EVGA

Hot!DDCM Desk Project: Unique. Simple. Powerful

Page: < 123 Showing page 3 of 3
Author
LilSkillet
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2018/01/20 17:03:34
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/01/21 19:25:57 (permalink)
really cool build so far i like all the pics and i cant wait to see the finished product. nice job!
 
#61
Noxnoctis1976
Superclocked Member
  • Total Posts : 102
  • Reward points : 0
  • Joined: 2018/01/25 11:22:56
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/01/29 09:12:31 (permalink)
Nice job. Love the step by step photos. Will check back
#62
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/04 16:56:51 (permalink)
LilSkillet
really cool build so far i like all the pics and i cant wait to see the finished product. nice job!


Noxnoctis1976
Nice job. Love the step by step photos. Will check back



Thank you  
We finally got moved in and established.  I have been using this time before my new job starts to work on the desk.  Keep an eye out for updates incoming!

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#63
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/04 17:13:56 (permalink)

https://pcpartpicker.com/list/jBy4r7
 
Good morning DDCM fans and followers!
 
How about another DDCM desk PC update?  
 
I have a couple updates to post, but we’ll start with the first one to say “We are now moved into the new house!!”  One of my first tasks was to reorganize the garage into a workable area for me.  Below is my new dungeon.

 
Then I turned my broken laptop into a HTPC in our bedroom so we can relax before bed with a show.  Look at that cable management.  Second picture is the wires behind the small 21” screen.  The only way it’d be better is if I ran power to behind the screen instead of having the surge protector run up the wall.  After which I built my wife a murphy desk below so she had a place to work and didn’t clutter up my desk project.




 
It took a week but Spectrum finally came out and hooked up our internet.  Before they showed up I went ahead and mounted the wifi router in the hallway for the best whole house signal.  Last picture is my communication wall with the modem, power strip, and gigabit switch.



 
Finally I could get down to work and got the wood filler and started filling in the nail holes, gouges, and small cracks in the wood in preparation for sanding later.

 
Next I drilled and tapped the new motherboard tray.

 
Took my R9 290 and tested my fit with my server ATX board next to the Alphacool reservoirs.  In my next post we start pulling out our water cooling gear and more :D


 
Until next time, Happy Modding!
 

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#64
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/05 23:46:45 (permalink)

https://pcpartpicker.com/list/jBy4r7
 
Good morning DDCM fans and followers!
 
How about another DDCM desk PC update?  
 
Let’s start this update with some great shots of our Alphacool gear.  Sexy watercooling in place so I can start bending tubing soon.



 
We then went onto install our Seagate Barracuda drive in the HDD rack below the radiator shelf.  I can only hope the SATA cable will reach haha

 
Speaking of cables, I first made a cable passthrough plate for the power cables to pass through.  Sexy 3 grommets from ModMyMods.com.


 
I continued on the trek of cables to work on learning crimping and made my first CPU power cable.




 
Until next time, Happy Modding!

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#65
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/08 12:17:17 (permalink)

https://pcpartpicker.com/list/jBy4r7
 
Good morning DDCM fans and followers!
 
How about another DDCM desk PC update?  
Let’s get this update started with one of my favorite photos so far.  The Alphacool Flow Meter Square Plexi edition. That polished plexi just makes my heart flutter.  Should be interesting to see it in action with the red fluid lol.
 




Next was a super daunting task of painting our ASUS Sabertooth 990FX motherboard to get rid off all the green and tan and make it red.  Steps: take it out of Night Shark, tape up everything and slip non sticky tape in all the slots and cover any exposed pins, then paint the crap out of it from every angle but straight above, remove tape and pray it turns on…..
 







Once it was painted and all sexy red and black, we installed our customized Alphacool XPX cpu waterblock.  We painted the brackets red, swapped out the alphacool logo with the red replacement cover. Looks like it was created specifically for my motherboard…… oh… I guess it was haha
 




After the motherboard was sorted out, we turned our attention to our AMD Radeon R9 290.  After stripping it bare of the turbo jet cooler, we installed our Alphacool block and backplate.  To mount it to the backplate, we drilled and tapped 6/32 into the backplate and put motherboard standoffs on.  Then screwed the motherboard screws in from the back, securely holding our mounting plate in place.
 







If you enjoyed this update, just wait for the next one! It will include pictures of our first time bending acrylic tubing!!!  It was a learning experience for sure.
Until next time, Happy Modding!

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#66
rjohnson11
EVGA Forum Moderator
  • Total Posts : 65674
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 62
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/08 12:21:30 (permalink)
This man has some very serious skills. I can't even draw a straight line.

Specs: AMD 1920X Threadripper, Samsung SM961 M.2, 64GB Corsair DDR4 memory (half kit of CMD128GX4M8B2800C14),  ASRock X399 Taichi Motherboard



#67
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/08 12:54:37 (permalink)
rjohnson11
This man has some very serious skills. I can't even draw a straight line.


Haha, the flattery is real.  The kind words are definitely appreciated!   Next update will have our acrylic tube bending..... so more straight'ish lines soon. 

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#68
rjohnson11
EVGA Forum Moderator
  • Total Posts : 65674
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 62
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/10 00:17:55 (permalink)
DDCustomMods
rjohnson11
This man has some very serious skills. I can't even draw a straight line.


Haha, the flattery is real.  The kind words are definitely appreciated!   Next update will have our acrylic tube bending..... so more straight'ish lines soon. 


Looking forward to the tubing pics.

Specs: AMD 1920X Threadripper, Samsung SM961 M.2, 64GB Corsair DDR4 memory (half kit of CMD128GX4M8B2800C14),  ASRock X399 Taichi Motherboard



#69
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/10 00:56:24 (permalink)
rjohnson11
DDCustomMods
 
Haha, the flattery is real.  The kind words are definitely appreciated!   Next update will have our acrylic tube bending..... so more straight'ish lines soon. 

Looking forward to the tubing pics.



Going to see if I can crank out the tubing update before I crash for the evening :p

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#70
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/10 01:08:16 (permalink)

https://pcpartpicker.com/list/jBy4r7
 
Good morning DDCM fans and followers!
 
How about another DDCM desk PC update?  
 
So before the watercooling, acrylic bending, madness ensues….. Here’s a quick picture of our SSD mount.
 




Now that’s over with…. Here’s our Alphacool acrylic tubing runs!  I did also record a video on how I cut and bent the acrylic….. But don’t have a computer that has the power to edit/render the video.  So bear with me :)
 









Until next time, Happy Modding!
 

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#71
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/15 19:33:18 (permalink)

https://pcpartpicker.com/list/jBy4r7
Good morning DDCM fans and followers!
How about another DDCM desk PC update?
We left off last time with a completed watercooling loop…. but still had to paint. So we start off by stripping it down to the bare wood.


While I waited for some wood filler to dry, I went ahead and painted our Alphacool NexXxos radiators, PSU mount bracket, GSkill RAM heatspreaders, and the fan grills for our rear intake fans.




Once the filler was dry, I wasted no time sanding it down. Then just testing a theory I checked the fit of the InWin RGB LED strips and how I was going to run the cable. After the cable test, I brought the desk inside to be wiped down with a damp cloth.




Once it was clean and dry we started painting it black by cutting in the corners and angles first. Then we broke out the 3” brush and filled in all the big areas.




If you’re still reading this far, the next update will be the components installed and the loop set back up and hopefully filled! Leak testing here I come!
Until next time, Happy Modding!

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#72
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/18 10:59:05 (permalink)

https://pcpartpicker.com/list/jBy4r7
 
Good morning DDCM fans and followers!
 
How about another DDCM desk PC update?  
 
We can start off with a glamour shot of the leak testing we did.
 

 
One of the first things we did while waiting for all the paint to dry was to finish making our custom sleeved extensions.
 






Once the paint dried we immediately set to installing our components and figuring out our cable paths.
 





Then we prepped and installed our painted NexXxos 360 radiators which followed with fans, tubes and everything else.  Once it was all connected we started our leak testing.
 





Until next time, Happy Modding!

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#73
rjohnson11
EVGA Forum Moderator
  • Total Posts : 65674
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 62
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/18 11:42:49 (permalink)
Loving the color and the woodwork.

Specs: AMD 1920X Threadripper, Samsung SM961 M.2, 64GB Corsair DDR4 memory (half kit of CMD128GX4M8B2800C14),  ASRock X399 Taichi Motherboard



#74
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/18 17:47:01 (permalink)
rjohnson11
Loving the color and the woodwork.


Thanks!  I'll tell you a secret..... I'm using the desk now.  Keep an eye out for the next update.... probably tomorrow

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#75
Sleinous
EVGA Forum Moderator
  • Total Posts : 7670
  • Reward points : 0
  • Joined: 2010/06/12 12:22:01
  • Location: Paris, France
  • Status: offline
  • Ribbons : 32
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/19 14:49:33 (permalink)
sweet rig! love it!

My Affiliate Code: GL1IAAFWJF
#76
rjohnson11
EVGA Forum Moderator
  • Total Posts : 65674
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 62
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/20 05:32:52 (permalink)
DDCustomMods
rjohnson11
Loving the color and the woodwork.


Thanks!  I'll tell you a secret..... I'm using the desk now.  Keep an eye out for the next update.... probably tomorrow


Looking forward to it

Specs: AMD 1920X Threadripper, Samsung SM961 M.2, 64GB Corsair DDR4 memory (half kit of CMD128GX4M8B2800C14),  ASRock X399 Taichi Motherboard



#77
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/20 18:41:59 (permalink)
Sleinous
sweet rig! love it!




Thank you :)

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#78
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/20 18:44:05 (permalink)

https://pcpartpicker.com/list/jBy4r7
Good morning DDCM fans and followers!
How about another DDCM desk PC update?
First we will start with the winner of my contest. I wanted people on social media to design a dragon and flames to paint on the top of the desk before I seal it up. Here’s the winner. I loved the shape of the dragon head. The flames will need a little cleaning.

Ok, back to the desk. We took this picture while it was night time and during the leak test.

The next morning we went to paint the top of the desk…. And ended up spending a few hours cleaning the carpet instead DOH!


Several hours later I recruited my daughters help and we drained the desk of all the distilled water and filled it with the Mayhems Red Aurora liquid.


After the paint dried on the desk top, I attached it in place and took this teaser picture for social media.

After all the cable management was done and I verified it was working great, I took this semi finished picture. All that’s left is to install the windows and to get the vinyl lettering in place. And YES, I know it’s a small old monitor for this massive project. haha.


I hope everyone has enjoyed this so far and I will update with final pictures on a real camera once I get to the last couple things done. And hopefully by then I’ll have a better monitor too.
Until next time, Happy Modding!

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#79
MasterMiner
New Member
  • Total Posts : 58
  • Reward points : 0
  • Joined: 2018/01/25 21:39:33
  • Status: offline
  • Ribbons : 1
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/23 15:39:59 (permalink)
WOW!
 
That is what I call dedication!
 
Very nice

I used to mine. Now I compute.
#80
rjohnson11
EVGA Forum Moderator
  • Total Posts : 65674
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 62
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/24 08:33:24 (permalink)
Looking forward to those final pics.

Specs: AMD 1920X Threadripper, Samsung SM961 M.2, 64GB Corsair DDR4 memory (half kit of CMD128GX4M8B2800C14),  ASRock X399 Taichi Motherboard



#81
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/03/25 10:48:17 (permalink)
MasterMiner
WOW!
 
That is what I call dedication!
 
Very nice


 
Thanks!  It was definitely worth the time and effort :D

rjohnson11
Looking forward to those final pics.



Hopefully it'll be soon.  Having some GPU issues.... trying to figure out at what point it is happening... Just randomly goes black screen and I had it once have a multi colored fuzzy screen.  Tried different slots on the motherboard with no change, so will keep everyone updated when I figure it out :D

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#82
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/06/13 13:27:47 (permalink)

https://pcpartpicker.com/list/jBy4r7
 
Good morning DDCM fans and followers!
 
How about another DDCM desk PC update?
 
So we needed a shot of the desk to put on our new business cards, so….. I figured I wanted to share with you. We are also in talks to do a hardware upgrade if the vendor approves it.
 



 
 
Of course, none of this would’ve been possible without the amazing sponsors!

 

The business cards came out pretty snazzy too!

 

Until next time, Happy Modding!

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#83
Knightviper
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2009/08/30 07:55:55
  • Location: Kirkcaldy Fife Scotland
  • Status: offline
  • Ribbons : 1
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/06/13 21:54:02 (permalink)
that is some build mate so clean

EVGA Z270 Classified K, Intel core i7 7700k , EVGA CLC 280 AIO, 16GB G.Skill Trident Z RGB @3200MHz, 250GB Samsung Evo SSD, Samsung Evo 840 250 SSD, 1TB WD Caviar Green 
Evga 680 Classified 
EVGA 1300w G2
Windows 10 64-bit
Evga DG-87
 
#84
DDCustomMods
New Member
  • Total Posts : 54
  • Reward points : 0
  • Joined: 2016/12/14 12:58:55
  • Location: Gardnerville, NV
  • Status: offline
  • Ribbons : 0
Re: DDCM Desk Project: Unique. Simple. Powerful 2018/06/14 09:04:31 (permalink)
Knightviper
that is some build mate so clean




Thank you! We definitely loved making it 

Modders Unite! Current Build : DDCM Desk
Main Rig CPU:A10 - 5800k | Motherboard:FM2-A75MA-E35 | RAM:ADATA 2GB & PNY 8GB 1600 | Hard Drive:Corsair force 120 SSD | Power:Corsair TX650W
GPU:EVGA GeForce GTX 670 | Cooling:Corsair Hydro H60 | Case:Thermaltake Shark Aluminum Full Tower | OS:Windows 10 Pro 64bit
File/Backup/Minecraft Server CPU:Phenom II X4 945 3.0Ghz | Motherboard:Asus M5A88-V EVO | RAM:ADATA 6GB
Hard Drive:Western Digital WD3200 & Western Digital WD800 & Hitachi Desktar 160GB
GPU: None | Power:Raidmax RX 530W | Cooling:Xigmatek Loki | Case:XCLIO A380BK | OS:Ubuntu Server
#85
Page: < 123 Showing page 3 of 3
Jump to:
  • Back to Mobile