EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Release: 11/10/2021 - This release addresses some QoL issues related to the new VF Curve update. Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS. Just a PSA.... - Clip VF Curve area
- Show 0 in Y-Axis of Clock offset mode 2
- Update VF Curve tooltip
https://www.evga.com/precisionx1/Please let us know if you run into any issues.
|
bwmeyer96
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2020/10/03 14:54:14
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/10 12:13:32
(permalink)
A way to flatten a curve for undervolting would be much appreciated, then it would be nearly on par with afterburner!
|
dl_unlimited
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2009/07/15 05:06:33
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/10 17:55:34
(permalink)
Temp mode still randomly resetting to rainbow and flicking back to temp mode after a few seconds.
|
nirvashone
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2010/10/09 10:26:15
- Location: Disney World
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 1.2.8.0
2021/11/11 05:32:30
(permalink)
GPU will not idle. mem and core at non turbo maximum. task manager reports 3% usage. EDIT* seems to be an issue with windows update KB5007186
post edited by nirvashone - 2021/11/11 06:08:06
|
neteng101
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2018/02/03 06:56:57
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 1.2.8.0
2021/11/11 05:58:21
(permalink)
VF curve still needs work but getting there. Granular control with arrow keys to move a selection up/down by 1 MHz steps would help. For this to work we would need to be able to select a control point within a selection - turn the dot red and start showing the offset for the control point, then arrow keys can be used to manipulate the offset based on the selected point in the selection.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA Precision X1 1.2.8.0
2021/11/11 06:08:23
(permalink)
nirvashone GPU will not idle. mem and core at non turbo maximum. task manager reports 3% usage
Make sure that NVidia control panel is not set to maximum performance in global settings. If it is, the GPU will never idle, it will stay at NVidia turbo settings.
|
rottentreats
Superclocked Member
- Total Posts : 242
- Reward points : 0
- Joined: 2011/10/07 23:54:35
- Status: offline
- Ribbons : 6
Re: EVGA Precision X1 1.2.8.0
2021/11/11 11:53:49
(permalink)
Am I the only one that would like an option to opt-in (opt-out would be ok too) to desktop shortcut creation for "EVGA Precision X1' when installing? I know there are bigger fish to fry in the defect/enhancement queue but many people do not like something like that forced upon them. I just SHIFT+DEL the icon and yell "DID I EVEN ASK FOR THIS?!" then I laugh and continue my day but seriously don't be like this. I suppose I could just always have the icon hidden on my desktop and then I'll hardly ever see it but that's pretty lame.
GPU: EVGA GeForce RTX 3080 Ti FTW3 ULTRA HYBRID
|
sidm2k17
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/03/09 19:59:50
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/11 12:14:23
(permalink)
would not start for me after update, went back to afterburner.
|
TERMiNAL_
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2021/09/09 09:10:52
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/11 14:46:01
(permalink)
every time i open the VF curve now my monitor flickers turns off/on... this didn't happen yesterday so i'm confused, i didn't change anything else... i'm running the latest version of x1...
|
Hoggle
EVGA Forum Moderator
- Total Posts : 10084
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: EVGA Precision X1 1.2.8.0
2021/11/11 15:44:25
(permalink)
Works like expected for me on Windows 11.
|
gt420cool
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2017/04/25 00:37:01
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/11 23:35:31
(permalink)
loading a profile crashes or closes the program since update.
|
jcapcik
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2013/12/11 20:23:31
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/12 20:28:27
(permalink)
Since installing, the LED settings default to Static Off when the app first loads. I had not experienced this with v1.2.6. I'm now trying v1.2.7 to see if that resolves it.Never mind, it seems this is discussed in another thread and unrelated to this update.
post edited by jcapcik - 2021/11/12 20:34:59
|
nirvashone
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2010/10/09 10:26:15
- Location: Disney World
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 1.2.8.0
2021/11/13 03:11:13
(permalink)
the_Scarlet_one
nirvashone GPU will not idle. mem and core at non turbo maximum. task manager reports 3% usage
Make sure that NVidia control panel is not set to maximum performance in global settings. If it is, the GPU will never idle, it will stay at NVidia turbo settings.
power settings are set to normal, even reinstalled the drivers. still maxxed out *EDIT* I also started to get random OS hard locks too. I uninstalled the windows update, back to normal now.
post edited by nirvashone - 2021/11/13 03:29:59
|
nezff
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2012/08/20 16:36:53
- Location: Cajun Country
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 1.2.8.0
2021/11/17 11:15:04
(permalink)
Is there a reason why the Hardware monitoring doesnt show in battlefield 2042? No fps etc..
Use my Associates code at checkout and get up to 10% off! 95M1DJFALLX3K3L i7 11700k * Asus ROG Strix z590a WiFi * EVGA 3080 FTW3 Ultra * 32GB Corsair 3200Mhz * Samsung 970 Pro 512GB & 970 Evo Plus 1TB M.2 * Samsung 860 Evo SSD 1TB & 2TB * Lian Li Dynamic white * Corsair QL fans x9 * Corsair H150i Pro XT * Corsair Rm1000x * Samsung G7 Faker 1440p 27"
|
chaitu87
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2013/11/19 19:17:09
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/17 11:22:29
(permalink)
sidm2k17 would not start for me after update, went back to afterburner.
Came here to post this very thing. The latest geforce driver update bungled my precisionx. Tried DDU and various registry fixes and no luck. Only way for me now is via afterburner. I'm running a FTW3 3080Ti and Windows 11 if it helps.
|
BizSAR
EGC Lead Admin / EVGA Forum Moderator
- Total Posts : 1711
- Reward points : 0
- Joined: 2007/07/13 00:27:46
- Location: Oregon, USA
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/18 13:58:51
(permalink)
Running the latest Nvidia driver (496.84HF), Win11 pro build 22000.346, & PX1 1.2.8. Starting here just fine on a 3070Ti FTW3.
BizSAR EVGA 3090Ti FTW3 Ultra / ZOTAC 4070Ti Trinity OC - ASUS ROG PG279QM
|
nezff
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2012/08/20 16:36:53
- Location: Cajun Country
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 1.2.8.0
2021/11/18 14:07:59
(permalink)
No problem of it running, but its not showing up in bf2042.
Use my Associates code at checkout and get up to 10% off! 95M1DJFALLX3K3L i7 11700k * Asus ROG Strix z590a WiFi * EVGA 3080 FTW3 Ultra * 32GB Corsair 3200Mhz * Samsung 970 Pro 512GB & 970 Evo Plus 1TB M.2 * Samsung 860 Evo SSD 1TB & 2TB * Lian Li Dynamic white * Corsair QL fans x9 * Corsair H150i Pro XT * Corsair Rm1000x * Samsung G7 Faker 1440p 27"
|
BizSAR
EGC Lead Admin / EVGA Forum Moderator
- Total Posts : 1711
- Reward points : 0
- Joined: 2007/07/13 00:27:46
- Location: Oregon, USA
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/11/18 15:06:15
(permalink)
BizSAR EVGA 3090Ti FTW3 Ultra / ZOTAC 4070Ti Trinity OC - ASUS ROG PG279QM
|
SeanAngelo
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2015/03/31 09:24:24
- Location: United Kingdom
- Status: offline
Re: EVGA Precision X1 1.2.8.0
2021/11/19 04:15:06
(permalink)
Still needs some work for undervolting to get it on par with MSI AB. Get it similar to MSI AB and maybe I'll start using PX1 for my 3080 FTW3 instead of using MSI AB for my EVGA GPU.
My Affiliate Code: N2BY175XVN Associate Code: AZQPV2HAL3YUGND
|
Squall_Rinoa86
FTW Member
- Total Posts : 1735
- Reward points : 0
- Joined: 2010/07/26 14:09:48
- Location: The Empire State -> Hyde Park
- Status: offline
- Ribbons : 5
Re: EVGA Precision X1 1.2.8.0
2021/11/28 20:49:08
(permalink)
My 3080 FTW3 refuses to save LED Color... It's literally stuck on Blue.. I've tried multiple times of changing it to red.. rebooting.. and it STILL reboots in Blue! WTH!
PSU: EVGA SuperNOVA 1300 G2 My Affiliate Code: AN1FW0VMG6
|
Chriscom_EVGA
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2011/04/03 17:10:56
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.2.8.0
2021/12/01 16:34:58
(permalink)
Since version 1.2.7 PX1 crashes upon the launch of the program when "apply previous settings on load" is enabled or when I load a saved profile. Deleting the config file temporarily fixes the crashing until I select one of the two crash triggering options mentioned. Windows 11 22000.348 with a GTX 980 SC ACX2.0. Superseeded version 1.2.6 works as expected. Its a very annoying issue and a quick fix would be much appreciated!
post edited by Chriscom_EVGA - 2021/12/01 16:36:07
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA Precision X1 1.2.8.0
2021/12/02 09:21:48
(permalink)
rottentreats Am I the only one that would like an option to opt-in (opt-out would be ok too) to desktop shortcut creation for "EVGA Precision X1' when installing? I know there are bigger fish to fry in the defect/enhancement queue but many people do not like something like that forced upon them. I just SHIFT+DEL the icon and yell "DID I EVEN ASK FOR THIS?!" then I laugh and continue my day but seriously don't be like this. I suppose I could just always have the icon hidden on my desktop and then I'll hardly ever see it but that's pretty lame.
We're also looking into the other issues people have reported over the last few releases, but I can confirm we're going to take care of this problem.
|