Gone Cruising
SSC Member
- Total Posts : 754
- Reward points : 0
- Joined: 2008/02/17 23:10:31
- Location: Clearlake Oaks, CA
- Status: offline
- Ribbons : 45
EVGA Spider Mini ITX A Custom Build by Me for Me.....G.C.   Hello again!!!! It's me messing around with a new design. This time I wanted a really small form factor rig that I could loan to my friends and family when I (always) end up fixing theirs. Now that I look at it, it's not leaving my site (scared it will get scratched or damaged) There's not much in the case as I wanted it to be as clean as possible with the cables and be extremely low budget. I think I achieved that....the low budget part..... Specs: - Case = 6" wide x 12" tall x 14" deep,
- Acrylic = 3/8", 3/16", and 1/8" colors of black, white, and smoked
- Mobo = ASUS P8H61-I (REV 3.0) LGA 1155 Mini ITX
- Memory = CORSAIR XMS 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333
- Processor = Intel Celeron G530 Sandy Bridge 2.4GHz LGA 1155 Dual Core
- PSU = Xion Old School ATX PSU 650W
- GPU = nothing yet, anyone want to donate, EVGA perhaps??? Will fit a GPU up to 13" length
- Fans = 140mm Cooler Master up front and a TT 120mm up top
- CPU Cooling = waiting for my Corsair H40 to come back from RMA (running stock intel for now)
- HD = for now an old WD 150GB Raptor, yes I said Raptor
 (low budget as I said) can hole two HD's
The case was fun to build and a little tedious with imbedding the spider into the black acrylic. The front 140mm fan is atached magnetically using adhesive magnetic sheet. With this case I finally figured out how to flush mount the fan grills by using two pieces of acrylic. I have no idea why I didn't think of it a long time ago??? Learn something new every day!!! I need to go back and figure out how I must have changed the I/O shield cut out...it ended up being a bit too small!!! Anyways, here's the final pic's of the case and a link to all the pic's of the build in progress....enjoy and thank you for looking!!! http://s954.photobucket.com/albums/ae26/Lazerwerx/Spider%20ITX/?start=all         
post edited by Gone Cruising - 2012/02/26 17:40:01
Gigabyte Z390 Aorus Ultra Intel Core I9-9900K Corsair 32gb DDR4 EVGA RTX 2070 Super EVGA 850W Gold 2 x 1TB Samsung SSD 2 x 3TB HD's in Raid 1 Kustom Case https://www.heatware.com/u/67033/to 
|
kayfaei
Superclocked Member
- Total Posts : 172
- Reward points : 0
- Joined: 2010/11/24 13:36:36
- Location: Tennessee
- Status: offline
- Ribbons : 0
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/26 18:41:43
(permalink)
I'm very scared of spiders but that one is badass computer you've made  I wouldn't be scared of that one ;p
Setup: Case:NZXT Phantom Black Full Tower CPU:AMD Phenom II X4 965 Black Edition Deneb 3.4GHz Socket AM3 Quad-Core Processor MOBO:ASUS Sabertooth 990FX AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard CPUCOOLER:Loki sd963 by xigmatek HHD:Seagate Barracuda 1TB 7200 RPM SATA 6.0Gb/s 3.5"Hard Drive /500GB HHD OS:Windows 7 Professional 64 bit PSU:Thermaltake Black Widow 850W power supply RAM:G.SKILL Ripjaws DDR3 8GB(2X4GB) X2 totaling 16gigs GPU:EVGA Geforce Gtx 960 4gb FTW Edition My affilate code:WYX7H7IJDY
|
w4ss4b3
CLASSIFIED Member
- Total Posts : 3935
- Reward points : 0
- Joined: 2011/12/31 04:50:57
- Location: Please use MY Affiliate code: JHMQJKA3CM
- Status: offline
- Ribbons : 21
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/26 18:46:44
(permalink)
|
bhk1004
SSC Member
- Total Posts : 976
- Reward points : 0
- Joined: 2010/05/07 14:50:17
- Status: offline
- Ribbons : 1
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/26 19:23:32
(permalink)
|
knightsilver
Omnipotent Enthusiast
- Total Posts : 9189
- Reward points : 0
- Joined: 2008/11/21 13:42:06
- Location: Nebraska
- Status: offline
- Ribbons : 14
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/26 20:34:10
(permalink)
|
nomadnomad7
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2008/07/09 18:18:19
- Location: PDX
- Status: offline
- Ribbons : 2
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/26 20:40:32
(permalink)
| ASUS ROG VI | i9-7940 | Caselabs M10 | 64gb Corsair Dom Platinum 3333 | Intel 750 | SLI GTX-1080ti | EVGA 1600 T2 | | Z9PE-D8 WS | 2x E5-2660 || ASUS MIVE-Z | 2600k | HEATWARE 
|
flasher4q
FTW Member
- Total Posts : 1323
- Reward points : 0
- Joined: 2006/04/16 12:35:42
- Location: So. Cal. L.B.
- Status: offline
- Ribbons : 0
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/26 21:32:14
(permalink)
Asus ROG Strix B550-F gaming Ryzen7 5800x Corsair Dominator Platinum 32 Gig 3600 Samsung 1T 980 PRO PCIe 4.0 Samsung 500Gig 970 Evo PCIe 3.0 MSI GTX 1080Ti Thermaltake Pump/Res combo Primochill 2 120x2 Radiators Bitspower G1/4" Premium master fittings Corsair RM 850x CoolerMaster H500P Case EK-Quantum Velocity D CPU cooler Bose Companion2 Speakers
|
Gone Cruising
SSC Member
- Total Posts : 754
- Reward points : 0
- Joined: 2008/02/17 23:10:31
- Location: Clearlake Oaks, CA
- Status: offline
- Ribbons : 45
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/26 22:22:11
(permalink)
bhk1004
lol you want a 9500 GT?
Thank you everyone!!! Comments are much appreciated!!! LOL!!! nah, im good, I do have several 9800GTX's laying around here and a GT 240. How's your rig doing???
Gigabyte Z390 Aorus Ultra Intel Core I9-9900K Corsair 32gb DDR4 EVGA RTX 2070 Super EVGA 850W Gold 2 x 1TB Samsung SSD 2 x 3TB HD's in Raid 1 Kustom Case https://www.heatware.com/u/67033/to
|
jeffro66
CLASSIFIED Member
- Total Posts : 3628
- Reward points : 0
- Joined: 2007/01/19 13:23:32
- Location: nc
- Status: offline
- Ribbons : 8
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/27 04:33:17
(permalink)
|
knightsilver
Omnipotent Enthusiast
- Total Posts : 9189
- Reward points : 0
- Joined: 2008/11/21 13:42:06
- Location: Nebraska
- Status: offline
- Ribbons : 14
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/27 09:38:45
(permalink)
Wait a min, did yall see any inside pics ?
|
Gone Cruising
SSC Member
- Total Posts : 754
- Reward points : 0
- Joined: 2008/02/17 23:10:31
- Location: Clearlake Oaks, CA
- Status: offline
- Ribbons : 45
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/27 14:44:46
(permalink)
Gigabyte Z390 Aorus Ultra Intel Core I9-9900K Corsair 32gb DDR4 EVGA RTX 2070 Super EVGA 850W Gold 2 x 1TB Samsung SSD 2 x 3TB HD's in Raid 1 Kustom Case https://www.heatware.com/u/67033/to
|
cj3waker
SSC Member
- Total Posts : 881
- Reward points : 0
- Joined: 2007/12/17 00:02:46
- Location: tahoe
- Status: offline
- Ribbons : 11
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/27 15:13:08
(permalink)
amazing work kirk. I LOVE the flush grills. Your really seem to have upped the build quality on this one. Me gusta mucho!
|
buggyruth
FTW Member
- Total Posts : 1080
- Reward points : 0
- Joined: 2011/08/29 16:57:57
- Status: offline
- Ribbons : 3
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/27 16:18:04
(permalink)
Very nice! 
+1 If you like my Mods-Rig http://www.heatware.com/eval.php?id=78759 COOLER MASTER HAF X RC-942-KKN1 / EVGA Z77-FTW / Intel I7-3770K / 2 X Corsair Force Series GT 240GB. SSD Raid-0 / Western Digital Caviar Black WD2002FAEX / G.SKILL Trident X Series F3-2400C10D-16GTX / 2 X EVGA GeForce GTX 670-FTW+4GB. (04G-P4-3673-KR) with EK GeForce 680 GTX VGA Liquid Cooling Blocks - Acetal CSQ (EK-FC680 GTX - Acetal CSQ) / Swiftech Maelstrom 51/4" dual bay reservoir with dual MCP35X pumps / RayStorm CPU WaterBlock (Intel) Copper / XSPC RX360 Rad & XSPC EX140
|
knightsilver
Omnipotent Enthusiast
- Total Posts : 9189
- Reward points : 0
- Joined: 2008/11/21 13:42:06
- Location: Nebraska
- Status: offline
- Ribbons : 14
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/27 17:03:13
(permalink)
Now, thats just plain awesome......
|
voodoo do-er 
CLASSIFIED Member
- Total Posts : 4418
- Reward points : 0
- Joined: 2011/09/02 10:20:58
- Location: 1934~2012 Eduard Khil
- Status: offline
- Ribbons : 9
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/27 22:57:07
(permalink)
|
HeThing
CLASSIFIED ULTRA Member
- Total Posts : 6764
- Reward points : 0
- Joined: 2010/05/11 07:45:49
- Location: 6F4-72Y-6A8J <-- My Affiliate Code :D
- Status: offline
- Ribbons : 42
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/28 04:22:29
(permalink)
Awesome craftmanship!
The result is both clean, tight and tidy IMO!
|
vietexan
New Member
- Total Posts : 51
- Reward points : 0
- Joined: 2008/08/31 13:28:08
- Status: offline
- Ribbons : 0
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/28 09:11:01
(permalink)
i7 2600k 260 gtx Corsair 800d
|
eviling
SSC Member
- Total Posts : 573
- Reward points : 0
- Joined: 2007/09/29 16:55:43
- Status: offline
- Ribbons : 7
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/28 10:51:09
(permalink)
this is the direction we should start building to force the hand of R&D to want to build smaller. it is up to us to tell them what we want, and we should be wanting quieter and smaller.
my build CPU - AMD 3900x Ram - Gskill neo ddr4 3600 Case - Cooler Master Cosmos II monitors - XG32VQ asus 32" and 28" Samsung sideHard drive - gigabyte aorus nvme gen4 Video cards - 5700xt Motherboard - asus x570 hero Power supply - evga 1000w platnum
|
zophar
CLASSIFIED Member
- Total Posts : 4749
- Reward points : 0
- Joined: 2008/08/26 09:48:56
- Location: KC,MO
- Status: offline
- Ribbons : 26
Re:Completed: Mini ITX EVGA Spider Custom Acrylic Build
2012/02/28 11:03:25
(permalink)
G.C. you never cease to amaze me with your work. Keep it up. Can't wait to see what you come up with next.
|