Filip1995
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/10/17 12:57:58
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/03 01:12:23
(permalink)
Did this many times. Tried different pci e lines, diferrent cables, not using the splitter ones. chcecked the connections on both ends
|
Udo_G
Superclocked Member
- Total Posts : 200
- Reward points : 0
- Joined: 2015/11/17 22:56:19
- Status: offline
- Ribbons : 3
Re: EKWB blocks for FTW3
2021/03/03 01:14:58
(permalink)
Sounds like that you have to start a RMA
|
Filip1995
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/10/17 12:57:58
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/03 01:19:06
(permalink)
I did, but still tying to trubleshoot until response. I am really puzzled by this 62 code. I didnt find many solved cases that would say what specifically it is.
|
fresnored
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2014/10/21 17:46:57
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/03 19:25:41
(permalink)
Still a WIP. But this is a 3090 FTW3 Ultra On an EK waterblock.
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/04 22:20:54
(permalink)
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
Nereus
Captain Goodvibes
- Total Posts : 18882
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: EKWB blocks for FTW3
2021/03/08 20:59:09
(permalink)
How are you controlling the RGB on the EK water block? I have it plugged into the RGB header on the motherboard and it's doing the rainbow thing (default I presume), but scratching my head how to change it. The Z490 Dark manual says it should work with EVGA Eleet X1 software, but when I go to the Eleet download page there is no version for the Z490 Dark apparently. Will the Z390 version work? I believe it works with ASUS Aura but I have now switched to an EVGA Z490 Dark motherboard.. was hoping maybe EVGA Precision would pick it up, but nope. I have Corsair iCue with the Lighting Node Pro, and that controls the Corsair RGB memory, the Corsair RGB fans, and the RGB reservoir, but there's no port for the EK RGB plug. I went to EKWB and found their EK Connect software, but you need one of their hardware hubs for it to work apparently. Am I stuck with a rainbow GPU block forever?
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/08 21:32:58
(permalink)
Nereus How are you controlling the RGB on the EK water block? I have it plugged into the RGB header on the motherboard and it's doing the rainbow thing (default I presume), but scratching my head how to change it. The Z490 Dark manual says it should work with EVGA Eleet X1 software, but when I go to the Eleet download page there is no version for the Z490 Dark apparently. Will the Z390 version work? I believe it works with ASUS Aura but I have now switched to an EVGA Z490 Dark motherboard.. was hoping maybe EVGA Precision would pick it up, but nope. I have Corsair iCue with the Lighting Node Pro, and that controls the Corsair RGB memory, the Corsair RGB fans, and the RGB reservoir, but there's no port for the EK RGB plug. I went to EKWB and found their EK Connect software, but you need one of their hardware hubs for it to work apparently. Am I stuck with a rainbow GPU block forever?
I control the EK RGB (actually all the RGB) via a corsair commander pro with modified cables.
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
Filip1995
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/10/17 12:57:58
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/08 21:50:16
(permalink)
Nereus How are you controlling the RGB on the EK water block? I have it plugged into the RGB header on the motherboard and it's doing the rainbow thing (default I presume), but scratching my head how to change it. The Z490 Dark manual says it should work with EVGA Eleet X1 software, but when I go to the Eleet download page there is no version for the Z490 Dark apparently. Will the Z390 version work? I believe it works with ASUS Aura but I have now switched to an EVGA Z490 Dark motherboard.. was hoping maybe EVGA Precision would pick it up, but nope. I have Corsair iCue with the Lighting Node Pro, and that controls the Corsair RGB memory, the Corsair RGB fans, and the RGB reservoir, but there's no port for the EK RGB plug. I went to EKWB and found their EK Connect software, but you need one of their hardware hubs for it to work apparently. Am I stuck with a rainbow GPU block forever?
This is what you need: https://www.ebay.com/itm/...-Adapter-/372521827376I use it for my block and distroplate and its perfect.
|
Nereus
Captain Goodvibes
- Total Posts : 18882
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: EKWB blocks for FTW3
2021/03/09 04:19:34
(permalink)
phroze I control the EK RGB (actually all the RGB) via a corsair commander pro with modified cables.
Filip1995 This is what you need: https://www.ebay.com/itm/...-Adapter-/372521827376 I use it for my block and distroplate and its perfect.
Awesome, thanks! The Lighting Node Pro only has 2 LED headers, both being used (one by fans, one by reservoir), so you just daisy chain it to one of those, probably the res, and it's good to go?
|
Filip1995
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/10/17 12:57:58
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/09 04:27:42
(permalink)
Nereus
phroze I control the EK RGB (actually all the RGB) via a corsair commander pro with modified cables.
Filip1995 This is what you need: https://www.ebay.com/itm/...-Adapter-/372521827376 I use it for my block and distroplate and its perfect.
Awesome, thanks! The Lighting Node Pro only has 2 LED headers, both being used (one by fans, one by reservoir), so you just daisy chain it to one of those, probably the res, and it's good to go?
I am not sure if you retain full functionality of the reservoir. I dealt with similar situation on my commander pro. I have corsair waterblock xc7 which populates one port so CP can identify it separately. The other port is populated by daisy chained EK distroplate and waterblock, however they cant be controlled separately and are identified both as a single light strip. So I am not sure if same thing wouldnt happen with your reservoir
|
Nereus
Captain Goodvibes
- Total Posts : 18882
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: EKWB blocks for FTW3
2021/03/09 04:52:47
(permalink)
Filip1995
Nereus
phroze I control the EK RGB (actually all the RGB) via a corsair commander pro with modified cables.
Filip1995 This is what you need: https://www.ebay.com/itm/...-Adapter-/372521827376 I use it for my block and distroplate and its perfect.
Awesome, thanks! The Lighting Node Pro only has 2 LED headers, both being used (one by fans, one by reservoir), so you just daisy chain it to one of those, probably the res, and it's good to go?
I am not sure if you retain full functionality of the reservoir.
I dealt with similar situation on my commander pro. I have corsair waterblock xc7 which populates one port so CP can identify it separately. The other port is populated by daisy chained EK distroplate and waterblock, however they cant be controlled separately and are identified both as a single light strip.
So I am not sure if same thing wouldnt happen with your reservoir
Ok thanks, that's not a problem as long as the fans are separate. Strange that Corsair have all these different RGB components, but both the Commander Pro and Lighting Node Pro only have 2 LED headers... although maybe I can run it off one of the RGB fan LED hub headers instead as only 3 of the 6 are in use in my case. ¯\_(ツ)_/¯
|
Filip1995
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/10/17 12:57:58
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/09 05:24:31
(permalink)
yeah corsair proprietary cables are a mess. They have separate header that only fits commander pro or the node and then they have another header for rgb fans only and another rgb hub for fans only.
I only have 6 QL rgb fans, distroplate, cpu and gpu waterblocks and the thing is a damn spaghetti monster
|
Nereus
Captain Goodvibes
- Total Posts : 18882
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: EKWB blocks for FTW3
2021/03/09 05:34:33
(permalink)
Filip1995 yeah corsair proprietary cables are a mess. They have separate header that only fits commander pro or the node and then they have another header for rgb fans only and another rgb hub for fans only.
I only have 6 QL rgb fans, distroplate, cpu and gpu waterblocks and the thing is a damn spaghetti monster
^ I can relate. Thanks again.
|
Nereus
Captain Goodvibes
- Total Posts : 18882
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: EKWB blocks for FTW3
2021/03/09 11:11:30
(permalink)
Update - I was about to order that adapter, and then found out from EVGATech_ChristianJ (thanks!) that the reason I had not been able to run the LED through the motherboard header was because I was trying to use EVGA's EleetX software instead of EleetX1 software! LOL, who knew? I am now able to control the EK block LEDs from the EleetX1 app! Yay! Thank you for your help though!
|
JDamageinc
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2020/11/25 14:44:32
- Location: NJ
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/09 19:26:59
(permalink)
|
fps_noob
New Member
- Total Posts : 82
- Reward points : 0
- Joined: 2015/02/07 07:28:29
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/10 01:23:59
(permalink)
JDamageinc If anyone is interested in EKWB Quantum vector FTW3 RTX 3080/3090 WATERBLOCKS {Spartan Liquid Cooling - PC Liquid Cooling}
They're on backorder though... Personally I'm just waiting for my spot in line directly from EK.
|
Rngmonster
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2020/12/17 05:01:49
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/03/10 02:06:40
(permalink)
For my EU / German brothers & sisters, Alternate.de has the Nickel + Acetal version of the ftw3 block in stock.
|
JDamageinc
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2020/11/25 14:44:32
- Location: NJ
- Status: offline
- Ribbons : 0
EK-Quantum Vector ftw3 3080/3090.
2021/03/27 20:15:13
(permalink)
EK water block on 3090 ftw3 ultra, Installed in Corsair Obsidian 1000D, build completed 3/14/21
post edited by JDamageinc - 2021/06/01 19:38:47
Attached Image(s)
|
maytheus
Superclocked Member
- Total Posts : 109
- Reward points : 0
- Joined: 2020/10/14 09:55:23
- Status: offline
- Ribbons : 0
Re: MODS DELETE POST
2021/03/29 20:12:15
(permalink)
I have the following new in the box that I have decided not to use. Will let it go for $150 plus shipping in the US. PM me if interested. EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB - Nickel + Plexi38311098329811EK-Quantum Vector FTW3 RTX 3080/3090 Backplate - Black3831109833001 1
ONLINECPU: Intel i9 10900kMB: ASUS ROG Maximus Hero XII ~ PSU: eVGA 1000W T2 TitaniumRAM: 4x8GB G.Skill TridentZ Neo F4-3600C16D-16GTZN CL16-16-16-36Video Card: eVGA RTX 3090 FTW3 UltraCase: Lian Li O11 Dynamic XL w/ Lian Li Unifan Case FansSSDs/HDDs: Sabrent Rocket 500gb PCI 4 NVMe SSD, Sabrent Rocket 2TB PCI 4 NVMe SSDDisplay: LG 34GP83A-B 34" Ultrawide Curved QHD 1440p Monitor @ 144hzMouse: Logitech G900 ~ Mouse Mat: Gamers Nexus Mouse MatKeyboard: Logitech G910 ~ Sound: Schitt Hel External DAC w/ Sennhesier HD6XX Headset and ModmicWatercooling: EK-Quantum Momentum Monoblock; EK GPU Block; Heatkiller Tube Res; EK Rads (PE360 and XE360)
|
Swemmel
Superclocked Member
- Total Posts : 107
- Reward points : 0
- Joined: 2021/04/28 00:25:14
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/04/28 08:08:29
(permalink)
|
bBoss_95
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2017/09/22 17:30:36
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/04/29 13:59:58
(permalink)
fresnored Still a WIP. But this is a 3090 FTW3 Ultra On an EK waterblock.
Does the ftw3 with the ek block fit inside the case with the glass panel close? I've read several post about this problem and a lot of people said that the max block length for the o11 xl is 153.3mm (the block for the 3090 in this case is 154.5mm)
|
jaypr9
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2016/05/08 10:11:50
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/05/01 15:00:22
(permalink)
bBoss_95
fresnored Still a WIP. But this is a 3090 FTW3 Ultra On an EK waterblock.
Does the ftw3 with the ek block fit inside the case with the glass panel close? I've read several post about this problem and a lot of people said that the max block length for the o11 xl is 153.3mm (the block for the 3090 in this case is 154.5mm)
I've looked into this because I'm planning on a getting a ek waterblock for my ftw3. It will not fit the regular 011 unless you mount it vertically. It does fit the 011 XL horizontally.
post edited by jaypr9 - 2021/05/01 18:22:36
|
rjbarker
CLASSIFIED Member
- Total Posts : 3214
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: EKWB blocks for FTW3
2021/05/01 16:44:39
(permalink)
Nereus How are you controlling the RGB on the EK water block? I have it plugged into the RGB header on the motherboard and it's doing the rainbow thing (default I presume), but scratching my head how to change it. The Z490 Dark manual says it should work with EVGA Eleet X1 software, but when I go to the Eleet download page there is no version for the Z490 Dark apparently. Will the Z390 version work? I believe it works with ASUS Aura but I have now switched to an EVGA Z490 Dark motherboard.. was hoping maybe EVGA Precision would pick it up, but nope. I have Corsair iCue with the Lighting Node Pro, and that controls the Corsair RGB memory, the Corsair RGB fans, and the RGB reservoir, but there's no port for the EK RGB plug. I went to EKWB and found their EK Connect software, but you need one of their hardware hubs for it to work apparently. Am I stuck with a rainbow GPU block forever?
I was stuck like you....then figured out how to add both my EK CPU Block and EK GPU Block RGB's to Asus Aura and it works!!!! Can change them to whatever you want in Aura. I have the RGB cables plugged directly into headers on Mobo. Been building Custom loop rigs for years and never had such a feeling of satisfaction after I figured this out !!!!!!
post edited by rjbarker - 2021/05/01 16:46:23
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
bBoss_95
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2017/09/22 17:30:36
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/05/01 18:19:44
(permalink)
jaypr9
bBoss_95
fresnored Still a WIP. But this is a 3090 FTW3 Ultra On an EK waterblock.
Does the ftw3 with the ek block fit inside the case with the glass panel close? I've read several post about this problem and a lot of people said that the max block length for the o11 xl is 153.3mm (the block for the 3090 in this case is 154.5mm)
I've looked into this because I'm planning on a getting a ek water lock for my ftw3. It will not fit the regular 011 unless you mount it vertically. It does fit the 011 XL horizontally.
Thank you for the info :)
|
rjbarker
CLASSIFIED Member
- Total Posts : 3214
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: EKWB blocks for FTW3
2021/05/01 20:06:40
(permalink)
Nereus Update - I was about to order that adapter, and then found out from EVGATech_ChristianJ (thanks!) that the reason I had not been able to run the LED through the motherboard header was because I was trying to use EVGA's EleetX software instead of EleetX1 software! LOL, who knew? I am now able to control the EK block LEDs from the EleetX1 app! Yay! Thank you for your help though!
Glad you git it sorted out....drove me nuts too!!!
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
AMerexican
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2021/04/29 02:22:24
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/05/02 16:12:11
(permalink)
|
rjbarker
CLASSIFIED Member
- Total Posts : 3214
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: EKWB blocks for FTW3
2021/05/02 16:42:11
(permalink)
AMerexican Definitely good to know
More spam....!!!!
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
AMerexican
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2021/04/29 02:22:24
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/05/03 02:24:45
(permalink)
phroze
fresnored Still a WIP...
Lookin good but I might be biased.
Which Distro plate is that? Build looks great.
post edited by AMerexican - 2021/05/03 02:26:47
|
knightostjohn
Superclocked Member
- Total Posts : 102
- Reward points : 0
- Joined: 2019/07/17 10:19:48
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/05/24 06:09:57
(permalink)
I plan on using an EK-QuantumX Delta TEC CPU block on one of EVGA's hybrid GPU's. Does anyone know if a CPU block like this will fit their hybrid cards and whether there are different mounting hole sizes between the 10 series, 20 series, and 30 series hybrid cards? This is the block that I plan on using: I plan on using either a FTW3 Ultra Hybrid if I can get one, but I don't want to go through that trouble if this won't fit.
|
knightostjohn
Superclocked Member
- Total Posts : 102
- Reward points : 0
- Joined: 2019/07/17 10:19:48
- Status: offline
- Ribbons : 0
Re: EKWB blocks for FTW3
2021/05/24 06:20:24
(permalink)
I went ahead and created a dedicated thread here in case this was too far off the OP:
|