frankd3My Z590 FTW bios shows my CLC360 pump speed at a little over 1400rpm (1401-1410).But Flow Control shows 2x that amount, a little over 2800. (2820-2850) The pump is powered by the pump header which I have set to auto and MAX to keep the pump at max rpm and power the fans controlled by the CLC.This is my first experience with water cooling but I think 1400 sounds right. The funny thing is that AIDA64 shows both. One is "Water Pump" (1410) and the other is "Pump #1 (Krakan X-1)" (2850) Which should I trust, bios or Flow Control?
HeavyHemi 2800 RPM is about right for 100% pump speed on an AIO pump.
frankd3 Thanks. That's what I needed.Then the bios is showing half speed.
rgarvey58 Why does the BIOS show half speed? I have my CLC360 plugged into header PUMP_FAN1 on an MSI B550 and it shows ~1440 RPM. Before installing Flow Control, HWInfo shows the CLC as "Kraken Xxx" and correctly shows the pump RPM at ~2880 RPM. Once Flow Control is installed, assume the driver it installs takes over and it shows ~2880 RPM as well.