbons : 3
Re:EVGA Thermal Pad Width for GPU's 2020/01/22 19:35:47 (permalink)
Hicad1982
thanks man you're a life saver lol.




The OP is very old and should NOT be relied upon for cards made since then. 
#17
Cool GTX
EVGA Forum Moderator
  • Total Posts : 30969
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Folding for the Greater Good
  • Status: offline
  • Ribbons : 122
Re:EVGA Thermal Pad Width for GPU's 2020/01/23 09:24:12 (permalink)
Many of the newer GPUs (10 series & newer) use several different thicknesses of thermal pads
 
Best to Ask about your specific Card in the Correct section of the Forums   https://forums.evga.com/EVGA-Graphics-Cards-f5.aspx
 
or Call EVGA CS
 
 
 
Locking Thread ... FAQ link by OP is broken anyways

Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

I am a Volunteer Moderator - not an EVGA employee

https://foldingathome.org -->become a citizen scientist and contribute your compute power to help fight global health threats

RTX Project EVGA X99 FTWK Nibbler EVGA X99 Classified EVGA 3080Ti FTW3 Ultra


#18
Jump to:
  • Back to Mobile