dmann304
So, i was able to boot at 5Ghz, with a 1.98v and 1.3v core, seemed stable on Aida64 stress, Prime 95, blend,
a few games, and with an avx offset of 1 the Cinabench R15 run with 80c, but in R20 or 23,  lockup, but near
end of tile render, So I might be getting closer to stable , but temps are like: high, in the mid 80's near 90c.
 
So looks like 49 is where its at with a 360 ASIO, and 5 looks to be done , but with open loop water. But weird, in
games, seems to hover in the mid 50's for temps, and Aida, and Prime near 70c.
 
Edit:::::     Ok good news, running 5ghz no crashes, passes all tests including tile renders, and games run good, and even 
prime 95 , and aida runs are stable. Great to see this, but had to push vin to 2.1v, 1.33v core.  and seems to fix it, temps on
a full tile render seem to sit at 80c a brief 90c and hovered at 85c.  And idle at 39c, so whatever i did seem to make it work. 
Thought these chips were blast furnaces at 5 ghz, but mine seems rock solid.
 
Safe to run 2.1v vin?

Does it stay at 5.0GHZ during P95/Aida64/Cinebench runs or does it throttle?

Ok, came back the next day, and with same setting for 5ghz, ran a blender classroom render, and cinabench r23, 
bsod, and even a restart.  For some reason, these things never run the same from day to day, even though
all was well before, seems results were different at 5, so i put it back to 4900, and temps were cooler, and passed
all tests, so will settle for 4.9ghz. Doesn't seem noticble from those 2 speeds.

scratch all that. i was able to get 4000 cl 15 stable on the dark with your typical oc voltages.