sunt88126
Superclocked Member
- Total Posts : 117
- Reward points : 0
- Joined: 2021/04/18 22:21:58
- Status: offline
- Ribbons : 0
Just got a new 3080ti from local store. 1. The fan spin before entering to windows. 2. When get into windows, the fan stop working. 3. No display with EVGA, has display with intel GPU. 4. install Nv driver, said cannot detect GPU and cannot install the driver. 5. Cannot find GPU in asus BIOS setup. and when start BIOS setup, the GPU fan stop working. 6. MB: ASUS Z590 Hero
24G-P5-3979-KR 6/23/2021 6:00:25 AM PT No 12G-P5-3959-KR 6/16/2021 2:46:56 PM PT No 24G-P5-3999-KR 6/15/2021 9:49:45 AM PT No 12G-P5-3967-KR 6/3/2021 8:39:16 AM PT NoAssociate Code: 7AXD4LC8M4FVW4D
|
Kbird666
Superclocked Member
- Total Posts : 150
- Reward points : 0
- Joined: 2009/11/11 14:19:39
- Status: offline
- Ribbons : 2
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/22 23:35:20
(permalink)
MoBo Bios set to Full UEFI, not CSM ? Card in Correct Slot?
GByte Z590 Aorus Elite AX MB + 11700K 32GB Kingston Fury DDR4 @3200mhz EVGA Nvidia RTX 3080Ti EVGA G6 850watt P.S. (3) 32" BenQ BL3200PT Monitors (CAD-WS) .
|
sunt88126
Superclocked Member
- Total Posts : 117
- Reward points : 0
- Joined: 2021/04/18 22:21:58
- Status: offline
- Ribbons : 0
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/22 23:45:56
(permalink)
Kbird666 MoBo Bios set to Full UEFI, not CSM ? Card in Correct Slot?
Slot is correct, I tried both slots(PCIE 4 x16 or x8), same issue. I use UEFI bios and cannot start CSM, it is greyed out.
24G-P5-3979-KR 6/23/2021 6:00:25 AM PT No 12G-P5-3959-KR 6/16/2021 2:46:56 PM PT No 24G-P5-3999-KR 6/15/2021 9:49:45 AM PT No 12G-P5-3967-KR 6/3/2021 8:39:16 AM PT NoAssociate Code: 7AXD4LC8M4FVW4D
|
Kbird666
Superclocked Member
- Total Posts : 150
- Reward points : 0
- Joined: 2009/11/11 14:19:39
- Status: offline
- Ribbons : 2
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 00:04:03
(permalink)
sunt88126
Kbird666 MoBo Bios set to Full UEFI, not CSM ? Card in Correct Slot?
Slot is correct, I tried both slots(PCIE 4 x16 or x8), same issue. I use UEFI bios and cannot start CSM, it is greyed out.
CSM maybe greyed out if Secure Boot or Fastboot is On ? should work on UEFI though Have you tested with another GPU ? in case PCIe Slot is bad Have you disabled the iGPU in the Bios? Call Store you bought at for support..... or have them test card in another computer....
GByte Z590 Aorus Elite AX MB + 11700K 32GB Kingston Fury DDR4 @3200mhz EVGA Nvidia RTX 3080Ti EVGA G6 850watt P.S. (3) 32" BenQ BL3200PT Monitors (CAD-WS) .
|
sunt88126
Superclocked Member
- Total Posts : 117
- Reward points : 0
- Joined: 2021/04/18 22:21:58
- Status: offline
- Ribbons : 0
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 08:16:39
(permalink)
Kbird666
sunt88126
Kbird666 MoBo Bios set to Full UEFI, not CSM ? Card in Correct Slot?
Slot is correct, I tried both slots(PCIE 4 x16 or x8), same issue. I use UEFI bios and cannot start CSM, it is greyed out.
CSM maybe greyed out if Secure Boot or Fastboot is On ? should work on UEFI though Have you tested with another GPU ? in case PCIe Slot is bad Have you disabled the iGPU in the Bios? Call Store you bought at for support..... or have them test card in another computer....
Tried disable iGPU by select PCIE as primary GPU, but the mobo change back to auto in next restart,
24G-P5-3979-KR 6/23/2021 6:00:25 AM PT No 12G-P5-3959-KR 6/16/2021 2:46:56 PM PT No 24G-P5-3999-KR 6/15/2021 9:49:45 AM PT No 12G-P5-3967-KR 6/3/2021 8:39:16 AM PT NoAssociate Code: 7AXD4LC8M4FVW4D
|
aka_STEVE_b
EGC Admin
- Total Posts : 17692
- Reward points : 0
- Joined: 2006/02/26 06:45:46
- Location: OH
- Status: offline
- Ribbons : 69
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 08:30:46
(permalink)
1st -list your entire system specs. 2nd - tell us how you just went into a local store & managed to get a brand new 3080 ti card. ( that seems pretty impossible ) 3rd- did you put in the latest BIOS for your motherboard ? 4 -make sure this is done too . - Disable Compatibility Support Module (CSM) in the SBIOS. Ensure GPT partition type is used (and not MBR) a. You can convert MBR to GPT using these guides
AMD RYZEN 9 5900X 12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
|
sunt88126
Superclocked Member
- Total Posts : 117
- Reward points : 0
- Joined: 2021/04/18 22:21:58
- Status: offline
- Ribbons : 0
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 08:39:52
(permalink)
aka_STEVE_b 1st -list your entire system specs. 2nd - tell us how you just went into a local store & managed to get a brand new 3080 ti card. ( that seems pretty impossible ) 3rd- did you put in the latest BIOS for your motherboard ? 4 -make sure this is done too . - Disable Compatibility Support Module (CSM) in the SBIOS. Ensure GPT partition type is used (and not MBR) a. You can convert MBR to GPT using these guides
1. I9-11900k ASUS ROG Z590 Hero, Corsair vengeance rgb pro 32G*2 and the 3080ti. 2. I win a shuffle in local store 3. Latest BIOS 4. Not try yet
24G-P5-3979-KR 6/23/2021 6:00:25 AM PT No 12G-P5-3959-KR 6/16/2021 2:46:56 PM PT No 24G-P5-3999-KR 6/15/2021 9:49:45 AM PT No 12G-P5-3967-KR 6/3/2021 8:39:16 AM PT NoAssociate Code: 7AXD4LC8M4FVW4D
|
aka_STEVE_b
EGC Admin
- Total Posts : 17692
- Reward points : 0
- Joined: 2006/02/26 06:45:46
- Location: OH
- Status: offline
- Ribbons : 69
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 08:43:32
(permalink)
you didn't list what power supply & if you are using the recommended 3x separate cables to each power plug on the card.
AMD RYZEN 9 5900X 12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
|
sunt88126
Superclocked Member
- Total Posts : 117
- Reward points : 0
- Joined: 2021/04/18 22:21:58
- Status: offline
- Ribbons : 0
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 08:58:51
(permalink)
aka_STEVE_b you didn't list what power supply & if you are using the recommended 3x separate cables to each power plug on the card.
Seasonic PRIME PX-1000, I use 2 cables(only 2 plugins in GPU) 6+2 pin head in GPU side, 8pin but 2 are empty in PSU side.
24G-P5-3979-KR 6/23/2021 6:00:25 AM PT No 12G-P5-3959-KR 6/16/2021 2:46:56 PM PT No 24G-P5-3999-KR 6/15/2021 9:49:45 AM PT No 12G-P5-3967-KR 6/3/2021 8:39:16 AM PT NoAssociate Code: 7AXD4LC8M4FVW4D
|
aka_STEVE_b
EGC Admin
- Total Posts : 17692
- Reward points : 0
- Joined: 2006/02/26 06:45:46
- Location: OH
- Status: offline
- Ribbons : 69
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 10:24:24
(permalink)
Seems everything should be good enough - maybe try it in another system to make absolute sure it's a dud ,.. but looks like you may have to do an RMA .
AMD RYZEN 9 5900X 12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64
|
Limga
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2021/06/01 00:21:07
- Status: offline
- Ribbons : 0
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 10:26:44
(permalink)
Try clearing CMOS on your motherboard. That did thing for me.
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: EVGA 3080 ti XC3 Ultra Cannot start
2021/06/23 10:39:25
(permalink)
I have a feeling it's your motherboard and not the card. Try changing the PCI-E to Gen 3. Your problem sounds similar to people that had vertical mounts on their GPU, but the riser cable was a Gen 3 one. But that's not remotely close to your configuration. But the symptoms sound like the motherboard. Change the PCI-E to GEN 3 and let us know.
|