EVGA

Cosmos C700M

Page: < 12 Showing page 2 of 2
Author
Skylinar
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2019/04/15 05:25:22
  • Status: offline
  • Ribbons : 0
Re: Cosmos C700M 2019/08/06 13:45:25 (permalink)
Very nice build! Flashed to see more!
#31
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: Cosmos C700M 2019/08/07 14:25:47 (permalink)
Thanks Skylinar  I still need to do more work on the cable management part. touble tape on commander pro is not sticking. I think because of the heat from the back plate of the motherboard tray.
 
Speaking of Motherboard, It came with thermal pads for NVMe SSDs. My SSD came with a heatsink and when I installed it with the thermal pad, I think it was not connected properly because the thermal pad is a little bit thick. So I was wondering if that is OK to install the NVMe without the thermal pads.
#32
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: Cosmos C700M 2019/08/09 15:16:44 (permalink)
Quick benchie.
 

#33
Bepzinky
iCX Member
  • Total Posts : 281
  • Reward points : 0
  • Joined: 2016/04/30 13:15:31
  • Status: offline
  • Ribbons : 2
Re: Cosmos C700M 2019/08/10 15:48:52 (permalink)
Nice! I also have the C700M but haven't been able to make friends with it yet. What struck me the most is that after unscrewing the PSU cover, the paint around the screws literally flakes off, pretty bizarre. Also on some other places the paint quality is like a $50 cakes, you could almost scrape it off with a fingernail. Have you experienced anything similar with yours?
#34
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: Cosmos C700M 2019/08/10 16:45:45 (permalink)
Bepzinky
Nice! I also have the C700M but haven't been able to make friends with it yet. What struck me the most is that after unscrewing the PSU cover, the paint around the screws literally flakes off, pretty bizarre. Also on some other places the paint quality is like a $50 cakes, you could almost scrape it off with a fingernail. Have you experienced anything similar with yours?




Yes. There are 2 things I don't like about this case . First, The paint. So poorly done specially with a case with like 100 screws.
 
Second thing I don't about this case is that it is ideally for ATX motherboards, Although it supports E-ATX, the extra width of the E-ATX covers half of the cable management cutouts which makes it a little bit hard to route cables and properly do cable management.
 
but other than that, this case is bad ass. I really like it.
 
I had Corsair 1000D in mind, but that thing is massive and it is meant for WC. it's not worth it for air or AIO coolers. Cosmos 700M size is perfect , bu it just needed to properly support EATX like previous Cosmos 2 case, which I owned before.
#35
Vlada011
Omnipotent Enthusiast
  • Total Posts : 10257
  • Reward points : 0
  • Joined: 2012/03/25 00:14:05
  • Location: Belgrade-Serbia
  • Status: offline
  • Ribbons : 11
Re: Cosmos C700M 2019/08/11 05:41:28 (permalink)
Cable management is fantastic with Z390 Dark.
 

i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
http://www.evga.com
http://www.intel.com
http://www.nvidia.com
https://watercool.de
http://www.lian-li.com
https://www.youtube.com/watch?v=PHMun5xiRe0
 
https://xdevs.com/guide/2080ti_kpe/#intro
https://www.evga.com/articles/01386/evga-sr-3-dark/
 
 
 

 
 
#36
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: Cosmos C700M 2019/08/11 09:59:42 (permalink)
It sure is. This is the main reason I got it. I really like the inverted power connectors and moving the CPU power connectors next to the motherboard connectors. Also it has bad ass looks.
#37
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: Cosmos C700M 2019/08/13 12:28:47 (permalink)
Hello Guys. I want to ask you about something. I have been recently experiencing a very annoying problem. during gaming every now an then I get this weird annoying chip in FPS. It's not an FPS drop, just a weird chip. Not sure if it is related to G-sync. But I started noticing it after I connected the usb cable for the pump, installed Evga powerlink, Gigabyte HB SLI bridge, WD SSD dashboard and software for NZXT kraken. I believe I had iCUE instaled before. I am quite sure I was not seeing this before. I really don't want to go through reinstalling windows again, but I have a feeling it is something I installed recently but not sure what. Even when I close all the apps I still get this weird chip.
 
I don't think it is hardware related. Maybe you guys can share similar experiences ? My last resort is to reinstall windows and not install anything except drivers and games and test again.
 
Update: I did some benchmarks, superposition 8k optimized, 99% utilization on both cards, it was butter smooth during the entire benchmark. Ran Metro Exodus 3 runs, and it was also butter smooth. Not sure if it is just my eyes but I am sure I started noticing this recently. Anyway, I will keep messing around with it. I might reinstall Windows and see if that makes a difference.
 
Update: I tried Forza Horizon 4 . WOW this game is so beautiful. Not a single stutter with non stop racing. So I guess It just me being OCD or something. I'll keep testing different games.
 
Update: OK ... I did alot of testing and messing around. The problem is definitely with SLI somehow. When SLI is disabled, No chipping , micro stuttering, When SLI enabled, I notice microstuttering. I saw this with Gigabyte bridge and asus bridge, both are HB. I put back the ribbon bridge, and no stuttering !!! **** is that ? I will try to look for a better bridge. but not sure how is this possible ?!
 
Update: OK .. scratch the ribbon thing. All Bridges have exactly the same behavior . standard or HB. Only when disabling SLI it goes away. I'll just live with it for now until I get the new cards.
post edited by mhijazi - 2019/08/14 22:04:12
#38
Sleinous
EVGA Forum Moderator
  • Total Posts : 7663
  • Reward points : 0
  • Joined: 2010/06/12 12:22:01
  • Location: France
  • Status: offline
  • Ribbons : 32
Re: Cosmos C700M 2019/08/23 10:18:33 (permalink)
Loving the lighting effects

My Affiliate Code: GL1IAAFWJF
#39
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: Cosmos C700M 2019/08/23 16:36:32 (permalink)
Thanks . It does look nice . I really the case lighting effects and the fans too.


Just a quick update regarding the stuttering , stuttering goes away when I set the power mode to prefer maximum power. Each card works perfectly fine alone. Stuttering comes when SLI and G-Sync is enabled. As long as stuttering is gone I am happy but I am just wondering what could cause this ?! Any ideas ?! I tested with my 1070s cards and I dont see stuttering with default nvidia power settings which is prefer optimal power.
post edited by mhijazi - 2019/08/23 16:40:28
#40
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: Cosmos C700M 2019/09/01 23:43:23 (permalink)
Hello,
 
I still have micro stuttering. It is really annoying while playing games. At this point, I really don't know if it is a hardware or software , or OS related. It is not a sudden drop in FPS, it is just a single annoying chip / stutter that happens every now and then. it's like when you are running in a straight line and then you think about stopping for a second but gets pushed forward because someone is pushing you forward. stupid example but this is exactly what happens.
 
I am passing everything stress test without any crashing (Futuremark Firestrike Ultra, superposition, Heaven) I only see random micro stuttering when G-Sync is enabled. I ran out of ideas on what to do next. Just waiting for a new version of PX1, or a BIOS update for Z390 Dark, or a major Windows 10 update to see if the issue is still there. Some games stutter with PX1 on, some games doesn't. For instance , Forza Horizon 4 runs flawlessly without a single stutter. DOTA 2 only stutters when PX1 is running , GTA V has this annoying micro stutter every minute or so with or without PX1. Farcry 5 stutters as well.  
post edited by mhijazi - 2019/09/01 23:47:51
#41
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile