EVGA

DG-77 can't figure vertical mount

Author
Post
Essentials Only Full Version
pharithos17
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2010/01/01 18:57:43
  • Status: offline
  • Ribbons : 0
2018/01/18 09:53:36 (permalink)
How do I mount? I put on the vertical backplate and have the ribbon, but the only way I canget it to mount, the graphics out ports don't fit flush with the rear of the case - they don't extend far enough and leave a hole in the back. Tutorials for the challenged?
#1

3 Replies Related Threads
    PietroBR
    FTW Member
    • Total Posts : 1202
    • Reward points : 0
    • Joined: 2013/09/14 06:40:52
    • Location: Brazil
    • Status: offline
    • Ribbons : 7
    Re: DG-77 can't figure vertical mount 2018/01/19 02:51:56 (permalink)
    From the review from HardwareCanuks


    For what I saw, you need to first insert tow standoffs on the two holes, and then fix the extender in where is supposed to be.

    Case: Asus Z370-G Box / MB: Asus Z370-G / CPU: Intel I7 8700K / Mem.: 16GB (2x8) 3000Mhz Corsair Dominator Platinum DDR4 / GPU: GTX 1080TI FTW3 / A.I.O. W.C: EVGA CLC280 / PSU: EVGA SuperNOVA G3 750W

     
     
    #2
    pharithos17
    New Member
    • Total Posts : 8
    • Reward points : 0
    • Joined: 2010/01/01 18:57:43
    • Status: offline
    • Ribbons : 0
    Re: DG-77 can't figure vertical mount 2018/01/19 07:51:37 (permalink)
    Appreciate. I missed the two standoffs, which helps. But, even in the vid, at 9:24, it looks like he has the same gap - I was thinking it would fit flush with the rear, like any other PCI card or I/O shield. It just doesn't look right.
    #3
    PietroBR
    FTW Member
    • Total Posts : 1202
    • Reward points : 0
    • Joined: 2013/09/14 06:40:52
    • Location: Brazil
    • Status: offline
    • Ribbons : 7
    Re: DG-77 can't figure vertical mount 2018/01/20 02:25:23 (permalink)
    Ah
    I see what you say now.
    I think, because of the holes position and the included bracket, it's going to have that gap between the back and the card.
    Maybe drilling new holes would make it fit closer?

    Case: Asus Z370-G Box / MB: Asus Z370-G / CPU: Intel I7 8700K / Mem.: 16GB (2x8) 3000Mhz Corsair Dominator Platinum DDR4 / GPU: GTX 1080TI FTW3 / A.I.O. W.C: EVGA CLC280 / PSU: EVGA SuperNOVA G3 750W

     
     
    #4
    Jump to:
  • Back to Mobile