https://potatopc.net/abkoncore-unveils-the-ramesses-310-tower-case/ Abkoncore today unveiled the Ramesses 310, a low-depth ATX full-tower case that combines tempered glass with matte-black steel. Inside, the case positions the ATX motherboard below an upper compartment that holds the PSU and drive bays. With height compensating for depth, the case is able to hold up to three 240 mm x 120 mm radiators, one each along the bottom-, rear-, and upper side panels. The motherboard tray boasts of full-ATX support as it features 9 expansion slots, so you could install a triple-slot graphics card even in the bottom-most slot.
Storage options on the Abkoncore Ramesses 310 include three 3.5-inch drive bays in the upper compartment, and two 2.5-inch mounts behind the motherboard tray. Six Abkoncore Spider Spectrum 120 mm fans come included with the case, with an internal RGB LED controller that takes in RF remote control input. RGB embellishment also frame each of the front-panel ports: four USB 3.1 type-A, HDA jacks, and the power/reset buttons. Measuring 220 mm x 550 mm x 330 mm (WxHxD), the case weighs 9 kg. Available now, the Ramesses 310 is priced at 160€.
It is difficult from the pictures for me to make a detailed opinion. I hope that the front design is good enough for good air intake. I like the RGB effects. 160 Euros is fair in my opinion.