K5_IDAHO
     Anyone got this case?  Even though Im more than a few months out for this build "Waiting for Intel X299" Ive been looking for a case for watercooling, and start piecing and building a complete plumbing for the water build, and have built before i build the X299 build.
 
     Feedback on water parts and case? Will be my first water build as well....     
 
List:
Front 280mm Rad
Top 360mm Rad
3 Quick Disconecnts
EK-XRES 140 Revo D5
Premix coolent
Soft Tubing
Fittings
 
CASE
link:
http://www.phanteks.com/Enthoo-Pro-M-TemperedGlass.html
 
link:
https://www.newegg.com/Product/Product.aspx?item=N82E16811854042
 
Knight'

Waiting for more pics when you finish   

knightsilver
K5_IDAHO
     Anyone got this case?  
 
CASE
link:
http://www.phanteks.com/Enthoo-Pro-M-TemperedGlass.html
 
link:
https://www.newegg.com/Product/Product.aspx?item=N82E16811854042
 
Knight'

I really like the Pro M Tempered Glass from Phanteks! In fact, I think I like it even more than their Evolv ATX--I know, blasphemy! :-)
Actually, the reason I like it better is threefold:

1. Better airflow/support.
2. Provision for an optical drive (which I still use).
3. The Pro M TG doesn't have tempered glass on the right side panel like the Evolv ATX does.

 
Innards-wise, there is very little (if any) difference between those 2 cases.
 
As an aside (speaking of the Evolv ATX), I just read that Phanteks may be adding hinges to the tempered glass side panels on the Evolv ATX. Just a rumor at this point, but it would be cool if they do it.
 
 
Re: X299
I have been putting together an X99 system, but will all of the negative comments I've read, I may follow your lead and wait for X299.
 
Good luck with your build!

I just read that new Pro M cases come with new 140MP fans (as opposed to the previously included 140SP's).
I have no experience with either model, but some seem to like the noise profile of the new fans a bit better than the previous version.
 
BTW - At the time of this writing, the Pro M comes with two 140mm fans in the front and one 140mm fan in the rear.

I like a sleek Plane jane Case, with positive air flow and plenty of Rad options....
 
Prob order the case sometime soon, see if i can fit,
 
Top 420x45
Front 240x60 or 420x45
Rear 140x45
 

nice

I currently have Phanteks 1st ever case the Enthoo Primo which is waaayyy larger than i thought it would be, so I'm looking to downsize to something more portable that can fit on a desk and not so tall i have to place it on ground and not as massive, is the Pro M Tempered a good downsize choice???

rjohnson11

123Testing123
I just read that new Pro M cases come with new 140MP fans (as opposed to the previously included 140SP's).
I have no experience with either model, but some seem to like the noise profile of the new fans a bit better than the previous version.
 
BTW - At the time of this writing, the Pro M comes with two 140mm fans in the front and one 140mm fan in the rear.

This is one thing I hope all PC case manufacturers will do in the future is to put improved fans into their PC cases.

I can relate, manufacturers need to take a hint from Phanteks for including good fans AND cable management simplicity in their cases

Gam3r26

123Testing123

knightsilver
K5_IDAHO
     Anyone got this case?  
 
CASE
link:
http://www.phanteks.com/Enthoo-Pro-M-TemperedGlass.html
 
link:
https://www.newegg.com/Product/Product.aspx?item=N82E16811854042
 
Knight'

I really like the Pro M Tempered Glass from Phanteks! In fact, I think I like it even more than their Evolv ATX--I know, blasphemy! :-)
Actually, the reason I like it better is threefold:

1. Better airflow/support.
2. Provision for an optical drive (which I still use).
3. The Pro M TG doesn't have tempered glass on the right side panel like the Evolv ATX does.

 
Innards-wise, there is very little (if any) difference between those 2 cases.
 
As an aside (speaking of the Evolv ATX), I just read that Phanteks may be adding hinges to the tempered glass side panels on the Evolv ATX. Just a rumor at this point, but it would be cool if they do it.
 
 
Re: X299
I have been putting together an X99 system, but will all of the negative comments I've read, I may follow your lead and wait for X299.
 
Good luck with your build!

I agree, more room, better aesthetics better cable management as well not to mention cheaper!

If you mean better than the Evolv, I think only the last item in your list above is accurate (cheaper).
 
Here are the specs as far as size and room is concerned:
 
 Pro M: 9.25 in x 18.9 in x 19.7 in (W x H x D)
 Evolv: 9.25 in x 19.5 in x 20.1 in (W x H x D)
 
Not much difference there.
 
 
Aesthetically, I think the majority of people would say the Evolv is way ahead of the Pro M as far as looks are concerned.
 
 
Cable manage is for all intents and purposes the same in both cases:
 
 
 
 
My original points were directed to:

1. Airflow (the Pro M is definitely better than the Evolv ATX)
2. Optical drive cage (the Pro M has one, the Evolv ATX does not)
3. Right side tempered glass (The Pro M's right side panel is metal, the Evolv ATX's is tempered glass)

 
#1 is definitely objective and measureable.
#2 & #3 are subjective with my preferences leaning toward the Pro M's offerings.
 
I hope that clears things up a bit.

It looks pretty good! I really like phanteks cases though. I just ordered an Evolv ATX tempered the other day. The right side not being tempered would definitely be better to think. That's alright I've just got some extra cable management time in my near future.

i like this