chris.marston
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2014/10/25 11:40:08
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/21 15:44:48
(permalink)
EVGA RTX2080TI FTW3 Ultra
Precision X1 1.1.1.0
Driver 457.30
Reset to default. Run SCAN. Progress bar does not move (0%), 15 seconds... Test Result FAIL every time. Closed all background processes possible as the program requests.
Anyone else?
|
hunter-IV
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2018/07/18 07:33:22
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/21 16:15:03
(permalink)
I installed my 3080 and installed the most recent version of X1. If I leave X1 running when I put my PC to sleep, the PC doesn't wake and instead reboots. Reinstalling the GPU driver and X1 did not help. Is it worth trying 1.1.0.11 or should I just wait for a new update?
|
exilelrrp
iCX Member
- Total Posts : 411
- Reward points : 0
- Joined: 2007/02/19 11:00:23
- Location: BX INF
- Status: offline
- Ribbons : 1
Re: EVGA Precision X1 1.1.1
2020/11/25 01:58:07
(permalink)
Here we go again with EVGA and their  PX1, right when I was about to download the software I said to myself, let me check the forum, and here we are! Nothing has changed for the better in years with this PX... I just want to change the RGB to a static color and I'm afraid that EVGA's PX will cause some issue with my system....The Saga Continues!
*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate. 
|
dc8flyer
SSC Member
- Total Posts : 558
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: EVGA Precision X1 1.1.1
2020/11/25 07:09:53
(permalink)
Hopefully a new X1 version will be released soon.
If so, please check the bug that occurs after you initially open X1. As soon as it is open I would select "Apply" and this would immediately deselect my fan curve and the RPMs shown in the lower left front page would drop to zero.
You then have to go to the fan curve page and select the fan curve control button, go back to front page and select Apply/Save to re-engage the fan curve.
Thanks.
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 456.55 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
SpinCykle
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2011/07/23 13:55:26
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/25 13:14:45
(permalink)
Can anyone help. PX1 1.1.1 crashes instantly up startup on my bench system w/ RTX 2080 Ti Kingpin. I've tried uninstalling, reinstalling, DDU and trying to edit the user config file for auto update and nothing works. Super frustrating! I'm running the latest NVIDIA drivers 457.30.
Second system, PX1 1.1.1 w/ 1080 Ti Kingpin, PX1 launches however, voltage control is no existent, slider is a placebo and will never boost over 1.05v w/ on OC bios. Switching BIOS's causes PX1 to incorrectly read Power Target limits and default fan curve profiles. Also running Nvidia 457.30 drivers....
|
TwoEvilOne
SSC Member
- Total Posts : 716
- Reward points : 0
- Joined: 2018/06/12 10:55:57
- Location: NW Ohio. EVGA Associate Code: 2QME1VF65K9ZY8B
- Status: offline
- Ribbons : 4
Re: EVGA Precision X1 1.1.1
2020/11/25 13:25:24
(permalink)
SpinCykle
Can anyone help. PX1 1.1.1 crashes instantly up startup on my bench system w/ RTX 2080 Ti Kingpin. I've tried uninstalling, reinstalling, DDU and trying to edit the user config file for auto update and nothing works. Super frustrating! I'm running the latest NVIDIA drivers 457.30.
Second system, PX1 1.1.1 w/ 1080 Ti Kingpin, PX1 launches however, voltage control is no existent, slider is a placebo and will never boost over 1.05v w/ on OC bios. Switching BIOS's causes PX1 to incorrectly read Power Target limits and default fan curve profiles. Also running Nvidia 457.30 drivers....
I have the same crash with PX1 1.1.1 on the kingpin 2080 ti, i went back to PX1 1.1.0.11 and all is good. PX1 download here, older versions too https://www.evga.com/precisionx1/
|
SpinCykle
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2011/07/23 13:55:26
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/25 13:35:38
(permalink)
TwoEvilOne
SpinCykle
Can anyone help. PX1 1.1.1 crashes instantly up startup on my bench system w/ RTX 2080 Ti Kingpin. I've tried uninstalling, reinstalling, DDU and trying to edit the user config file for auto update and nothing works. Super frustrating! I'm running the latest NVIDIA drivers 457.30.
Second system, PX1 1.1.1 w/ 1080 Ti Kingpin, PX1 launches however, voltage control is no existent, slider is a placebo and will never boost over 1.05v w/ on OC bios. Switching BIOS's causes PX1 to incorrectly read Power Target limits and default fan curve profiles. Also running Nvidia 457.30 drivers....
I have the same crash with PX1 1.1.1 on the kingpin 2080 ti, i went back to PX1 1.1.0.11 and all is good.
PX1 download here, older versions too https://www.evga.com/precisionx1/
Thank you. Any trouble when switching between BIOS’s with fan curve control or voltage control? Have you used the classified tool with 1.1.0.11? Any issues?
|
reinvented
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2006/05/22 13:18:49
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/26 12:02:43
(permalink)
Just reporting that version 1.1.1 causes Max Frame rate to become disabled in the NVCP on reboot, or game exit. And this happens with ANY game. DX9-DX12, etc. Ended up going back to 1.1.0.11 and everything is working as it should be.
|
parasitegod
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2014/07/25 13:49:26
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/27 01:08:16
(permalink)
dc8flyer
Hopefully a new X1 version will be released soon.
If so, please check the bug that occurs after you initially open X1. As soon as it is open I would select "Apply" and this would immediately deselect my fan curve and the RPMs shown in the lower left front page would drop to zero.
You then have to go to the fan curve page and select the fan curve control button, go back to front page and select Apply/Save to re-engage the fan curve.
Thanks.
Thank you for pointing that out! Now I know how to actually make these curves work in this damn program.
|
dc8flyer
SSC Member
- Total Posts : 558
- Reward points : 0
- Joined: 2016/02/23 00:10:47
- Status: offline
- Ribbons : 7
Re: EVGA Precision X1 1.1.1
2020/11/28 05:57:10
(permalink)
parasitegod
dc8flyer
Hopefully a new X1 version will be released soon.
If so, please check the bug that occurs after you initially open X1. As soon as it is open I would select "Apply" and this would immediately deselect my fan curve and the RPMs shown in the lower left front page would drop to zero.
You then have to go to the fan curve page and select the fan curve control button, go back to front page and select Apply/Save to re-engage the fan curve.
Thanks.
Thank you for pointing that out! Now I know how to actually make these curves work in this damn program.
Well, the issue was not corrected with the new version 1.12
2009 Alienware Aurora x58 i7 990x oc to 4.14 Three ASUS ROG PG278Q Black 27" WQHD 2560 x 1440 - 144 Hz 1ms (GTG) NVIDIA G-Sync Gaming Monitors RTX 2080ti EVGA Black XC oc 1250/160 with 456.55 CORSAIR Vengeance 24GB (6 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 memory 2TB 860evo SSD Corsair Hydro Series H80i V2 Water/Liquid CPU Cooler Two 120mm push/pull NF-F12 iPPC-3000 PWM Fan with Focused Flow Windows 10 - always the latest
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 6116
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 1.1.1
2020/11/28 10:49:31
(permalink)
LED settings stay thru reboot with this new version. Win for me
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
sjpatter86
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/10/05 19:49:22
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/29 20:41:12
(permalink)
transdogmifier
LED settings stay thru reboot with this new version. Win for me
My color settings stick but the brightness and speed settings do not. Which is annoying because the 3080 LEDs are significantly brighter than everything else in my system so it doesn't match. When I lower the brightness, the color matches. But with brightness almost maxed it doesn't match at all.
|
falcon413
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2018/11/14 15:53:39
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/11/30 11:39:27
(permalink)
hunter-IV
I installed my 3080 and installed the most recent version of X1. If I leave X1 running when I put my PC to sleep, the PC doesn't wake and instead reboots. Reinstalling the GPU driver and X1 did not help. Is it worth trying 1.1.0.11 or should I just wait for a new update?
Same thing happens to me. I narrowed it down to the PX1 Fan Curve Control. Whenever this is enabled it'll cause the display driver to crash upon system wake, and the entire PC will reboot if it can't recover the driver. I can replicate this on my system 100% of the time. I've uninstalled/reinstalled drivers (using DDU), completely removed PX1 and reinstalled, and it still happens. At this point I'm only using PX1 to monitor temps since OC Scan, VF Curve and Fan Curve Control are all broken. 1.1.0.11 was not playing nice with 457.30 drivers on my end. Fans were acting up, so I updated to 1.1.1 for that reason.
|
hunter-IV
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2018/07/18 07:33:22
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/01 04:48:13
(permalink)
falcon413
hunter-IV
I installed my 3080 and installed the most recent version of X1. If I leave X1 running when I put my PC to sleep, the PC doesn't wake and instead reboots. Reinstalling the GPU driver and X1 did not help. Is it worth trying 1.1.0.11 or should I just wait for a new update?
Same thing happens to me. I narrowed it down to the PX1 Fan Curve Control. Whenever this is enabled it'll cause the display driver to crash upon system wake, and the entire PC will reboot if it can't recover the driver. I can replicate this on my system 100% of the time. I've uninstalled/reinstalled drivers (using DDU), completely removed PX1 and reinstalled, and it still happens. At this point I'm only using PX1 to monitor temps since OC Scan, VF Curve and Fan Curve Control are all broken.
1.1.0.11 was not playing nice with 457.30 drivers on my end. Fans were acting up, so I updated to 1.1.1 for that reason.
Yeah, I figured out that it was the fan curve, too. So I am just not using PX1 for fan control until this problem is corrected. Still using Afterburner for undervolting without issue, though.
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 6116
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 1.1.1
2020/12/01 05:04:01
(permalink)
sjpatter86
transdogmifier
LED settings stay thru reboot with this new version. Win for me
My color settings stick but the brightness and speed settings do not. Which is annoying because the 3080 LEDs are significantly brighter than everything else in my system so it doesn't match. When I lower the brightness, the color matches. But with brightness almost maxed it doesn't match at all.
Just tried this...same for me...the speed and brightness settings don't stick.
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
Mkilbride2599
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2007/12/22 21:31:30
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/02 05:40:08
(permalink)
My issue is that one of my fans is running at 1500RPM. I can't change it. I can only control two. I've been hearing about it since launch...
post edited by Mkilbride2599 - 2020/12/02 05:44:50
|
aka_STEVE_b
EGC Admin
- Total Posts : 17692
- Reward points : 0
- Joined: 2006/02/26 06:45:46
- Location: OH
- Status: offline
- Ribbons : 69
Re: EVGA Precision X1 1.1.1
2020/12/02 12:15:42
(permalink)
I came in here to see if the latest version is any good for my 2080 Super....
I am leaving without much of an answer.... documentation is a bit scarce.
AMD RYZEN 9 5900X 12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
|
Trelor
iCX Member
- Total Posts : 496
- Reward points : 0
- Joined: 2007/04/06 10:38:50
- Location: Northern, NJ
- Status: offline
- Ribbons : 7
Re: EVGA Precision X1 1.1.1
2020/12/03 08:08:21
(permalink)
RTX 3080 settings are not retaining (LED, OC, Power Target); the fans keep turning off so the GPU idles at a toasty 61ºC when web browsing....
Heatware: Trelor - I primarily use eBay which is attached to my heatware.
|
nrblank2B
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/07/19 18:59:02
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/05 05:51:20
(permalink)
guidomz
+9999 on this! Damm I miss this too!ThaWhistle
Any reason why CPU stats seem to have disappeared?
+9999 on this! Damm I miss this too!
Yeah, I'd really like to monitor my CPU temp and frequency. Is it possible to use RivaTuner with PX1? Or can I use PX1 for just LED and use Afterburner for everything else so that I can use RivaTuner and see all my stats that way?
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 6116
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 1.1.1
2020/12/05 11:38:22
(permalink)
Trelor
RTX 3080 settings are not retaining (LED, OC, Power Target); the fans keep turning off so the GPU idles at a toasty 61ºC when web browsing....
I have noticed that if I change the setting to another LED type (from temp to rainbow wave, let's say) it doesn't stick..... You'd think they'd try some of these basic things ;) At any rate...they don't have a lot off people available to work on it, so ...I forgive them, just hope it's fixed later.
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
GPlatik
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/07/13 18:53:23
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/09 13:21:25
(permalink)
CPU Temp Missing 3060 Ti FTW3.
This breaks my heart man, I shoulda read the forums but I wanted contorl of the rgb... After updating PX1 my HW monitor screen I just installed in my case displaying PX1 stats is missing the CPU temp
|
bernhardberger
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2014/12/09 01:31:24
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/10 17:10:40
(permalink)
OC Scanner keeps throwing BSODs around the 23% mark..
3080 FTW3 Ultra, last 3 nvidia drivers all the same.
|
RedSVTLightning
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2020/09/01 11:10:43
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/11 09:36:12
(permalink)
Mine too.
3090 FTW3 XOC BIOS when power, temp and voltage sliders all the way up.
|
felicityc
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2018/04/20 20:50:08
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/14 02:42:28
(permalink)
So like
I've never used the OC scanner and I never will
can you guys release a software where it's just a list of sliders that change the fan speed and turn off LEDs, + increase power/temp target?
I can just OC through afterburner or by lighting my card on fire, it will do a better job than this has for the past three EVGA cards I've owned. It's crazy we had to use weird workarounds to even get it to not hard crash, and now nothing saves anyway, so what's the point?
you had one job
for everyone apparently using this as a system stats tool, please use hwinfo or something. even hwmonitor. RTSS. all these are better choices.
|
jayrwar
Superclocked Member
- Total Posts : 113
- Reward points : 0
- Joined: 2020/05/27 06:42:57
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/14 19:38:14
(permalink)
|
QingFengX
Superclocked Member
- Total Posts : 108
- Reward points : 0
- Joined: 2020/12/05 10:10:51
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/15 10:15:56
(permalink)
|
trzynadlowski
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/11/20 20:24:50
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/15 10:17:08
(permalink)
It seems people are experiencing the same issue wrt to the temperate LED settings not being retained? When I first installed my 3090 FTW3 Ultra, it *was* working, but then mysteriously stopped. After some back and forth with support, they cross-shipped me a new card and the same thing happened. I'm tempted to keep the second card for a dual-GPU machine learning rig and forfeit my collateral :P
I hope this issue can be addressed soon. I detest RGB LEDs in general but for temperature monitoring, it is actually quite useful.
|
sunshineX 
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2020/12/15 22:39:54
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/15 22:43:16
(permalink)
|
sjpatter86
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/10/05 19:49:22
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2020/12/30 16:05:31
(permalink)
trzynadlowski
It seems people are experiencing the same issue wrt to the temperate LED settings not being retained? When I first installed my 3090 FTW3 Ultra, it *was* working, but then mysteriously stopped. After some back and forth with support, they cross-shipped me a new card and the same thing happened. I'm tempted to keep the second card for a dual-GPU machine learning rig and forfeit my collateral :P
I hope this issue can be addressed soon. I detest RGB LEDs in general but for temperature monitoring, it is actually quite useful.
They're probably going to have to issue a firmware update. Jacob replied to a tweet I sent him saying that the LED settings are saved to the card BIOS. So if they're not retaining, which seems to be the case almost universally, then it must be a BIOS issue.
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.1.1
2021/01/02 17:21:15
(permalink)
I still use a ftw3 2070 super, but its not holding save in profile on reboot, even though, i have options set to load profile last start, and
load with windows. Now if i attatch a hotkey to a profile, that works ok, but i don't wanna keep doing that , so whats going on? and
is their a quick fix to resolve profiles on startup?
|