EVGA

Hot!3090 FTW3 Ultra cannot get a video signal

Author
browe1891
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2020/11/18 14:35:25
  • Status: offline
  • Ribbons : 0
2020/11/18 14:57:18 (permalink)
Hi all, just purchased an FTW3 Ultra 3090. I stuck it into my computer and i cannot get it to show video. The computer does turn on though and the 3090 does flash it lights. Here are my PC specs:
650 watt PSU (the one that comes in a nzxt H1 case)
AS Rock Fatality B450 motherboard
16gb ddr4 ram.
Ryzen 7 3700x
 
If i stick my 2070 super back in, it works no problem.
Hoping someone can help me out,
Thanks all!
#1

25 Replies Related Threads

    gabolton
    Superclocked Member
    • Total Posts : 222
    • Reward points : 0
    • Joined: 2011/01/16 06:42:06
    • Status: online
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 15:11:26 (permalink)
    Wild guess here but a 650w PSU isn't going to cut it.
     
    Personally, I wouldn't go with anything less than a top tier 850w PSU and would likely opt for a 1000w.

    10G-P5-3885-KR 9/17/2020 5:57:01 PM Yes
    10G-P5-3897-KR 9/17/2020 5:56:32 PM Yes
     
    Current Specs
    i9-10850k @5.0
    Asus Strix Z490-E
    Seasonic Prime TX-1000
    Corsair Dominator Platinum 3466 2x 16gb
    FTW3 Ultra 3080 (with black lips)
    Samsung 970 Evo Plus 1TB Nvme
    Crucial MX500 2 TB ssd
    Arctic Freezer 280 Rev 2
    7x Noctua AF-A12x25 pwm fans
    Lian-Li O11 Dynamic XL
    #2
    Wyn10
    New Member
    • Total Posts : 37
    • Reward points : 0
    • Joined: 2013/08/01 13:36:58
    • Status: offline
    • Ribbons : 1
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 15:16:11 (permalink)
    gabolton
    Wild guess here but a 650w PSU isn't going to cut it.
     
    Personally, I wouldn't go with anything less than a top tier 850w PSU and would likely opt for a 1000w.


    I'm havin same issue as op with 850w, only got 10 seconds of gameplay outta 3090. Sli 1080s work fine on same system

    CPU: Intel 9900k @ 5Ghz
    CPU COOLER: EVGA CLC 360
    GPU: EVGA RTX 3090 FTW3 ULTRA
    MOBO: MSI MPG Z390M GAMING EDGE AC
    RAM: G.Skill Trident Z DDR4 (32GB)
    PSU: EVGA SuperNOVA 850 G2
    SSD: Samsung 860 Evo x2 + Samsung 840 Pro
    KB: GMMK TKL /​w Gateron ​Green swit​ches
    MONITOR: Samsung Odyssey G9 + Acer Predator X34
    CASE: InWin 309
    #3
    browe1891
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2020/11/18 14:35:25
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 15:20:09 (permalink)
    i agree but i would at least think i could get a video signal, just a blank screen for me
    #4
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 25224
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 119
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 15:23:25 (permalink)
    Which Nvidia Driver ?
     
    Did the one you already have on that supports 3090 ?
     
     
    Did you  -  Connected all 3 8-pin power sockets ?
     
    Confirm PCIe is fully installed & locked ?
     
     
     
    Might also want to try a Power flush
     
          1 - Shut down
     
          2 - Unplug PC & anything connected to PC that is plugged into the wall (monitor, printer, USB hub ...)
     
          3 - Now hold "start button" in for 20 sec to discharge capacitors ....
     
          4 - Plug in & reboot
     
     
    Stop 3rd part security software ... (go - offline first)
     
     
     
    Check this thread for details:  Comprehensive Windows 10 Black Screen Trouble shooting Guide

    RTX Project EVGA X99 FTWK 2xEVGA2080Ti EVGA1200P2  Nibbler EVGA X99 Classified 3-GPU Water cooled 1600P2 AIO Folding  X99 2x1080Ti FTW3 Hybrid, 1200P
    Thank You for Your Support      I'm a Volunteer Moderator on the EVGA Forums ... Not an EVGA employee

    #5
    browe1891
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2020/11/18 14:35:25
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 15:29:16 (permalink)
    Cool GTX
    Which Nvidia Driver ?
     
    Did the one you already have on that supports 3090 ?
     
     
    Did you  -  Connected all 3 8-pin power sockets ?
     
    Confirm PCIe is fully installed & locked ?
     
     
     
    Might also want to try a Power flush

         1 - Shut down

         2 - Unplug PC & anything connected to PC that is plugged into the wall (monitor, printer, USB hub ...)

         3 - Now hold "start button" in for 20 sec to discharge capacitors ....

         4 - Plug in & reboot
     
     
    Stop 3rd part security software ... (go - offline first)
     
     
     
    Check this thread for details: 


    All 3 power connectors are connected but i have not installed the new drivers...I am able to do this with the 2070super installed?
    #6
    Sajin
    EVGA Forum Moderator
    • Total Posts : 44314
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 197
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 16:19:17 (permalink)
    Is your bios fully up to date? Try another pci-e slot if available. Try all the outputs on the gpu. Make sure your monitor is set to the correct source.

    Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
     

     
    #7
    browe1891
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2020/11/18 14:35:25
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 17:07:28 (permalink)
    Sajin
    Is your bios fully up to date? Try another pci-e slot if available. Try all the outputs on the gpu. Make sure your monitor is set to the correct source.


    i updated my bios a few months ago so its not super old...I cant try another slot since is only a 1 slot motherboard. 
     
    I tried all the outputs and still nothing. It powers up though and fans spin for a bit
    #8
    gabolton
    Superclocked Member
    • Total Posts : 222
    • Reward points : 0
    • Joined: 2011/01/16 06:42:06
    • Status: online
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 17:20:50 (permalink)
    Honestly, I'd go buy a new quality PSU. A minimum of 850w so it'll have 3x separate PCIE cables and use those to connect to your 3090.
     
    @Wyn10 How old is your PSU? How do you have it connected to the 3090? Not positive on this but you might want to check the PSU thread. https://forums.evga.com/We-need-to-have-a-thread-of-what-PSU-people-have-and-RTX-3080-or-3090-and-is-WORKING-m3118557.aspx.
     
    If I recall correctly the G2 was one of the PSU's that people had issues with trying to power a 30xx card.
    post edited by gabolton - 2020/11/18 17:23:41

    10G-P5-3885-KR 9/17/2020 5:57:01 PM Yes
    10G-P5-3897-KR 9/17/2020 5:56:32 PM Yes
     
    Current Specs
    i9-10850k @5.0
    Asus Strix Z490-E
    Seasonic Prime TX-1000
    Corsair Dominator Platinum 3466 2x 16gb
    FTW3 Ultra 3080 (with black lips)
    Samsung 970 Evo Plus 1TB Nvme
    Crucial MX500 2 TB ssd
    Arctic Freezer 280 Rev 2
    7x Noctua AF-A12x25 pwm fans
    Lian-Li O11 Dynamic XL
    #9
    Necrophyte
    New Member
    • Total Posts : 11
    • Reward points : 0
    • Joined: 2018/02/17 19:37:37
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 17:36:23 (permalink)
    Yes, 650W really isn't enough. I'm running mine fine on a 850W G5. But even on the Video cards specs, EVGA recommends a min of 750W.
    On Paper the NZXT H1 looks ok (Was looking at the specs) But not sure how you connected it. There is only 2 VGA connectors and 1 CPU (Sorry going off image).
    Do you have it running an 8 Pin PCIE and an 8 + 8 Pin PCIE? This is fine if you are, I am doing the same thing. Might not be fine if you are running it as SATA connector running to 8 PIN PCIE.
    Sorry if these seem off questions just trying to help exhaust all options. 
    650W Should be enough for it to turn on though. Just maybe not when running 100% load.
    To give you an idea, Just the CPU and GPU are running at 475W alone. Not including anything else you have running. Cooler, M.2, MB, HDDs, Case fans. All add up. 
    #10
    browe1891
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2020/11/18 14:35:25
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 17:41:26 (permalink)
    Necrophyte
    Yes, 650W really isn't enough. I'm running mine fine on a 850W G5. But even on the Video cards specs, EVGA recommends a min of 750W.
    On Paper the NZXT H1 looks ok (Was looking at the specs) But not sure how you connected it. There is only 2 VGA connectors and 1 CPU (Sorry going off image).
    Do you have it running an 8 Pin PCIE and an 8 + 8 Pin PCIE? This is fine if you are, I am doing the same thing. Might not be fine if you are running it as SATA connector running to 8 PIN PCIE.
    Sorry if these seem off questions just trying to help exhaust all options. 
    650W Should be enough for it to turn on though. Just maybe not when running 100% load.
    To give you an idea, Just the CPU and GPU are running at 475W alone. Not including anything else you have running. Cooler, M.2, MB, HDDs, Case fans. All add up. 


    yeah exactly im running an 8 pin with another 8 + 8 pin. If I unplug any of the three it doesn't turn on so i know those are working.
    I agree it would at least turn on though...no image at all sadly.
    #11
    Necrophyte
    New Member
    • Total Posts : 11
    • Reward points : 0
    • Joined: 2018/02/17 19:37:37
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 17:57:31 (permalink)
    Forgive me if I'm suggesting stuff others have already suggested. 
    The OC switch.. is it in stock or OC, Can you try toggling it on both and see?
    Are there any devices that you can unplug temporarily just to see. I don't know much about NZXT's PSU's, but just trying to remove anything that may or may not cause issues. 
    Like unplug any HDD power, anything at all. Even for a few seconds just to see if the screen will come on.
    #12
    Sajin
    EVGA Forum Moderator
    • Total Posts : 44314
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 197
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 18:00:44 (permalink)
    browe1891
    Sajin
    Is your bios fully up to date? Try another pci-e slot if available. Try all the outputs on the gpu. Make sure your monitor is set to the correct source.


    i updated my bios a few months ago so its not super old...I cant try another slot since is only a 1 slot motherboard. 
     
    I tried all the outputs and still nothing. It powers up though and fans spin for a bit


    I'd suggest testing the card in another pc just to make sure the card is ok.

    Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
     

     
    #13
    Wyn10
    New Member
    • Total Posts : 37
    • Reward points : 0
    • Joined: 2013/08/01 13:36:58
    • Status: offline
    • Ribbons : 1
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/18 21:57:35 (permalink)
    gabolton
    Honestly, I'd go buy a new quality PSU. A minimum of 850w so it'll have 3x separate PCIE cables and use those to connect to your 3090.
     
    @Wyn10 How old is your PSU? How do you have it connected to the 3090? Not positive on this but you might want to check the PSU thread. https://forums.evga.com/We-need-to-have-a-thread-of-what-PSU-people-have-and-RTX-3080-or-3090-and-is-WORKING-m3118557.aspx.
     
    If I recall correctly the G2 was one of the PSU's that people had issues with trying to power a 30xx card.




    Using a Supernova 850 G2 thats 4 years old, 6+2 cables, nothing daisy chained.  Kinda weird that's the issue when Sli 1080s are fine.
     
    My PSU is on the list in that topic.


    Edit: I just put the 3090 in and set the primary graphics adapter to onboard in bios and windows doesn't even detect the 3090 in device manager. With 3090 as primary windows doesn't even load, detecting this with my ram rgb not changing settings when windows should be booting.

    After a month and a half of waitin this blows lol.
    post edited by Wyn10 - 2020/11/18 23:31:49

    CPU: Intel 9900k @ 5Ghz
    CPU COOLER: EVGA CLC 360
    GPU: EVGA RTX 3090 FTW3 ULTRA
    MOBO: MSI MPG Z390M GAMING EDGE AC
    RAM: G.Skill Trident Z DDR4 (32GB)
    PSU: EVGA SuperNOVA 850 G2
    SSD: Samsung 860 Evo x2 + Samsung 840 Pro
    KB: GMMK TKL /​w Gateron ​Green swit​ches
    MONITOR: Samsung Odyssey G9 + Acer Predator X34
    CASE: InWin 309
    #14
    browe1891
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2020/11/18 14:35:25
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/19 10:19:53 (permalink)
    Wyn10
    gabolton
    Honestly, I'd go buy a new quality PSU. A minimum of 850w so it'll have 3x separate PCIE cables and use those to connect to your 3090.
     
    @Wyn10 How old is your PSU? How do you have it connected to the 3090? Not positive on this but you might want to check the PSU thread.
     
    If I recall correctly the G2 was one of the PSU's that people had issues with trying to power a 30xx card.




    Using a Supernova 850 G2 thats 4 years old, 6+2 cables, nothing daisy chained.  Kinda weird that's the issue when Sli 1080s are fine.
     
    My PSU is on the list in that topic.


    Edit: I just put the 3090 in and set the primary graphics adapter to onboard in bios and windows doesn't even detect the 3090 in device manager. With 3090 as primary windows doesn't even load, detecting this with my ram rgb not changing settings when windows should be booting.

    After a month and a half of waitin this blows lol.

    oh man i feel for you, let me know if you find a resolution. I find it hard to believe that the 3090 is bad out of bock. Could be something with my motherboard but i really have exhausted all options
    #15
    Wyn10
    New Member
    • Total Posts : 37
    • Reward points : 0
    • Joined: 2013/08/01 13:36:58
    • Status: offline
    • Ribbons : 1
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/19 12:05:20 (permalink)
    browe1891
    Wyn10
    gabolton
    Honestly, I'd go buy a new quality PSU. A minimum of 850w so it'll have 3x separate PCIE cables and use those to connect to your 3090.

    @Wyn10 How old is your PSU? How do you have it connected to the 3090? Not positive on this but you might want to check the PSU thread.

    If I recall correctly the G2 was one of the PSU's that people had issues with trying to power a 30xx card.




    Using a Supernova 850 G2 thats 4 years old, 6+2 cables, nothing daisy chained.  Kinda weird that's the issue when Sli 1080s are fine.

    My PSU is on the list in that topic.


    Edit: I just put the 3090 in and set the primary graphics adapter to onboard in bios and windows doesn't even detect the 3090 in device manager. With 3090 as primary windows doesn't even load, detecting this with my ram rgb not changing settings when windows should be booting.

    After a month and a half of waitin this blows lol.

    oh man i feel for you, let me know if you find a resolution. I find it hard to believe that the 3090 is bad out of bock. Could be something with my motherboard but i really have exhausted all options


    Waiting on support ticket hoping for a miracle fix otherwise rma'ing.

    CPU: Intel 9900k @ 5Ghz
    CPU COOLER: EVGA CLC 360
    GPU: EVGA RTX 3090 FTW3 ULTRA
    MOBO: MSI MPG Z390M GAMING EDGE AC
    RAM: G.Skill Trident Z DDR4 (32GB)
    PSU: EVGA SuperNOVA 850 G2
    SSD: Samsung 860 Evo x2 + Samsung 840 Pro
    KB: GMMK TKL /​w Gateron ​Green swit​ches
    MONITOR: Samsung Odyssey G9 + Acer Predator X34
    CASE: InWin 309
    #16
    browe1891
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2020/11/18 14:35:25
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/19 15:12:07 (permalink)
    Wyn10
    browe1891
    Wyn10
    gabolton
    Honestly, I'd go buy a new quality PSU. A minimum of 850w so it'll have 3x separate PCIE cables and use those to connect to your 3090.

    @Wyn10 How old is your PSU? How do you have it connected to the 3090? Not positive on this but you might want to check the PSU thread.

    If I recall correctly the G2 was one of the PSU's that people had issues with trying to power a 30xx card.




    Using a Supernova 850 G2 thats 4 years old, 6+2 cables, nothing daisy chained.  Kinda weird that's the issue when Sli 1080s are fine.

    My PSU is on the list in that topic.


    Edit: I just put the 3090 in and set the primary graphics adapter to onboard in bios and windows doesn't even detect the 3090 in device manager. With 3090 as primary windows doesn't even load, detecting this with my ram rgb not changing settings when windows should be booting.

    After a month and a half of waitin this blows lol.

    oh man i feel for you, let me know if you find a resolution. I find it hard to believe that the 3090 is bad out of bock. Could be something with my motherboard but i really have exhausted all options


    Waiting on support ticket hoping for a miracle fix otherwise rma'ing.

    I contacted support this morning, i was wishing for a magical fix but the support agent wanted to me RMA it as well
    #17
    browe1891
    New Member
    • Total Posts : 10
    • Reward points : 0
    • Joined: 2020/11/18 14:35:25
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/21 17:21:22 (permalink)
    UPDATE!!! GOT IT WORKING... I thought it wasnt a bios issue since I just updated it a few months back...welp turns out I installed the lastest bios (released back in july) and it worked no problem! 
     
    I was just going to RMA it but I took a last effort and installed in into my GF's PC and it worked on hers...hope this helps someone out
     
    Moral of the story: UPDATE YOUR BIOS
    #18
    Wyn10
    New Member
    • Total Posts : 37
    • Reward points : 0
    • Joined: 2013/08/01 13:36:58
    • Status: offline
    • Ribbons : 1
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/11/21 18:22:44 (permalink)
    browe1891
    UPDATE!!! GOT IT WORKING... I thought it wasnt a bios issue since I just updated it a few months back...welp turns out I installed the lastest bios (released back in july) and it worked no problem! 
     
    I was just going to RMA it but I took a last effort and installed in into my GF's PC and it worked on hers...hope this helps someone out
     
    Moral of the story: UPDATE YOUR BIOS


    My last bios update was jan 2 2020 and had it installed within 2 weeks :/

    CPU: Intel 9900k @ 5Ghz
    CPU COOLER: EVGA CLC 360
    GPU: EVGA RTX 3090 FTW3 ULTRA
    MOBO: MSI MPG Z390M GAMING EDGE AC
    RAM: G.Skill Trident Z DDR4 (32GB)
    PSU: EVGA SuperNOVA 850 G2
    SSD: Samsung 860 Evo x2 + Samsung 840 Pro
    KB: GMMK TKL /​w Gateron ​Green swit​ches
    MONITOR: Samsung Odyssey G9 + Acer Predator X34
    CASE: InWin 309
    #19
    thomasdadams
    New Member
    • Total Posts : 57
    • Reward points : 0
    • Joined: 2020/12/05 12:23:18
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/12/25 19:56:02 (permalink)
    How did you update the bios if no display? I don’t have another gpu and the screen won’t work.
    #20
    Wyn10
    New Member
    • Total Posts : 37
    • Reward points : 0
    • Joined: 2013/08/01 13:36:58
    • Status: offline
    • Ribbons : 1
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/12/25 20:04:13 (permalink)
    Received my replacement 3090 last week and been smooth sailing. Serial starts with 2014 and has red lips.

    thomasdadams
    How did you update the bios if no display? I don’t have another gpu and the screen won’t work.


    You can use onboard video from motherboard if your cpu supports it.

    CPU: Intel 9900k @ 5Ghz
    CPU COOLER: EVGA CLC 360
    GPU: EVGA RTX 3090 FTW3 ULTRA
    MOBO: MSI MPG Z390M GAMING EDGE AC
    RAM: G.Skill Trident Z DDR4 (32GB)
    PSU: EVGA SuperNOVA 850 G2
    SSD: Samsung 860 Evo x2 + Samsung 840 Pro
    KB: GMMK TKL /​w Gateron ​Green swit​ches
    MONITOR: Samsung Odyssey G9 + Acer Predator X34
    CASE: InWin 309
    #21
    thomasdadams
    New Member
    • Total Posts : 57
    • Reward points : 0
    • Joined: 2020/12/05 12:23:18
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2020/12/25 20:09:07 (permalink)
    Got it! Seems like the amd 5900x doesn’t support it. My 3090 was working for about 2 weeks then it’s no longer being recognized. Look like I will have to rma it. Thank you for your help.
    #22
    Raymoe3083
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2020/11/14 06:25:56
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2021/01/14 04:24:29 (permalink)
    Received 3090 ultra on monday, no display, rgb illuminated. Fix = change version of windows to home from enterprise, and update bios to f20a. Card is working as it should now
    #23
    Raymoe3083
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2020/11/14 06:25:56
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2021/01/14 04:28:41 (permalink)
    Yes, had to use onboard video, or old card to get video. As long you dont have any red led illuminated by the power dongles you still have a good graphics card. Make sure you are using a version of windows 10 that the latest nvidia driver supports 461.09. And ofcourse update your bios, becareful doing so. Goodluck ...
    #24
    thomasdadams
    New Member
    • Total Posts : 57
    • Reward points : 0
    • Joined: 2020/12/05 12:23:18
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2021/01/16 19:03:21 (permalink)
    Giving an update here. Got my replacement 3090 from EVGA a couple of day ago. Was playing league and my screen goes back and when I look at the gpu one red light is on the middle power port. Well here goes another RMA. So annoying. Second 3090 to fail. I have a 1000w PSU EVGA platinum.
    #25
    moonlight123
    New Member
    • Total Posts : 100
    • Reward points : 0
    • Joined: 2021/01/17 01:43:44
    • Status: offline
    • Ribbons : 0
    Re: 3090 FTW3 Ultra cannot get a video signal 2021/01/18 08:06:36 (permalink)
    you can try to update your bios
    #26
    Jump to:
  • Back to Mobile